PDO Approved Manufacturer of 310 Stainless Steel Buttweld Fittings, ASTM A403 WP 310 Elbow Price List
In the petroleum industry, it is very likely that the temperature range lies between 700°F to 720°F. Using grades like 304 or even grade 316 may not be feasible simply because they could experience failure. Pipes aside, in a piping system, the pressure applied by the flow of media can wear out ordinary alloys. But if the user were to use Stainless Steel 310 Pipe Fittings, he would be choosing an alternative that saves cost in the long run. Unlike grade 304, which is very economical, grade 310 costs higher. The increased cost of the alloy is because of the inclusion of higher chromium content along with the use of nickel in moderation in the ASTM A403 Uns S31000 Tee. In petroleum refineries, there are catalytic recovery systems, which make use of this alloy.
Stainless Steel 310 Pipe Fittings
ASTM A403 WP310 Elbow
Stainless Steel 310 Fittings
Buy 310 Stainless Steel Fittings, Check SAE 310 SS Cross Price in India.
The temperature in these systems alone lies in the range of 650°F and extends to a temperature of 1000°F. The thermal energy that is given off during these reactions amounts to a high level of heat. The introduction of 310 Stainless Steel Pipe Fittings was solely for the purpose of functioning in mildly cyclic environments, where the temperatures could rise as high as 2000°F. Due to the inclusion of nickel in its chemistry, it becomes possible for the ASTM A403 Wp310 Elbow to withstand such levels of heat, without losing significant strength. The heat resistant behavior alone makes grade 310 Stainless Steel Fittings ideal to be used in ore extraction, furnace as well as the petroleum industry.
Table of Content
Specification Format of Stainless Steel 310 Pipe Fittings
| Specifications | ASTM A403 / ASME SA403 |
|---|---|
| Size | 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated) |
| Standards |
ASME/ANSI B16.9, ASME B16.28, MSS-SP-43 |
| Thickness | 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75 |
| Type | Seamless / Welded / Fabricated |
Most Common Types Of 310 Stainless Steel Buttweld Fittings
1mm - 40mm thickness, SS 310 Buttweld Fittings
stainless steel fittings 310S butt welding dn500 pipe fittings stub end
45 Degree 310 Stainless Steel Short Bend Weld Fittings
seamless 90 degree sch 40 310 stainless pipe fittings elbow
Stainless 310 Pipe Fittings, Hex Nipple , Nipple
Stainless Steel SS310 90 Degree Butt Weld Elbow Sanitary Pipe Fittings
Stainless Steel 45 Degree Elbow SS310 Butt Welded Pipe Fittings
60 degree Stainless Steel 310 butt weld tee asme b16.9 stainless steel fittings
Stainless Steel 310 Butt Weld Tee
stainless pipe fittings/ss 310 Male hose nipple pipe fittings
1/2"-24" inch 310stainless steel fittings butt-welded elbow
ASME B16.9 Stainless 310 Butt Weld Cross Pipe Fittings
Check Availability of ANSI B 16.9 310 Stainless Steel 90 degree Elbow, UNS S31000 Equal Tee weight. SS 310 Grade Reducer in India
ASTM A403 WP 310 Elbow Weight
|
DNM |
Schedule 10SM |
Schedule 40SM |
Schedule 80SM | ||||||
| 900 ElbowM | 450 ElbowM | Equal teeM | 900 ElbowM | 450 ElbowM | Equal teeM | 900 ElbowM | 450 ElbowM | Equal teeM | |
| 8M | 0.02M | 0.01M | 0.03M | 0.03M | 0.02M | 0.06M | 0.04M | 0.03M | 0.07M |
| 10M | 0.03M | 0.02M | 0.05M | 0.03M | 0.02M | 0.03M | 0.06M | 0.04M | 0.09M |
| 15M | 0.06M | 0.03M | 0.09M | 0.08M | 0.04M | 0.10M | 0.10M | 0.05M | 0.14M |
| 20M | 0.07M | 0.03M | 0.13M | 0.08M | 0.04M | 0.17M | 0.11M | 0.05M | 0.20M |
| 25M | 0.14M | 0.08M | 0.28M | 0.15M | 0.11M | 0.29M | 0.22M | 0.14M | 0.38M |
| 32M | 0.23M | 0.11M | 0.49M | 0.26M | 0.17M | 0.59M | 0.40M | 0.23M | 0.68M |
| 40M | 0.30M | 0.17M | 0.68M | 0.40M | 0.23M | 0.86M | 0.51M | 0.29M | 1.02M |
| 50M | 0.50M | 0.25M | 0.85M | 0.70M | 0.4M | 1.28M | 0.91M | 0.59M | 1.59M |
| 65M | 0.85M | 0.48M | 1.41M | 1.40M | 0.77M | 2.19M | 1.81M | 0.99M | 3.13M |
| 80M | 1.25M | 0.63M | 1.77M | 2.20M | 1.08M | 3.31M | 2.97M | 1.50M | 4.45M |
| 90M | 1.70M | 0.75M | 2.67M | 2.83M | 1.42M | 4.08M | 4.00M | 2.00M | 5.44M |
| 100M | 2.10M | 1.08M | 3.46M | 4.47M | 2.09M | 5.27M | 6.18M | 2.81M | 7.71M |
| 150M | 5.45M | 2.72M | 8.07M | 10.89M | 5.44M | 10.99M | 16.32M | 8.16M | 13.61M |
| 200M | 10.20M | 5.33M | 15.65M | 21.54M | 10.77M | 20.91M | 33.11M | 16.56M | 28.12M |
| 250M | 18.15M | 9.75M | 26.46M | 38.56M | 19.27M | 35.38M | 51.71M | 25.86M | 49.90M |
| 300M | 25.80M | 13.62M | 39.46M | 59.42M | 29.71M | 62.14M | 79.38M | 39.69M | 83.91M |
|
Product range and theoretical weights (kg)M | |||||||||
|
DNM |
Schedule 10SM |
Schedule 40SM |
Schedule 80SM | ||||||
| Con reducerM | Ecc reducerM | Reducing teeM | Con reducerM | Ecc reducerM | Reducing teeM | Con reducerM | Ecc reducerM | Reducing teeM | |
| 40x.25M | 0.19M | 0.19M | 0.60M | 0.26M | 0.26M | 0.76M | 0.34M | 0.34M | 0.90M |
| 50x25M | 0.28M | 0.28M | 0.73M | 0.40M | 0.40M | 1.10M | 0.54M | 0.54M | 1.37M |
| 50x40M | 0.31M | 0.31M | 0.76M | 0.45M | 0.45M | 1.15M | 0.59M | 0.59M | 1.43M |
| 80x.50M | 0.55M | 0.55M | 1.56M | 1.00M | 1.00M | 2.91M | 1.79M | 1.79M | 3.91M |
| 100x50M | 0.78M | 0.78M | 2.94M | 1.50M | 1.50M | 4.48M | 1.95M | 1.95M | 6.55M |
| 100x80M | 0.87M | 0.87M | 3.04M | 1.74M | 1.74M | 4.64M | 2.33M | 2.33M | 6.79M |
| 150x80M | 1.82M | 1.82M | 6.86M | 3.95M | 3.95M | 9.68M | 5.51M | 5.51M | 11.57M |
| 150x100M | 1.96M | 1.96M | 7.10M | 4.07M | 4.07M | 11.94M | 5.96M | 5.96M | 11.97M |
| 200x100M | 3.01M | 3.01M | 13.46M | 6.55M | 6.55M | 17.98M | 9.23M | 9.23M | 24.18M |
| 200x150M | 3.19M | 3.19M | 14.08M | 6.74M | 6.74M | 18.82M | 10.12M | 10.12M | 25.31M |
Stainless Steel 310 5d Bend, Check SUS 310 Butt weld Pipe Fittings Dimension, Accept Large Orders of DIN 1.4845 Pipe End Cap
Dimension Table of 310 Stainless Steel Fittings
| Nominal Pipe Size |
Outside Diameter |
Caps | Straight Tees | Straight Crosses | Stub Ends | |||
|---|---|---|---|---|---|---|---|---|
| (inches) | (mm) | (inches) | Length (inches) |
Center to End (inches) |
Center to End (inches) |
Lap Diameter (inches) |
Long Length (inches) |
Short Length (inches) |
| 1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
| 3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
| 1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
| 1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
| 2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
| 2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
| 3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
| 3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
| 4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
| 5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
| 6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
| 8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
| 10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
| 12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
UNS S31000 Equal Tee Mechanical Analysis
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|
| 7.9 g/cm3 | 1402 °C (2555 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 40 % |
One of India’s largest ANSI B 16.9 ASTM A403 F310 Stainless Butt weld Pipe, 1.4841 AISI 310 WP 45 degree Elbow & Pipe Bend, Check Chemical Composition of SS 310 Fittings
1.4841 SS 310 Grade Reducer Chemical Formula
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
|---|---|---|---|---|---|---|---|---|---|
| SS 310 | 0.015 max | 2 max | 0.015 max | 0.020 max | 0.015 max | 24.00 – 26.00 | 0.10 max | 19.00 – 21.00 | 54.7 min |
| SS 310S | 0.08 max | 2 max | 1.00 max | 0.045 max | 0.030 max | 24.00 – 26.00 | 0.75 max | 19.00 – 21.00 | 53.095 min |
Equivalent Grades Of SS 310 Fittings
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
|---|---|---|---|---|---|---|---|
| SS 310 | 1.4841 | S31000 | SUS 310 | 310S24 | 20Ch25N20S2 | – | X15CrNi25-20 |
| SS 310S | 1.4845 | S31008 | SUS 310S | 310S16 | 20Ch23N18 | – | X8CrNi25-21 |
ANSI B 16.9 310 Stainless Steel 90 degree Elbow Price per Piece
| ASTM A403 WP310s Pipe Fittings Price Per Piece in India | ASTM A403 WP310h Fittings Price in INR | ASTM A403 WP310h Fittings Price in UAE Dirham |
| ASTM A403 WP310 Buttweld Fittings Price in India | Rs. 405 | UAE Dirham 20.75 |
| ASTM A403 WP310s Pipe Fittings Price in India | Rs. 291 | UAE Dirham 14.91 |
| ASTM A403 WP310h Buttweld Pipe Fittings Price List | Rs. 623 | UAE Dirham 31.92 |
| ASTM A403 WP310 Elbow Cost in Mumbai | Rs. 580 | UAE Dirham 29.72 |
| Price of ASTM A403 WP310h Fittings in Mumbai | Rs. 676 | UAE Dirham 34.64 |
Do you know who are the best buyers of 310 SS Pipe Fittings
| Stainless Steel 310 Fittings | United Arab Emirates (UAE), Norway, Malaysia, Turkey |
| Stainless Steel 310 Pipe Fittings | Dammam -KSA, Indonesia, Belgium, Philippines. |
| 310S SS Weld Fittings | Canada, Singapore, Malaysia, Philippines |
| SS 310S Concentric Reducer | Japan, Europe, Romania, Malaysia |
| UNS S31000 Elbow | Colombia, Malaysia, Sweden, China |
| GOST 20Ch25N20S2 Stub Ends | Dubai, Netherlands, Russia, Malaysia |
| EN X15CrNi25-20 Lateral Tee | South Africa, Saudi Arabia (KSA), Kuwait, Brazil |
| Werkstoff No 1.4841 Short Radius Elbow | Philippines, Nigeria, Australia, UK |
| SS 310 Long Stub End | Oman, Malaysia, Hong Kong, UAE |
| Stainless Steel 310 Elbow | South Africa, Bahrain, Singapore |
| Stainless Steel 310 Reducer | France, Thailand, Europe, Qatar |
| 310 Stainless Steel Fittings | Germany, Czechia, Malaysia, Thailand |
| 310 Stainless Steel Pipe Fittings | Finland, Malaysia, USA, Bangladesh |
| Astm A403 Wp310 Fittings | Italy, Iran, Chile, Singapore |
| A403 WP310 Elbow | Egypt, Spain, UK, Mexico |
| A403 Grade WP310 Buttweld Fittings | Ellington -United States, Poland, Canada, UK |
| SS 310S Fittings | United Kingdom -UK, Europe, UAE, Malaysia |