2b Finish Stainless Steel Plate Price and SS Sheet Stock in Thickness 1mm to 120 mm at Dealer Cost ex Mumbai
Stainless steels are alloys that contain more than 11% chromium of their total weight. In addition to chromium, the other elements include molybdenum, nickel, vanadium, copper, titanium, niobium, nitrogen, etc. Depending on the quality or the grade of steel required by the application, any well-known Stainless Steel Sheet Suppliers in Mumbai would be able to guide you. Sheet are available across the world in different shapes and sizes. In order to get better corrosion resistance properties, some Stainless Steel Sheet Suppliers will recommend coating the sheet with finishes such as galvanization, or zinc coating or even getting it colored.
Stainless Steel Sheet
SA240 SS Coil
Stainless Steel Plate
4x8 Steel Gauge Polished Stainless Mesh Sheet and Steel Strip Manufacturers, Online Inventory of Ss Shim in 1mm-12mm thickness at Best price in India
Today, due to the high demand for customizations, you can find Coloured Stainless Steel Sheet Suppliers who will be able to set your work up with the requirements you have. These suppliers often take the guidance of specifications or standards such as the ASTM to identify, procure and supply Stainless Steel Plates Wholesale. One such specification is ASTM A240 which is intended for chromium, chromium-manganese-nickel and even chromium-nickel alloyed Stainless Steel Sheet Stock. The specification makes room for the determination of the chemical composition and conformance of the mechanical properties for the given Stainless Steel Sheet ASTM A240. Aside from color, finishing, and using specifications, some suppliers also procure design sheets for architecture applications. The design on the 2b Finish Ss Sheet could be given either by the buyer or the design could be any generic pattern that suits the end requirement.
Table of Content
Stainless Steel Plate Specification
1.2mm thickness decorative mirror 2B sandblasted stainless steel sheet
ASME SA240 2B stainless steel plate 1mm 2mm 4mm 6mm thick
SS colored stain finish sheet Hairline brushed stainless steel color sheet
Cold Rolled 430 Stainless Steel Shim Sheet with 2b/Ba Finish
Inox 1.5mm Thick Stainless Steel Cold Rolled Plate
Stainless Steel Strip
Stainless Steel Coil
ASME SA240 Stainless Steel Foil
1.5 mm steel sheet 2mm thick stainless steel plate
NO.1 2B BA Hairline Embossed Finished Stainless Steel Plate
500mm x 500mm x 2mm Stainless Steel Sheet
thickness 3mm stainless steel sheet no. 4 satin finish
6 to 14mm thickness hot rolled stainless steel plate
2b finish stainless steel plate 2mm
inox 4x8 cold and hot roll stainless steel diamond plates
Types Of Stainless Steel Strip
| Size (in inches) | Size (in mm) |
|---|---|
| .125 | 3.18 |
| .134 | 3.40 |
| .156 | 3.96 |
| .187 | 4.75 |
| .250 | 6.35 |
| .312 | 7.92 |
| .375 | 9.53 |
| .500 | 12.7 |
| .600 | 15.9 |
| .750 | 19.1 |
| .875 | 22.2 |
| 1 | 25.4 |
| 1.125 | 28.6 |
| 1.250 | 31.8 |
| 1.500 | 38.1 |
| 1.750 | 44.5 |
| 2 | 50.8 |
| 2.500 | 63.5 |
| 3 | 76.2 |
Stainless Steel Rings Wholesale Price India, Manufacturer of 22 Gauge Mirror Finish Diamond & Checker Plate Specification
Stainless Steel Coil Sizes
| Specifications | ASTM A240 / ASME SA240 |
| Item | Stainless Steel Plates (Hot rolled, cold rolled) |
| Standard | JIS, AISI, ASTM, GB, DIN, EN, etc |
| Surface | the surface and finish of ss Plates: 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, chequered, embossed, hair line, sand blast, Brush, etching, etc |
| Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Thickness | 0.3~10.0mm |
| Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange) |
| End | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Grade | ASTM /ASME SA 240 gr. Tp 304 , 304l, 304h, 309s, 309h, 310s, 310h, 316, 316l, 316h, 316, 317l ,321, 321h, 347, 347 h, 409, 410s, 420, 430, 904l chequered Plate |
SS Sheet Equivalent Grade
| JIS G4304 | ASTM | UNS | KS | EN10095 | AS | CNS |
| SUS201 | 201 | S20100 | STS201 | 1.4372 | 201-2 | 201 |
| SUS202 | 202 | S20200 | STS202 | 1.4373 | – | 202 |
| SUS301 | 301 | S30100 | STS301 | 1.4319 | 301 | 301 |
| SUS304 | 304 | S30400 | STS304 | 1.4301 | 304 | 304 |
| SUS304L | 304L | S30403 | STS304L | 1.4306 | 304L | 304L |
| SUS304N1 | 304N | S30451 | STS304N1 | 1.4315 | 304N1 | 304N1 |
| SUS304N2 | XM21 | S30452 | STS304N2 | – | 304N2 | 304N2 |
| SUS304LN | 304LN | S30453 | STS304LN | – | 304LN | 304LN |
| SUS305 | 305 | S30500 | STS305 | 1.4303 | 305 | 305 |
| SUS309S | 309S | S30908 | STS309S | 1.4833 | 309S | 309S |
| SUS310S | 310S | S31008 | STS310S | 1.4845 | 310S | 310S |
| SUS316 | 316 | S31600 | STS316 | 1.4401 | 316 | 316 |
| SUS316Ti | 316Ti | S31635 | – | 1.4571 | 316Ti | 316Ti |
| SUS316L | 316L | S31603 | STS316L | 1.4404 | 316L | 316L |
| SUS316N | 316N | S31651 | STS316N | – | 316N | 316N |
| SUS316LN | 316LN | S31653 | STS316LN | 1.4429 | 316LN | 316LN |
| SUS316J1 | – | – | STS316J1 | – | 316J1 | 316J1 |
| SUS316J1L | – | – | STS316J1L | – | – | 316J1L |
| SUS317 | 317 | S31700 | STS317 | – | 317 | 317 |
| SUS317L | 317L | S31703 | STS317L | 1.4438 | 317L | 317L |
| SUS321 | 321 | S32100 | STS321 | 1.4541 | 321 | 321 |
| SUS347 | 347 | S34700 | STS347 | 1.455 | 347 | 347 |
| SUS329J1 | 329 | S32900 | STS329J1 | 1.4477 | 329J1 | 329J1 |
| SUS329J3L | – | S31803 | STS329J3L | 1.4462 | 329J3L | 329J3L |
| SUS405 | 405 | S40500 | STS405 | 1.4002 | 405 | 405 |
| SUH409 | 409 | S40900 | STS409 | 1.4512 | 409L | 409L |
| SUS410L | – | – | STS410L | – | 410L | 410L |
| SUS430 | 430 | S43000 | STS430 | 1.4016 | 430 | 430 |
| SUS434 | 434 | S43400 | STS434 | 1.4113 | 434 | 434 |
| – | – | S43940 | – | 1.4509 | 439 | 439 |
| SUS444 | 444 | S44400 | STS444 | 1.4521 | 444 | 444 |
| SUS403 | 403 | S40300 | STS403 | – | 403 | 403 |
| SUS410 | 410 | S41000 | STS410 | 1.4006 | 410 | 410 |
| SUS420J1 | 420 | S42000 | STS420J1 | 1.4021 | 420 | 420J1 |
| SUS420J2 | – | – | STS420J2 | 1.4028 | 420J2 | 420J2 |
| SUS440A | 440A | S44002 | STS440A | – | 440A | 440A |
View 3mm Black Stainless Steel Sheet Metal Fabrication Thickness, SS Sheet Weight, 16 Gauge Stainless Steel Roofing Sheets
Weight Chart Of Sa240 Material
| Thickness Chart in Inches | Plate Weight per Unit Area | Density |
|---|---|---|
| 3/16 | 0.06000 lbs/in²42.184176 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1/4 | 0.08 lbs/in²56.245568 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3/8 | 0.121 lbs/in²85.0714216 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1/2 | 0.161 lbs/in²113.1942056 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 5/8 | 0.196 lbs/in²137.8016416 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3/4 | 0.235 lbs/in²165.221356 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 7/8 | 0.274 lbs/in²192.6410704 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 | 0.313 lbs/in²220.0607848 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 1/4 | 0.391 lbs/in²274.9002136 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 1/2 | 0.47 lbs/in²330.442712 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 3/4 | 0.549 lbs/in²385.9852104 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 | 0.627 lbs/in²440.8246392 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 1/4 | 0.705 lbs/in²495.664068 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 1/2 | 0.784 lbs/in²551.2065664 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 3/4 | 0.862 lbs/in²606.0459952 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3 | 0.941 lbs/in²661.5884936 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
Stainless Steel Trim Strips Meting Point
| CTE, linear 20°C | 17.3 µm/m-°C | 9.61 µin/in-°F | from from 0-100°C |
| CTE, linear 250°C | 17.8 µm/m-°C | 9.89 µin/in-°F | at 0-315°C (32-600°F) |
| CTE, linear 500°C | 18.7 µm/m-°C | 10.4 µin/in-°F | at 0-650°C |
| Specific Heat Capacity | 0.5 J/g-°C | 0.12 BTU/lb-°F | from 0-100°C (32-212°F) |
| Thermal Conductivity | 16.2 W/m-K | 112 BTU-in/hr-ft²-°F | at 0-100°C, 21.5 W/m°C at 500°C |
| Melting Point | 1400 - 1455 °C | 2550 - 2650 °F | |
| Solidus | 1400 °C | 2550 °F | |
| Liquidus | 1455 °C | 2650 °F |
Dimension Chart Of Coloured Stainless Steel Sheet
| Plate Surface finish | Thickness (mm) | Width (max mm) |
|---|---|---|
| 2B – Cold rolled, heat treated, pickled, skin passed Sheet | 0.25–8.0 | 2032 |
| 2D – Cold rolled, heat treated, pickled Sheet | 0.4–6.35 | 1524 |
| 2E – Cold rolled, heat treated, mechanically descaled plate | 0.4–8.0 | 2032 |
| 2R – Cold rolled, bright annealed plate | 0.25–3.5 | 1524 |
| 2H – Work hardened plate | 0.4–6.35 | 1524 |
| Polished, brushed plate | 0.5–4.0 | 1524 |
SA240 SS Coil Imperial Dimensions
| Plate Surface finish | Gauge (in) | Width (max in) |
|---|---|---|
| 2B – Cold rolled, heat treated, pickled, skin passed Plate | 10–24 | 72* |
| 2D – Cold rolled, heat treated, pickled plate | 12–24 | 60 |
| BA Mexinox only | 18–28 | 48 |
| Polished Sheet (not brushed) | 11–24 | 60 |
| Temper rolled Sheet Mexinox only | 13–29 | 48 |
Sa240 Steel Plate Temperature Range
| Grade | Intermittent service temperature | Continuous service temperature |
| 304 | 1600°F | 1700°F |
| (870°C) | (925°C) | |
| 316 | 1600°F | 1700°F |
| (870°C) | (925°C) | |
| 309 | 1800°F | 2000°F |
| (980°C) | (1095°C) | |
| 310 | 1900°F | 2100°F |
| (1035°C) | (1150°C) | |
| 410 | 1500°F | 1300°F |
| (815°C) | (705°C) | |
| 420 | 1350°F | 1150°F |
| (735°C) | (620°C) | |
| 430 | 1600°F | 1500°F |
Mechanical Structure Of Stainless Steel Sheet
| Type | Mechanical Properties for Stainless Steel Plates | |||||||
| ASTM(A240M) | Others(JIS) | Tensile Properties | Hardness | |||||
| Yield Strength (Mpa) | Tensile Strength (Mpa) | Elongation (%) | HBW | HRBW | ||||
| AusteniticSteels | 304 | SUS304 | ≥205 | ≥515 | ≥40 | ≤201 | ≤92 | |
| 304H | ≥205 | ≥515 | ≥40 | ≤201 | ≤92 | |||
| 304L | SUS304L | ≥170 | ≥485 | ≥40 | ≤201 | ≤92 | ||
| 304N | SUS304N1 | ≥240 | ≥550 | ≥30 | ≤217 | ≤95 | ||
| 304LN | SUS304LN | ≥205 | ≥515 | ≥40 | ≤217 | ≤95 | ||
| 309S | SUS309S | ≥205 | ≥515 | ≥40 | ≤217 | ≤95 | ||
| 310S | SUS310S | ≥205 | ≥515 | ≥40 | ≤217 | ≤95 | ||
| 316 | SUS316 | ≥205 | ≥515 | ≥40 | ≤217 | ≤95 | ||
| 316L | SUS316L | ≥170 | ≥485 | ≥40 | ≤217 | ≤95 | ||
| 316H | ≥205 | ≥515 | ≥40 | ≤217 | ≤95 | |||
| 316LN | SUS316LN | ≥205 | ≥515 | ≥40 | ≤217 | ≤95 | ||
| 317L | SUS317L | ≥205 | ≥515 | ≥40 | ≤217 | ≤95 | ||
| 317LN | SUS317LN | ≥240 | ≥550 | ≥40 | ≤217 | ≤95 | ||
| 321 | SUS321 | ≥205 | ≥515 | ≥40 | ≤217 | ≤95 | ||
| 347 | SUS347 | ≥205 | ≥515 | ≥40 | ≤201 | ≤92 | ||
| N08904/904L | SUS890L | ≥220 | ≥490 | ≥35 | ≤196 | ≤90 | ||
| S31254 | ≥310 | ≥655 | ≥35 | ≤223 | ≤96 | |||
| SUS317J2 | ≥345 | ≥690 | ≥40 | ≤250 | ≤100 | |||
Hot selling Ss Plate, Stainless Steel Coil Tubing Heat Exchanger, 1 inch Stainless Steel Flat Shim Stock Strips Price List
Stainless Steel Sheet Price
| Price of Stainless Steel sheet | SS Sheet Price in UAE Dirham |
|---|---|
|
Hot And /Or Cold Rolled Stainless Steel Sheet And/or Plates 25mm X1000mm X 2.000- En 1.4307/1d/Trim Edge |
6.45 UAE Dirham |
|
Cr Stainless Steel Sheet 0.7mmx1219mmx2438mm |
10.25 UAE Dirham |
|
Hr stainless Steel Sheet 6mmx1219mmx2438mm |
9.37 UAE Dirham |
Chemical Properties Of Stainless Steel Checker Plate
| Type | Grade | ASTM A240 Chemical Composition | |||||||||
| ASTM(A240M) | Others(JIS) | C | Si | Mn | P | S | Ni | Cr | Mo | Others | |
| Austenitic Steels | 304 | SUS304 | 0.07 | 0.75 | 2.00 | 0.045 | 0.030 | 8.0/10.5 | 17.5/19.5 | ― | N0.10 |
| 304H | 0.04/0.10 | 0.75 | 2.00 | 0.045 | 0.030 | 8.0/10.5 | 18.0/20.0 | ― | |||
| 304L | SUS304L | 0.030 | 0.75 | 2.00 | 0.045 | 0.030 | 8.0/12.0 | 17.5/19.5 | ― | N0.10 | |
| Stainless Steel 304N | SUS304N1 | 0.08 | 0.75 | 2.00 | 0.045 | 0.030 | 8.0/10.5 | 18.0/20.0 | ― | N:0.10/0.16 | |
| Stainless Steel 304LN | SUS304LN | 0.030 | 0.75 | 2.00 | 0.045 | 0.030 | 8.0/12.0 | 18.0/20.0 | ― | N:0.10/0.16 | |
| Stainless Steel 309S | SUS309S | 0.08 | 0.75 | 2.00 | 0.045 | 0.030 | 12.0/15.0 | 22.0/24.0 | ― | ||
| 310S | SUS310S | 0.08 | 1.50 | 2.00 | 0.045 | 0.030 | 19.0/22.0 | 24.0/26.0 | ― | ||
| 316 | SUS316 | 0.08 | 0.75 | 2.00 | 0.045 | 0.030 | 10.0/14.0 | 16.0/18.0 | 2.00/3.00 | N0.10 | |
| 316L | SUS316L | 0.030 | 0.75 | 2.00 | 0.045 | 0.030 | 10.0/14.0 | 16.0/18.0 | 2.00/3.00 | N0.10 | |
| Stainless Steel 316H | 0.04/0.10 | 0.75 | 2.00 | 0.045 | 0.030 | 10.0/14.0 | 16.0/18.0 | 2.00/3.00 | |||
| Stainless Steel 316LN | SUS316LN | 0.030 | 0.75 | 2.00 | 0.045 | 0.030 | 10.0/14.0 | 16.0/18.0 | 2.00/3.00 | N:0.10/0.16 | |
| 317L | SUS317L | 0.030 | 0.75 | 2.00 | 0.045 | 0.030 | 11.0/15.0 | 18.0/20.0 | 3.0/4.0 | N0.10 | |
| Stainless Steel 317LN | SUS317LN | 0.030 | 0.75 | 2.00 | 0.045 | 0.030 | 11.0/15.0 | 18.0/20.0 | 3.0/4.0 | N:0.10/0.22 | |
| 321 | SUS321 | 0.08 | 0.75 | 2.00 | 0.045 | 0.030 | 9.0/12.0 | 17.0/19.0 | ― | N0.10Ti:5ʷʢC+Nʣ/0.70 | |
| 347 | SUS347 | 0.08 | 0.75 | 2.00 | 0.045 | 0.030 | 9.0/13.0 | 17.0/19.0 | ― | Nb:10ʷC/1.00 | |
| Stainless Steel 904L | SUS890L | 0.020 | 1.00 | 2.00 | 0.045 | 0.035 | 23.0/28.0 | 19.0/23.0 | 4.00/5.00 | N0.10Cu:1.0/2.0 | |
| S31254 | 0.020 | 0.80 | 1.00 | 0.030 | 0.010 | 17.5/18.5 | 19.5/20.5 | 6.0/6.5 | N:0.18/0.25Cu:0.50/1.00 | ||
| SUS317J2 | 0.06 | 1.50 | 2.00 | 0.045 | 0.030 | 12.00/16.00 | 23.00/26.00 | 0.50/1.20 | N:0.25/0.40 | ||
We Have 25 years of Experience as a supplier of Below Products Worldwide
| cold rolled 0.2mm thick stainless steel sheet | Hong Kong, Malaysia, Oman, UAE |
| Stainless Steel Plate 2B BA Finished | Iran, Italy, Chile, Singapore |
| 4x8 stainless steel sheet | Norway, Turkey, United Arab Emirates (UAE), Malaysia |
| 1.5mm stainless steel sheet 2b finish | Russia, Malaysia, Netherlands, Dubai |
| Stainless Steel Plate 1500 x 6000mm | Mexico, Spain, Egypt, UK |
| 18 Gauge Stainless Steel Sheet | Malaysia, Europe, United Kingdom -UK, UAE |
| Decorative Stainless Steel Sheets | Poland, Canada, UK, Ellington -United States |
| 3mm stainless steel plate | Philippines, Indonesia, Dammam -KSA, Belgium |
| Food grade cold rolled stainless steel sheet | Europe, France, Qatar, Thailand |
| Stainless Steel Plate | Thailand, Germany, Czechia, Malaysia |
| Grade 2B Finish Cold Rolled Stainless Steel Coil | Bangladesh, USA, Malaysia, Finland |
| Polished Stainless Steel Sheet | Malaysia, Colombia, Sweden, China |
| 24 Gauge Stainless Steel Sheet | Los Alamos -Mexico, Taiwan, Malaysia, Philippines |
| Stainless Steel Mesh Sheet | NY 12203 (USA), South Korea, Singapore, Malaysia |
| Hot Rolled Ss Sheet | Kuwait, Saudi Arabia (KSA), South Africa, Brazil |
| 33cm stainless steel plate | Singapore, South Africa, Bahrain, Singapore |
| 0.5 Mm Stainless Steel Sheet | UK, Australia, Philippines, Nigeria |
| Stainless Steel Strip 1mm | Canada, Malaysia, Philippines, Singapore |
| Thin Stainless Steel Sheets | Romania, Japan, Europe, Malaysia |