ASME B36.19 Stainless Steel Pipe and Tube Manufacturer In India
Most stainless steel alloys offer corrosion resistance. Though the quality of corrosion resistance is dependent entirely on the quality used. The most common Stainless Steel Seamless Pipe belongs to the austenitic category of steel, which houses grades such as alloy 304 or marine grade i.e. 316. Under specification ASTM A312, the alloys include austenitic grades with either seamless or welded construction. The strength of a Stainless Steel Seamless Tube is considered to be higher because it can top up about 20% more pressure as compared to a welded austenitic steel. Seamless pipes are extruded from billets.
Stainless Steel Seamless Pipe
ASME B36.19 Stainless Steel Pipe
Stainless Steel Square Tube
Check Weight Chart of ASTM A312 SS Schedule 40 Pipe, PED Approved Stainless Steel Tube Suppliers in India
Many Stainless Steel Tube Manufacturers explain that the cost of producing a seamless pipe is more because the process is longer and more intensive, unlike that of a welded pipe. Arguably, the price of a welded pipe according to ASME B36.19 Stainless Steel Pipe Manufacturer would be lesser because the process is a much simpler one with a sheet being welded to form a pipe. The furnishing of ASTM A312 Stainless Steel Schedule 10 Pipe is required to be with the use of an appropriate heat treatment followed by subsequent cooling and testing procedures. The chemical composition of each grade produced by this specification must meet the requirements that have been prescribed. The specification calls for testing specimens of the ANSI B36.19 Stainless Steel Schedule 40 Pipe with tests like a transverse or longitudinal tension test,weld decay, tensile and yield strength, non-destructive tests (either anelectric test or a hydrostatic test) as well as a flattening test.
Table of Content
Schedule 40 Stainless Steel Pipe Specifications
| Range in NB: | 6 to 1200 NB |
| Outer Dia in Inch : | 1/8 Inch NPS to 12 Inch NPS |
| Thickness in MM: | 0.6 to 12.7 Milimeter |
| Schedules Chart: | SCHEDULES 5, 10, 20, 30, 40, 60, 80, 100, 120, 140, 160, XXS. |
| Length Chart: | Double, Single Random & Cut Length |
| ASTM Specification: | ASTM A312 - ASME SA312 |
| Types of Pipes: | Round, Rectangle, Square, Honed Tubes, Hydraulic |
| End : | Beveled and Plain End |
| Stainless Steel Pipe Suppliers in India | |||
| SS Products | Dimension Chart | International Standard Chart | Steel Grade and Code |
| Seamless Austenitic SS Tubing for General Service | OD: 6.0~50.8Milimeter WT: 0.8~10.0Milimeter |
ASTM A269, ASME SA269 | TP304, TP304L, TP304H, TP310, TP310S, TP316, TP316L, TP316Ti, TP317, TP317L, TP321, TP321H, TP347, TP347H |
| Seamless Austenitic SS Pipes | OD: 1/4inch~20inch WT: SCH5S~SCH80S |
ASTM A312/A312M, ASME SA312/SA312M | TP304, TP304L, TP304H, TP310, TP310S, TP316, TP316L, TP316Ti, TP317, TP317L, TP321, TP321H, TP347, TP347H |
| Seamless Austenitic AS Boiler, Super Heater and Heat-Exchanger Tubes | OD: 6.0~50.8Milimeter WT: 0.8~10.0Milimeter |
ASTM A213/A213M, ASME SA213/SA213M | TP304, TP304L, TP304H, TP310, TP310S, TP316, TP316L, TP316Ti, TP317, TP317L, TP321, TP321H, TP347, TP347H |
| Seamless SS Mechanical Tubing | OD: 6.0~50.8Milimeter WT: 1.8~10.0Milimeter |
ASTM A511 | MT304, MT304L, MT304H, MT310, MT310S, MT316, MT316L, MT317, MT317L, MT321, MT321H, MT347 |
| Seamless Duplex SS Tubing for General Service | OD: 19.0~60.5Milimeter WT: 1.2~5.0Milimeter |
ASTM A789 / A789M | S31803, S32205, S32750 |
| Seamless Duplex SS Pipes | OD: 3/4inch~10inch WT: SCH5S~SCH80S |
ASTM A790 / A790M | S31803, S32205, S32750 |
| Seamless Stainless Tubes for Pressure Purposes | OD: 6.0~530.0Milimeter WT: 0.8~34.0Milimeter |
EN 10216, DIN 17456, 17458 | 1.4301, 1.4307, 1.4541, 1.4401, 1.4404, 1.4571, 1.4878, 1.4432, 1.4462 |
Types Of SS Smls Pipe
Ss Seamless Stainless Steel Pipe Cold Drawing
ASTM312 Hot/Cold Rolled Seamless Stainless Steel Pipe Tube
ASTM312 ASTM213 Cold Rolled Stainless Steel Seamless Pipe
ANSI B36.19 Seamless Round Stainless Steel Pipes
Stainless Steel Round Seamless Tube Pipe
Stainless steel pipes seamless SIZE 4" tube 12M long Pipe
4 inch Stainless Steel Square Pipe
Size 3 Inch Stainless Seamless 4 Sch 40 Steel Pipe
Stainless Steel Schedule 40 Pipe
1/2" Bright Annealed Seamless Stainless Steel Pipe
SS Round Pipe 10 inch
Stainless Steel Seamless Heat Exchanger Tubes size 19.05x2.77x4454mm
ASME B36.19 SS Oval Pipe
SS Rectangular Pipe
Stainless Steel Schedule 10 Pipe
See Stainless Steel Square Pipe Diameter and Check SS Round and oval Pipes Properties.
Schedule 40 Stainless Steel Pipe Diameter
| Product Description | Outside Diamter, OD (in mm) | Wall Thickness, WT (in mm) | |
| Stainless Steel Round Pipe/Tubes | 6 – 630mm | 0.5-30mm | |
| SS Square Pipe/Tube | 12.7* 12.7mm to 300* 300mm | 0.5-30mm | |
| Stainless Steel Rectangular Pipe/Tube | 10*20mm to 100*200mm | 0.5-30mm | |
| SS Colour Coated Pipe/Tube | 6 to 630mm | 0.5-30mm | |
| Stainless Steel Ornamental Tubes | 12.7 to 76.2mm | 0.5-2.0mm | |
| SS Electropolished Pipes/Tubes | 12.7 to 250mm | 0.5-30mm | |
| SS Slot Round Pipe/Tube | 12.7 to 76.2mm | 0.5-2.0mm | |
| SS Triangle Tube | 16 to 85mm | 0.5-3.0mm | |
| Stainless Steel Hexagonal Tube | 13 to 85mm | 0.5-2.0mm | |
| SS Handrail Tube | – | 0.5-2.0mm | |
| SS U Shaped Tube | 20 to 200mm | 0.5-2.0mm | |
| Thin-Wall Stainless Steel Tube | 22*0.7mm to 108*2.0mm | 0.5-2.0mm | |
| Inner/Outside Polished SS Tube, Pipes | 12.5 to 203.2mm | 1.0 – 5mm | |
| SS Capillary Tube | 0.28 to 10mm | 0.08 – 1.2mm | |
| SS Seamless Tube | 6 to 430mm | 0.8 – 30mm | |
We are Largest Stainless Steel Pipe Suppliers in Mumbai. Check Our Latest Price List of Stainless Steel Seamless Tube
Stainless Steel Square Pipe Standards
- American : ASME SA269, ASTM A312, ASTM A269, ASTM A213, ASME SA213, ASTM A789, ASTM A511, ASTM A790
- Germany : DIN17456-85, DIN2462.1-1981, DIN17458-85
- Japanese : JIS G3459-2012, JIS G3463-2006
- Russian : GOST 9941-81
- GB : GB14976, GB14975, GB95, GB5310, GB13296, GB/T12771, GB9948
Looking for SS Rectangular Pipe manufacturers in Mumbai? View Mechanical Properties of Stainless Steel Schedule 10 Pipe
Asme B36.19 Stainless Steel Schedule 10 Pipe Mechanical Composition
| Grade Name | N/mm 2 Minimum. Tensile Stress |
N/mm 2 Minimum Proof Stress |
% Minimum Elongation |
HRB Maximum Hardness |
| SUS304 | 520 | 205 | 40 | 90 |
| SUS304L | 480 | 175 | 40 | 90 |
| SUS310S | 520 | 205 | 40 | 90 |
| SUS316L | 480 | 175 | 40 | 90 |
| SUS321 | 520 | 205 | 40 | 90 |
Chemical Properties Of SS Rectangular Pipe
| Grade | UNS # | Content % by weight | |||||||
| Carbon | Manganese | Phosphorus | Sulfur | Silicon | Chromium | Nickel | Molybdenum | ||
| TP304 | S30400 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 18 – 20 | 8 – 11 | x |
| TP304L | S30403 | 0.035 | 2.00 | 0.045 | 0.030 | 1.00 | 18 – 20 | 8 – 13 | x |
| TP316 | S31600 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 16 – 18 | 10 – 14 | 2 – 3 |
| TP316L | S31603 | 0.035 | 2.00 | 0.045 | 0.030 | 1.00 | 16 – 18 | 10 – 14 | 2 – 3 |
Check Size of Stainless Steel Boiler Tube and ASTM A312 SS Seamless Pipes
SS Round Pipe Standard Size
| Stainless Steel smls Pipe Outer Diameter Milimeter |
Pipe Wall Thickness Milimeter |
Inch | Schedule | Kilogram/ Meter |
|---|---|---|---|---|
| 13.72 | 1.65 | 1/4 | 10S | 0.50 |
| 13.72 | 2.24 | 1/4 | 40S | 0.64 |
| 13.72 | 3.02 | 1/4 | 80S | 0.81 |
| 17.15 | 1.65 | 3/8 | 10S | 0.64 |
| 17.15 | 2.31 | 3/8 | 40S | 0.86 |
| 17.15 | 3.20 | 3/8 | 80S | 1.12 |
| 21.34 | 2.11 | 1/2 | 10S | 1.02 |
| 21.34 | 2.77 | 1/2 | 40S | 1.29 |
| 21.34 | 3.73 | 1/2 | 80S | 1.65 |
| 26.67 | 2.11 | 3/4 | 10S | 1.30 |
| 26.67 | 2.87 | 3/4 | 40S | 1.71 |
| 26.67 | 3.91 | 3/4 | 80S | 2.23 |
| 33.40 | 2.77 | 1 | 10S | 2.13 |
| 33.40 | 3.38 | 1 | 40S | 2.54 |
| 33.40 | 4.55 | 1 | 80S | 3.29 |
| 33.40 | 6.352) | 1 | 160 | 4.30 |
| 42.16 | 2.77 | 1¼ | 10S | 2.73 |
| 42.16 | 3.56 | 1¼ | 40S | 3.44 |
| 42.16 | 4.85 | 1¼ | 80S | 4.53 |
| 42.16 | 6.352) | 1¼ | 160 | 5.69 |
| 48.26 | 2.77 | 1½ | 10S | 3.16 |
| 48.26 | 3.68 | 1½ | 40S | 4.11 |
| 48.26 | 5.08 | 1½ | 80S | 5.49 |
| 60.33 | 2.77 | 2 | 10S | 3.99 |
| 60.33 | 3.91 | 2 | 40S | 5.52 |
| 60.33 | 5.54 | 2 | 80S | 7.60 |
| 60.33 | 8.742) | 2 | 160 | 11.29 |
| 73.03 | 3.05 | 2½ | 10S | 5.35 |
| 73.03 | 5.16 | 2½ | 40S | 8.77 |
| 73.03 | 7.01 | 2½ | 80S | 11.59 |
| 88.90 | 3.05 | 3 | 10S | 6.56 |
| 88.90 | 5.49 | 3 | 40S | 11.47 |
| 88.90 | 7.62 | 3 | 80S | 15.51 |
| 88.90 | 11.132) | 3 | 160 | 21.67 |
| 101.60 | 3.05 | 3½ | 10S | 7.53 |
| 101.60 | 5.74 | 3½ | 40S | 13.78 |
| 101.60 | 8.08 | 3½ | 80S | 18.92 |
| 114.30 | 3.05 | 4 | 10S | 8.50 |
| 114.30 | 6.02 | 4 | 40S | 16.32 |
| 114.30 | 8.56 | 4 | 80S | 22.67 |
| 114.30 | 13.492) | 4 | 160 | 34.05 |
| 141.30 | 6.55 | 5 | 40S | 22.10 |
| 141.30 | 9.53 | 5 | 80S | 31.44 |
| 141.30 | 15.882) | 5 | 160 | 49.87 |
| 168.28 | 3.4 | 6 | 10S | 14.04 |
| 168.28 | 7.11 | 6 | 40S | 28.69 |
| 168.28 | 10.97 | 6 | 80S | 43.21 |
| 168.28 | 14.27 | 6 | 120 | 54.75 |
| 168.28 | 18.262) | 6 | 160 | 68.59 |
| 219.08 | 8.18 | 8 | 40S | 43.20 |
| 219.08 | 12.7 | 8 | 80S | 65.63 |
| 219.08 | 18.23 | 8 | 120 | 91.30 |
| 219.08 | 23.012) | 8 | 160 | 112.97 |
Stainless Steel Tube Sizes Chart In Mm
| Wall Thickness Chart | SS smls Tube Size Chart (outer Dia) |
|---|---|
| .010 | 1/16" , 1/8" , 3/16" |
| .020 | 1/16" , 1/8" , 3/16" , 1/4" , 5/16" , 3/8" |
| .012 | 1/8" |
| .016 | 1/8" , 3/16" |
| .028 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 3/4" , 1" , 1 1/2" , 2" |
| .035 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 7/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
| .049 | 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/8" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
| .065 | 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 3/4" , 2" , 2 1/2" , 3" |
| .083 | 1/4" , 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 7/8" , 2" , 2 1/2" ,3" |
| .095 | 1/2" , 5/8" , 1" , 1 1/4" , 1 1/2" , 2" |
| .109 | 1/2" , 3/4" , 1" , 1 1/4" , 1 1/2" , 2" |
| .120 | 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 2" , 2 1/4" , 2 1/2" , 3" |
| .125 | 3/4" , 1" , 1 1/4" , 1 1/2" , 2" , 3" , 3 1/4" |
| .375 | 3 1/2" |
Application Of Ansi B36.19 Stainless Steel Pipe
- Chemical and petrochemical
- Power generation
- Renewable energy
- Pulp and Paper
- Process piping
- Pharmaceutical
- Food and beverage
- Oil and gas
- Mining
- Water/waste
- Marine
Seamless SS Tubing Tolerances
| NPS Designator | Permissible Variations in Outside Diameter | |
|---|---|---|
| Over In. | Under In. | |
| 1/8 to 1-1/2, incl | 1/64 (0.015) | 1/32 (0.031) |
| Over 1-1/2 to 4, incl | 1/32 (0.031) | 1/32 (0.031) |
| Over 4 to 8, incl | 1/16 (0.062) | 1/32 (0.031) |
| Over 8 to 18, incl | 3/23 (0.093) | 1/32 (0.031) |
Grades Chart Of SS Pipe
- 304/304L
- 316/316L
- 304H
- 316H
- 309
- 310S
- 317L
- 321/321H
- 347/347H
- 904L
- DUPLEX 2205 / SUPER DUPLEX 2507
SS Seamless Pipe Thickness Chart
| Outside Diameter | Wall Thickness | ||
|---|---|---|---|
| Class | Tolerance | Class | Tolerance |
| D1 | ±1.5%, Or ±0.75 Mm Min. | T1 | ±15%, Or ±0.6 Mm Min. |
| D2 | ±1.0%, Or ±0.5 Mm Min. | T2 | ±12.5%, Or ±0.4 Mm Min. |
| D3 | ±0.75%, Or. ±0.3 Mm Min. | T3 | ±10%, Or ±0.2 Mm Min. |
| D4 | ±0.50%, Or ±0.1 Mm Min. | T4 | ±7.5%, Or ±0.15 Mm Min. |
| T5 | +/- 5.0 %, Or +/- 0.10 Mm Min. | ||
| Standard | Manufacturing & Delivery Condition | Outside Diameter OD / Mm |
OD Tolerance Mm | Thickness T / Mm |
T Tolerance Mm | |
|---|---|---|---|---|---|---|
| Minimum | Average | |||||
| ASTM A1016 A1016M |
Hot Drawn Seamless Tubes | <=100 | +0.4, -0.8 | <=2.4 | +0.4t, 0 | |
| 100 – 200 | +0.4, -1.2 | 2.4 – 3.8 | +0.35t, 0 | |||
| 200 – 225 | +0.4, -1.6 | 3.8 – 4.6 | +0.33t, 0 | |||
| >=4.6 | +0.28t, 0 | |||||
| Cold Drawn Seamless Tubes | <25 | +0.1, -0.11 | +0.20t, 0 | +/-0.10t | ||
| 25 – 40 | ||||||
| 40 – 50 | +/-0.2 | +0.22t, 0 | +/-0.10t | |||
| 50 – 65 | +/-0.25 | |||||
| 65 – 75 | +/-0.3 | |||||
| 75 – 100 | +/-0.38 | |||||
| 100 – 200 | +/-0.38, -0.04 | |||||
| 200 – 250 | +/-0.38, -1.14 | |||||
| Welded Tubes | 40 – 50 | +/-0.2 | +0.18t, 0 | +/-0.10t | ||
| 50 – 65 | +/-0.25 | |||||
| 65 – 75 | +/-0.3 | |||||
| 75 – 100 | +/-0.38 | |||||
| 100 – 200 | +/-0.38, -0.04 | |||||
| 200 – 250 | +/-0.38, -1.14 | |||||
| ASTM A999 / M | Seamless Tubes And Welded Tubes | <48.3 | +0.4, -0.8 | -0.125t | ||
| ASTM A312 / M | Seamless Tubes And Welded Tubes | 48.3-114.3 | +/-0.8 | OD=10.3-73 | +0.20 T, -125t | |
| 168.3-219.1 | +1.6, -0.8 | T/OD<=5% OD=88.9-457.2 | +0.225 T, -125t | |||
| 219.1-457.2 | +2.4, -0.8 | T/OD>5% OD=88.9-457.2 | +0.15 T, -125t | |||
| Welded Tubes | 508-660 | +3.2, -0.8 | OD>=508 | +0.175 T，-0.125 T | ||
| 711-864 | +4.0, -0.8 | T/OD<=5%, OD>=508 | +0.225 T，-0.125 T | |||
| Seamless Tubes | 914-1209 | +4.8, -0.8 | T/OD>5%, OD>=508 | +0.15 T, -125t | ||
| ASTM A409 / M | Welded Tubes | +/-0.2% | T<4.8 | |||
| +/-0.4% | T>=4.8 | |||||
| ASTM A358 / M | Welded Tubes | +/-0.50% | ||||
| ASTM A511 | Seamless Tubing | <=12.7 | +/-0.1 | +/-0.15t | ||
| 12.7-38.1 | +/-0.2 | +/-0.10t | ||||
| 38.1-88.9 | +/-0.3 | |||||
| 88.9-139.7 | +/-0.4 | |||||
| 139.7-203.1 | +/-0.8 | |||||
| 203.1-220 | +/-1.1 | |||||
| 220-325 | +/-1.6 | |||||
Stainless Steel Pipe & Tube ASTM Standards
Stainless Steel Tube ASTM Specification
| ASTM Standard | Description |
| ASTM A213/A213M | Seamless ferritic and austenitic alloy steel boiler, superheater and heat exchanger tubes. |
| ASTM A249/A249M | Welded austenitic steel boiler, superheater, heat exchanger and condenser tubes. |
| ASTM A269 | Seamless and welded austenitic stainless steel tubing for general purposes. |
| ASTM A270 | Seamless and welded austenitic stainless steel sanitary tubing. |
| ASTM A450/A450M | General requirements for carbon, ferritic alloy and austenitic alloy steel tubes. |
| ASTM A554 | Welded stainless steel mechanical tubing. |
| ASTM A791/A791M | Welded unannealed ferritic stainless steel tubing. |
| ASTM A789/A789M | Seamless and welded ferritic/austenitic stainless steel tubing for general service. |
| AS1163 | Structural steel hollow sections (dimensional tolerances). |
| AS1528, Parts 1 to 4 | Tubes (stainless steel) and tube fittings for the food industry. |
| Higher austenitic | |
| ASTM B674 | UNS N08904 welded tube. |
| ASTM B677 | UNS N08904 seamless pipe and tube. |
Stainless Steel Pipe ASTM Standards
| ASTM Standards | Description |
| ASTM A312/A312M | Seamless and welded austenitic stainless steel pipe. |
| ASTM A358/A358M | Electric-Fusion-Welded (EFW) austenitic chromium-nickel alloy steel pipe for high temperature service. |
| ASTM A409/A409M | Welded large diameter austenitic steel pipe for corrosive or high temperature service. |
| ASTM A731/A731M | Seamless and welded ferritic and martensitic stainless steel pipe. |
| ASTM A790/A790M | Seamless and welded ferritic/austenitic stainless steel pipe. |
| ASTM A450/A450M | General requirements for carbon, ferritic alloy and austenitic alloy steel tubes. |
| ASTM A530/A530M | General requirements for specialised carbon and alloy steel pipe. |
| JIS G3459 | Stainless steel pipes. |
| ANSI/ASME B36.10M | Welded and seamless wrought steel pipe. |
| ANSI/ASME B36.19M | Stainless steel pipe. |
| Higher austenitic | |
| ASTM A673 | UNS N08904 welded pipe. |
| ASTM A677 | UNS N08904 seamless pipe and tube. |
Stainless Steel Pipe Vs Carbon Steel Pipe
SS pipes has a high chromium content that forms an invisible layer on the prevent corrosion and staining. CS pipes has a higher carbon content, which gives the lower melting point, more malleability and durability, and better heat distribution.
Stainless Steel Seamless Tube Characteristics
- Corrosion resistant.
- High tensile strength.
- Very durable.
- Temperature resistant.
- Easy formability and fabrication.
- Low-maintenance (long lasting)
- Attractive appearance.
- Environmentally friendly (recyclable
SS Oval Pipe Pressure Rating
| (psig) Pressure Rating Chart | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size in (in) |
Schedule Chart | Temp Range (oF) | ||||||||
| 100 | 200 | 300 | 400 | 500 | 600 | 650 | 700 | 750 | ||
| 1" | 40 | 3048 | 2629 | 2362 | 2171 | 2019 | 1924 | 1867 | 1824 | 1810 |
| 80 | 4213 | 3634 | 3265 | 3002 | 2791 | 2659 | 2580 | 2528 | 2501 | |
| 160 | 6140 | 5296 | 4759 | 4375 | 4068 | 3876 | 3761 | 3684 | 3646 | |
| 1 1/2" | 40 | 2257 | 1947 | 1750 | 1608 | 1496 | 1425 | 1383 | 1354 | 1340 |
| 80 | 3182 | 2744 | 2466 | 2267 | 2108 | 2009 | 1949 | 1909 | 1889 | |
| 160 | 4619 | 3984 | 3580 | 3291 | 3060 | 2916 | 2829 | 2772 | 2743 | |
| 2" | 40 | 1902 | 1640 | 1474 | 1355 | 1260 | 1201 | 1165 | 1141 | 1129 |
| 80 | 2747 | 2369 | 2129 | 1957 | 1820 | 1734 | 1682 | 1648 | 1631 | |
| 160 | 4499 | 3880 | 3486 | 3205 | 2980 | 2840 | 2755 | 2699 | 2671 | |
| 3" | 40 | 1806 | 1558 | 1400 | 1287 | 1196 | 1140 | 1106 | 1084 | 1072 |
| 80 | 2553 | 2202 | 1979 | 1819 | 1691 | 1612 | 1564 | 1532 | 1516 | |
| 160 | 3840 | 3312 | 2976 | 2736 | 2544 | 2424 | 2352 | 2304 | 2280 | |
| 4" | 40 | 1531 | 1321 | 1187 | 1091 | 1014 | 967 | 938 | 919 | 909 |
| 80 | 2213 | 1909 | 1715 | 1577 | 1466 | 1397 | 1355 | 1328 | 1314 | |
| 160 | 3601 | 3106 | 2791 | 2566 | 2386 | 2273 | 2206 | 2161 | 2138 | |
| 5" | 40 | 1342 | 1158 | 1040 | 956 | 889 | 847 | 822 | 805 | 797 |
| 80 | 1981 | 1709 | 1535 | 1411 | 1312 | 1250 | 1213 | 1189 | 1176 | |
| 160 | 3414 | 2945 | 2646 | 2433 | 2262 | 2155 | 2091 | 2049 | 2027 | |
| 6" | 40 | 1219 | 1052 | 945 | 869 | 808 | 770 | 747 | 732 | 724 |
| 80 | 1913 | 1650 | 1483 | 1363 | 1267 | 1208 | 1172 | 1148 | 1136 | |
| 160 | 3289 | 2836 | 2549 | 2343 | 2179 | 2076 | 2014 | 1973 | 1953 | |
| 8" | 40 | 1073 | 926 | 832 | 765 | 711 | 678 | 657 | 644 | 637 |
| 80 | 1692 | 1459 | 1311 | 1205 | 1121 | 1068 | 1036 | 1015 | 1005 | |
| 160 | 3175 | 2738 | 2460 | 2262 | 2103 | 2004 | 1944 | 1905 | 1885 | |
| 10" | 40 | 974 | 840 | 755 | 694 | 645 | 615 | 596 | 584 | 578 |
| 80 | 1609 | 1388 | 1247 | 1147 | 1066 | 1016 | 986 | 966 | 956 | |
| 160 | 3147 | 2714 | 2439 | 2242 | 2085 | 1986 | 1927 | 1880 | 1868 | |
Equivalent Grade Of Polished Stainless Steel Pipe
| MATERIAL | ASTM | EQUIVALENT STANDARD | |||
|---|---|---|---|---|---|
| UNS | GRADE (TP) | DIN (EN) | AFNOR (NF) | JAPAN (JIS) | |
| AUSTENTIC SS | S30400 | 304 | 1.4301 | Z6CN18-09 | SUS304 |
| S30403 | 304L | 1.4307 | Z2CN18-10 | SUS304L | |
| S31600 | 316 | 1.4401 | Z6CND17-11 | SUS316 | |
| S31603 | 316L | 1.4404 | Z2CND17-12 | SUS316L | |
| S31635 | 316Ti | 1.4571 | Z2CND17-12 | - | |
| S32100 | 321 | 1.4541 | Z6CNT18-10 | SUS321 | |
| S34700 | 347 | 1.455 | Z6CNNb18-10 | SUS347 | |
| S30409 | 304H | 1.4948 | Z6CN19-10 | SUS304H | |
| S31609 | 316H | 1.4919 | Z6CND17-12 | SUS316H | |
| S32109 | 321H | 1.4941 | Z10CND18-10 | SUS321H | |
| S31000 | 310 | - | - | SUS310 | |
| S31703 | 317L | 1.4438 | - | SUS317L | |
| FERRITIC SS | S40500 | 405 | 1.4002 | Z6CAL13 | SUS405 |
| S41000 | 410 | 1.4006 | Z12C13 | SUS410 | |
| S43000 | 430 | 1.4016 | Z10C17 | SUS430 | |
| DUPLEX SS | S32205 | 2205 | 1.4462 | Z2CND22-06 | - |
| S31803 | - | 1.4462 | Z2CND22-05 | - | |
SS Seamless Tube Price
| Price of Stainless Steel Pipe | SS Pipe Price in UAE Dirham |
|---|---|
|
Stainless Steel Seamless Pipe Astm/Asme A/Sa-312 |
12.19 UAE Dirham |
| SS Seamless Tubes/Pipes (Cold Finished) | 10.80 UAE Dirham |
|
Stainless Steel Round Pipe |
10.09 UAE Dirham |
SS Square Tube Weight Chart
| NPS in Inches | Outside Diameter Chart | Wall Thickness Chart | Weight Chart in kg/Mtr | Weight Chart in Lb/ft | |||
| Inches | Milimeter | Inches | Milimeter | Schedule | kg/Mtr | Lb/ft | |
| 1/2″ | 0.840 | 21 | 0.109 | 2.769 | 40 STD | 1.268 | 0.851 |
| 0.147 | 3.734 | 80 STD | 1.621 | 1.088 | |||
| 3/4″ | 1.050 | 27 | 0.113 | 2.870 | 40 STD | 1.684 | 1.131 |
| 0.154 | 3.912 | 80 STD | 2.195 | 1.474 | |||
| 1″ | 1.315 | 33 | 0.133 | 3.378 | 40 STD | 2.501 | 1.679 |
| 0.179 | 4.547 | 80 STD | 3.325 | 2.172 | |||
| 1 1/4″ | 1.660 | 42 | 0.140 | 3.556 | 40 STD | 3.385 | 2.273 |
| 0.191 | 4.851 | 80 STD | 4.464 | 2.997 | |||
| 1 1/2″ | 1.900 | 48 | 0.145 | 3.683 | 40 STD | 4.048 | 2.718 |
| 0.200 | 5.080 | 80 STD | 5.409 | 3.361 | |||
| 2″ | 2.375 | 60 | 0.154 | 3.912 | 40 STD | 5.441 | 3.653 |
| 0.218 | 5.537 | 80 STD | 7.480 | 5.022 | |||
| 2 1/2″ | 2.875 | 73 | 0.203 | 5.516 | 40 STD | 8.629 | 5.793 |
| 0.276 | 7.010 | 80 STD | 11.411 | 7.661 | |||
| 3″ | 3.500 | 89 | 0.216 | 5.486 | 40 STD | 11.284 | 7.576 |
| 0.300 | 7.620 | 80 STD | 15.272 | 10.253 | |||
| 4″ | 4.500 | 114 | 0.237 | 6.020 | 16.073 | 10.790 | |
| 0.337 | 8.560 | 22.318 | 14.983 | ||||
| 6″ | 6.625 | 168 | 0.188 | 4.775 | 19.252 | 12.924 | |
| 0.203 | 5.516 | 20.739 | 13.923 | ||||
| 0.219 | 5.563 | 22.318 | 14.983 | ||||
| 0.250 | 6.350 | 25.354 | 17.021 | ||||
| 0.280 | 7.112 | 40 STD | 58.263 | 18.974 | |||
| 0.312 | 7.925 | 31.334 | 21.036 | ||||
| 0.375 | 9.525 | 37.285 | 25.031 | ||||
| 0.432 | 10.973 | 80 XHY | 42.561 | 28.573 | |||
| 0.500 | 12.700 | 48.719 | 32.708 | ||||
| 8″ | 8.625 | 219 | 0.188 | 4.775 | 25.233 | 16.940 | |
| 0.203 | 5.156 | 27.198 | 18.259 | ||||
| 0.219 | 5.563 | 29.286 | 19.661 | ||||
| 0.250 | 6.350 | 20 | 33.308 | 22.361 | |||
| 0.277 | 7.036 | 30 | 36.786 | 24.696 | |||
| 0.322 | 8.179 | 40 | 42.352 | 28.554 | |||
| 0.375 | 9.525 | 49.216 | 33.041 | ||||
| 0.406 | 10.312 | 60 | 53.085 | 35.638 | |||
| 0.500 | 12.700 | 80 XHY | 64.627 | 43.388 | |||
| 10″ | 10.750 | 273 | 0.188 | 4.775 | 31.588 | 21.207 | |
| 0.219 | 5.563 | 36.689 | 24.631 | ||||
| 0.250 | 6.350 | 20 | 41.759 | 28.035 | |||
| 0.307 | 7.798 | 30 | 51.002 | 34.240 | |||
| 0.344 | 8.738 | 56.946 | 38.231 | ||||
| 0.365 | 9.271 | 40 STD | 63.301 | 40.483 | |||
| 0.438 | 11.125 | 71.852 | 48.238 | ||||
| 0.500 | 12.700 | 60 XHY | 81.530 | 54.735 | |||
| 0.594 | 15.088 | 80 | 95.969 | 64.429 | |||
| 12″ | 12.750 | 324 | 0.188 | 4.775 | 37.570 | 25.222 | |
| 0.219 | 5.563 | 43.657 | 29.309 | ||||
| 0.250 | 6.350 | 49.713 | 33.375 | ||||
| 0.281 | 7.137 | 55.739 | 37.420 | ||||
| 0.312 | 7.925 | 61.735 | 41.445 | ||||
| 0.375 | 9.525 | 73.824 | 49.562 | ||||
| 0.406 | 10.312 | 79.727 | 53.525 | ||||
| 0.500 | 12.700 | 97.438 | 65.415 | ||||
| 0.562 | 14.275 | 108.966 | 73.154 | ||||
| 14″ | 14.000 | 356 | 0.188 | 4.775 | 41.308 | 27.732 | |
| 0.219 | 5.563 | 48.012 | 32.233 | ||||
| 0.250 | 6.350 | 20 | 54.685 | 36.713 | |||
| 0.281 | 7.137 | 61.327 | 41.172 | ||||
| 0.312 | 7.925 | 67.939 | 45.611 | ||||
| 0.375 | 9.525 | STD | 81.281 | 54.568 | |||
| 0.438 | 11.125 | 40 | 94.498 | 63.441 | |||
| 0.500 | 12.700 | XHY | 107.381 | 72.090 | |||
| 0.625 | 15.875 | 132.983 | 89.278 | ||||
| 16” | 16.000 | 406 | 0.188 | 4.775 | 47.290 | 21.748 | |
| 0.219 | 5.563 | 54.980 | 36.910 | ||||
| 0.250 | 6.350 | 10 | 62.639 | 42.053 | |||
| 0.281 | 7.137 | 70.268 | 47.174 | ||||
| 0.312 | 7.925 | 20 | 77.866 | 52.275 | |||
| 0.344 | 8.738 | 85.677 | 57.519 | ||||
| 0.375 | 9.525 | 30 STD | 93.213 | 62.578 | |||
| 0.438 | 11.125 | 108.433 | 72.797 | ||||
| 0.500 | 12.700 | 40 XHY | 123.289 | 82.770 | |||
| 18″ | 18.000 | 457 | 0.219 | 5.563 | 61.948 | 41.588 | |
| 0.250 | 6.350 | 70.593 | 47.393 | ||||
| 0.281 | 7.137 | 79.208 | 53.176 | ||||
| 0.312 | 7.925 | 20 | 87.792 | 58.939 | |||
| 0.375 | 9.525 | STD | 105.144 | 70.588 | |||
| 0.438 | 11.125 | 30 | 122.369 | 82.152 | |||
| 0.500 | 12.700 | XHY | 139.198 | 93.450 | |||
| 0.562 | 14.275 | 40 | 155.904 | 104.666 | |||
| 0.625 | 15.875 | 172.754 | 115.978 | ||||
| 20″ | 20.000 | 508 | 0.250 | 6.350 | 78.547 | 52.733 | |
| 0.282 | 7.163 | 88.458 | 59.386 | ||||
| 0.312 | 7.925 | 97.719 | 65.604 | ||||
| 0.375 | 9.525 | 20 STD | 117.075 | 78.598 | |||
| 0.438 | 11.125 | 136.305 | 91.508 | ||||
| 0.500 | 12.700 | 30 XHY | 155.106 | 104.130 | |||
| 0.594 | 15.088 | 40 | 183.378 | 123.110 | |||
| 0.625 | 15.875 | 192.640 | 129.328 | ||||
| 0.688 | 17.475 | 211.368 | 141.901 | ||||
| 24″ | 24.000 | 610 | 0.250 | 6.350 | 94.456 | 63.413 | |
| 0.281 | 7.137 | 106.029 | 71.183 | ||||
| 0.312 | 7.925 | 117.573 | 18.932 | ||||
| 0.375 | 9.525 | 20 STD | 140.938 | 64.618 | |||
| 0.438 | 11.125 | 164.176 | 110.219 | ||||
| 0.500 | 12.700 | XHY | 186.923 | 125.490 | |||
| 0.625 | 15.875 | 232.410 | 156.028 | ||||
| 0.688 | 17.475 | 40 | 255.148 | 171.293 | |||
| 0.750 | 19.050 | 277.401 | 186.233 | ||||
| 30″ | 30.000 | 762 | 0.250 | 6.350 | 118.318 | 79.433 | |
| 0.281 | 7.137 | 132.851 | 89.189 | ||||
| 0.312 | 7.925 | 10 | 147.353 | 98.925 | |||
| 0.375 | 9.525 | STD | 176.731 | 118.648 | |||
| 0.438 | 11.125 | 205.983 | 138.286 | ||||
| 0.500 | 12.700 | 20 XHY | 234.647 | 157.530 | |||
| 0.625 | 15.875 | 30 | 292.066 | 196.078 | |||
| 0.688 | 17.475 | 320.817 | 215.380 | ||||
| 0.750 | 19.050 | 348.988 | 234.293 | ||||
| 36″ | 36.000 | 914 | 0.250 | 6.350 | 142.180 | 95.453 | |
| 0.281 | 7.137 | 159.672 | 107.196 | ||||
| 0.312 | 7.925 | 10 | 177.133 | 118.918 | |||
| 0.375 | 9.525 | STD | 215.525 | 142.678 | |||
| 0.438 | 11.125 | 247.790 | 166.353 | ||||
| 0.500 | 12.700 | 20 XHY | 282.372 | 198.570 | |||
| 0.625 | 15.875 | 351.723 | 236.128 | ||||
| 0.688 | 17.475 | 386.487 | 259.467 | ||||
| 0.750 | 19.050 | 420.576 | 282.353 | ||||
| 42″ | 42.000 | 1067 | 0.312 | 7.925 | 206.914 | 138.911 | |
| 0.375 | 9.525 | STD | 248.319 | 166.708 | |||
| 0.500 | 12.700 | XHY | 33.097 | 221.610 | |||
| 0.750 | 19.050 | 492.163 | 330.413 | ||||
| 48″ | 48.000 | 1219 | 0.375 | 9.525 | STD | 284.112 | 190.738 |
| 0.438 | 11.125 | 331.404 | 222.487 | ||||
| 0.500 | 12.700 | XHY | 377.822 | 253.650 | |||
| 0.750 | 19.050 | 563.750 | 378.473 | ||||
| 0.875 | 22.225 | 655.969 | 440.383 | ||||
Following countries prefer to buy Stainless Steel Pipe Material from India
| Stainless Steel Pipe, ASTM A312 TP316, 3 Inch | Thailand, Czechia, Germany, Malaysia |
| Stainless Steel Seamless Pipe, ANSI B36.19, SCH40 | Bangladesh, Malaysia, USA, Finland |
| Stainless Steel U Tubes, ASTM A213 | Kuwait, South Africa, Saudi Arabia (KSA), Brazil |
| SS A312 Seamless Pipes, 10 Inch, 5.8M, SCH 40S | Singapore, Bahrain, South Africa, Singapore |
| ASTM A213 Seamless Stainless Steel Pipes | UK, Philippines, Australia, Nigeria |
| A213 U Tube, Stainless Steel, OD 19.05mm | Hong Kong, Oman, Malaysia, UAE |
| Stainless Steel Round Pipe, ASTM A312, Polished, 12 MM | Canada, Philippines, Malaysia, Singapore |
| ASTM A213 Seamless Tube, OD 26.7 MM, 1.2 MM, Length 7300 MM | Romania, Europe, Japan, Malaysia |
| Stainless Steel oval Pipes, 6 M, 2mm, 3 Inch | Mexico, Egypt, Spain, UK |
| A-312 Stainless Steel Tubes, SCH 10S, 12 Inch | Malaysia, United Kingdom -UK, Europe, UAE |
| ASTM A213 SS Tube, 20mm x 2.0mm x 4880mm | Poland, UK, Canada, Ellington -United States |
| SS Heat Exchanger U Tube, DIN, ANSI Standard | Malaysia, Sweden, Colombia, China |
| ASTM A249 Stainless Steel Tube, 20 FT, 1 Inch, SCH 10S | Los Alamos -Mexico, Malaysia, Taiwan, Philippines |
| Stainless Steel Schedule 40 Pipe | NY 12203 (USA), Singapore, South Korea, Malaysia |
| Stainless Steel Square Pipe | Philippines, Dammam -KSA, Indonesia, Belgium |
| ANSI B36.19 Stainless Steel Schedule 10 Pipe | Europe, Qatar, France, Thailand |
| SS Round Pipe, 1/2 Inch, 6M, SCH 160 | Iran, Chile, Italy, Singapore |
| SS Oval Pipe | Norway, United Arab Emirates (UAE), Turkey, Malaysia |
| SS Rectangular Pipe | Russia, Netherlands, Malaysia, Dubai |