Manufacturer of Monel 400 Fittings, ANSI B16.9 UNS N04400 Reducing Elbow and Reducer
In order to produce high quality fittings, it is necessary for a material to exhibit excellent ductility while also retaining its shape to deliver a good performance. Ductile materials like alloy 400 can bend very easily, therefore it is easier to shape them into Monel 400 Pipe Fittings. However, it is possible that this same ductility can cause the fittings to deform over time if not treated appropriately. Hence, the Monel 400 Fittings are required to undergo a cold working treatment. In this treatment, the material undergoes some level of plastic deformation with the application of mechanical stress. The mechanical stress applied at ambient temperature to the Astm B366 Wpnc Elbow causes the crystalline region to undergo some structural changes. Therefore, one can note that the newer product that has been formed will deliver a good performance.
Monel 400 Fittings
Nickel Alloy Astm B366 Wpnc Elbow
Monel 400 Pipe Fittings
ASTM B366 Wpnc Monel Pipe Fittings Supplier, Check dimensions of DIN 2.4360 Pipe End Cap
While exhibiting high strength, stiffness, and hardness, the cold worked Monel 400 Tee is more dimensionally stable and so, will not lose its shape. Amongst all alloys, this copper and nickel containing alloy are capable of withstanding several fluorine based chemicals. For instance, Monel Pipe Fittings, exhibit good performance when in contact with hydrofluoric acid, fluorine, hydrogen fluoride, or even fluorine derivatives. And the Monel Tube Fittings are amongst a few alloys that can withstand the effects of all concentrations of hydrofluoric acid even up to its boiling point temperature.
Table of Content
Monel 400 Fittings Price List in India
| Price of Monel 400 Pipe Fittings | Alloy 400 Fittings Price in India (INR) | Alloy 400 Pipe Fittings Price in USD | Monel 400 Buttweld Fittings Price in UAE Dirham |
|---|---|---|---|
| MONEL TUBE FITTING CAP P/N. M-400-C | INR 583 | $7.78 | 28.58 UAE Dirham |
| MONEL TUBE FITTING TEE M-400-3 | INR 28,412 | $379.18 | 1392.72 UAE Dirham |
| MONEL TUBE FITTING, TEE P/N. M-400-3 | INR 2,236 | $29.84 | 109.61 UAE Dirham |
| REDUCING TEE SCH 40 BW ASTM B 366 GR WPNC S MONEL ALLOY 400UNS NO4400 PER ASME PIPE AND FITTINGS | INR 100,748 | $1344.57 | 4938.54 UAE Dirham |
MSS SP 75 Nickel Alloy 400 Fittings manufacturers, View Specification of Monel 400 Tee, МНЖМц 28-2,5-1,5 Pipe Bend.
Monel 400 Pipe Fittings Material Specification
| Grade | Monel 400 / UNS N04400 |
| size | Seamless Butt Weld Fittings: 1/2" - 10" Welded Butt Weld Fittings: 1/2" - 48" |
|---|---|
| Type | DN15-DN1200 |
| Connection | Welding |
| Form | 90 Elbow, 45 Elbow, Long Radius Elbow, Short Radius Elbow, Concentric Reducer, Eccentric Reducer, Equal Tee, Unequal Tee, Lateral Tee, Cross, Bends 1.5d, 3d, 5d, 10d, U bend, 180 Deg Bend, Short Stub End, Long stub end, End Cap, Dish Cap |
| Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
| Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom MSS Sp-43 Stainless Steel Pipe Fitting |
| Size Range | ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) ASTM A403 Stainless Steel Buttweld Fitting |
| Elbows | Angle : 22.5 deg, 30deg, 45 deg, 90 deg, 180 deg, 1.0D, 1.5D, 2.0D, 2.5D, 3D, 4D, 5D, 6D, 7D-40D . Standard: ASME B16.9, ASME B16.28, ASME B16.25, MSS SP-75 DIN2605 JISB2311 JISB2312 JISB2313, BS, GB, ISO |
| Manufacturing process | Push, Press, Forge, Cast, etc. |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Origin & Mills | Japanese, Indian, USA, Korean, European, Ukraine, Russian |
| Key markets and industries |
|
| Specialized manufacturer of | 90º Elbows, 45º Elbows, Tees, Crosses, Reducers, Pipe Cap, Stub End, Pipe Bend |
| Application & uses |
|
Basic Types Of ANSI B16.9 UNS N04400 Reducing Elbow
Ansi B16.9 UNS N04400 Reducing Elbow And Reducer
Din 2.4360 Pipe End Cap
Alloy 400 Fittings
Monel 400 Tee
Monel Tube Fittings
400 Monel 90 Degree Elbow
Alloy 400 Welded And Seamless Pipe Fittings
Monel 400 Buttweld Fittings
Monel Fittings
ASTM B366 Wpnc Monel Pipe Fittings Mechanical Properties Table
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Monel 400 | 8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80,000 , MPa – 550 | Psi – 35,000 , MPa – 240 | 40 % |
MSS SP 75 Alloy 400 Fittings Chemical Structure
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Monel 400 | 0.30 max | 2.00 max | 0.50 max | 0.024 max | 28.00 – 34.00 | 2.50 max | 63.00 min |
ISO Certified Monel Tube Fittings 90 Degree Elbow, EN NiCu30Fe 90 Degree Elbow, Check Alloy 400 Welded And Seamless Pipe Fittings Weight Chart
Monel 400 Tee Standard Weight Chart
|
CAPS – ANSI B 16.9 dimension | |||
| inches | mm | Height | |
| D | E | ||
| 1/2 | 15 | 21,34 | 25,40 |
| 3/4 | 20 | 26,67 | 31,75 |
| 25 | 33,40 | 38,10 | |
| 1 1/4 | 32 | 42,16 | 38,10 |
| 1 1/2 | 40 | 48,26 | 38,10 |
| 2 | 50 | 60,32 | 38,10 |
| 2 1/2 | 65 | 73,02 | 38,10 |
| 3 | 80 | 88,90 | 50,80 |
| 3 1/2 | 90 | 101,60 | 63,50 |
| 4 | 100 | 114,30 | 63,50 |
| 5 | 125 | 141,30 | 76,20 |
| 6 | 150 | 168,27 | 88,90 |
| 8 | 200 | 219,07 | 101,60 |
| 10 | 250 | 273,05 | 127,00 |
| 12 | 300 | 323,85 | 152,40 |
| 14 | 350 | 355,60 | 165,10 |
| 16 | 400 | 406,40 | 177,80 |
| 18 | 450 | 457,20 | 203,20 |
| 20 | 500 | 508,00 | 228,60 |
| 22 | 550 | 558,80 | 254,00 |
| 24 | 600 | 609,60 | 266,70 |
| 28 | 700 | 711,20 | 266,70 |
| Dimension in mm | |||
Monel Tube Fittings Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Monel 400 | 2.4360 | N04400 | NW 4400 | NA 13 | МНЖМц 28-2,5-1,5 | NU-30M | NiCu30Fe |
400 Monel Fittings, JIS NW 4400 Equal Cross Properties, ASME B16.25, Seamless, Marked Monel 400 Buttweld Fittings Suppliers in India
Physical Composition Chart of Alloy 400 Welded Pipe Fittings
| Property |
Metric Units
|
|
Melting Range
|
1300-1350°C |
|
Density
|
8,800 kg/m³ @ 20°C |
|
Coefficient of Thermal Expansion
|
13.9 x 10 -6 / °C (20°C) |
|
Curie Temperature
|
20-50°C |
|
Themal Conductivity
|
21.8 W/m. °C @ 20°C |
|
Thermal Capacity (Specific Heat)
|
427 J/kg. °C @ 20°C |
|
Electrical Conductivity
|
32 % IACS |
|
Electrical Resistivity
|
0.547 microhm.m @ 20°C |
|
Modulus of Elasticity (tension)
|
179 GPa @ 20°C |
|
Modulus of Rigidity (torsion)
|
65.5 GPa @ 20°C |
|
Poisson’s Ratio
|
0.32 |
Monel 400 Buttweld Fittings Standards
| UNS: | N04400 |
| Specifications: | ASTM B366 |
Are you looking for a supplier who is already supplying to your country regularly? check our export destinations:
| Monel 400 Pipe Fittings | South Africa, Kuwait, Brazil, Saudi Arabia (KSA) |
| Monel 400 Fittings | Nigeria, Australia, Philippines, UK |
| Monel Pipe Fittings | Malaysia, Hong Kong, Oman, UAE |
| Monel Fittings | Singapore, Bahrain, South Africa |
| Astm B366 Wpnc Alloy 400 Fittings | Italy, Iran, Chile, Singapore |
| B366 Wpnc Monel Tube Fittings | Turkey, Norway, Malaysia, United Arab Emirates (UAE) |
| Nickel Alloy Bw-Fitting Tee B366 | Dammam -KSA, Belgium, Philippines, Indonesia. |
| Monel Twin Ferrules 90 Degree Union Elbows 1/16" to 1 1/2" Inch Tube Fitting | Canada, Malaysia, Philippines, Singapore |
| Monel 400 BSPT NPT Thread Screw Stainless Steel Pipe Fitting | Europe, Romania, Japan, Malaysia |
| Bulkhead Male Connector Monel Instrument Tube Fitting | Colombia, Sweden, China, Malaysia |
| ANSI B16.11 Monel Forged Tee Pipe Fittings | Netherlands, Russia, Dubai, Malaysia |
| Monel High Pressure NPT/BSPT Female Thread Flared Fitting | Egypt, UK, Mexico, Spain |
| UNS N04400 /WPNC/CRNC Union Tee Monel Instrument Tube Fitting | Ellington -United States, Poland, Canada, UK |
| Male to Female Connectors Thread Adaptors High Pressure Pipe Fittings | United Kingdom -UK, Europe, UAE, Malaysia |
| Double Ferrules Inch Tube 1/2" to NPT 1/2" Male Connector Fitting | Thailand, Europe, France, Qatar |
| 1/2" to Female Thread 1/2"NPT Double Ferrules Connectors Inch Tube Fitting | Czechia, Malaysia, Germany, Thailand |
| 38mm Metric Double Ferrules Straight Union Tube Fittings 2000psi | Finland, USA, Bangladesh, Malaysia |