IS 2062 Grade B Mild Steel Plate, IS 2062 Grade B Sheet supplier in India
The content of carbon in mild steel ranges anywhere between 0.05% to 0.25% of the total weight of the component. The alloy is favored amongst many Mild Steel Sheet Metal Suppliers for its economic value. Apart from being an inexpensive alloy, the ductility and durability make the material useful across several industries. Though the IS 2062 Mild Steel Sheet is ductile, the material is difficult to increase its strength and hardness by using treatments like heating or even quenching. Moreover, in comparison to high carbon steel alloys, the IS 2062 Grade B Mild Steel Griddle Plate has a lower carbon content. Therefore the tensile strength of mild steel is comparatively lower than their high carbon counterparts.
IS 2062 Mild Steel Sheet
IS 2062 Grade B Plate
IS 2062 Grade B Carbon Steel Chequered Plate
IS 2062 Gr.b Hot Rolled Mild Steel Plates, Buy Large Quantity From IS 2062 Grade B Carbon Steel Sheet At Lowest Price In India
The use of a Mild Steel Checker Plate is in applications where the level of stress is not very high. Though, its ductility is put to use in the most efficient manner in the form of mechanical engineering applications. The Mild Steel Chequered Plate has a special use for general fabrication as well. Unlike stainless steel alloys that offer superior corrosion resistance properties, the A36 Mild Steel does not offer good corrosion resistance. It is not unusual that any Mild Steel Shim Suppliers recommend using this alloy, especially those environments that have corrosive compounds. Since the alloy is likely to get corroded by exposure to the atmosphere, using coating or finishes like galvanization improves their performance and delays the onset of corrosion.
Table of Content
IS 2062 Grade B Sheet Material Specification Table
| ASTM Standard Specification | ASTM, API, ASME |
| Thickness Chart in Inch | 3/16 to 24″ |
| Size in Milimetre | 1 TO 200 MM Thick IN 1000 TO 3000 MM WIDTH x 2500 / 5000 / 10000 MM / COIL. |
| Length of sheet/ Plate | Single, Double Random & Cut Length |
| Plates Width (Milimeter) | 1500 / 1800 / 1250 / 2000 / 2500 mm |
| Form of Plate and Sheet | Coils, Plain Sheet, Strip, Foils, Rolls, Flats, Ring (Flange), Blank (Circle) etc. |
| Finish | Cold rolled sheet (CR), Hot rolled plate (HR), 2B, BA NO(8), 2D, SATIN (Met with Plastic Coated) |
| Specialization | Perforated Sheet, Shim Sheet, B. Q. Profile |
| Oil can |
|---|
| 0.28 x 895/905/935 x 660 - Body size for edible oil |
| 0.28 x 895/905/935 x 710 - Body size for cashew nut containers |
| 0.28 x 765 x 510 - End size |
| Temper and Hardness |
| Temper : CA (57) |
| Hardness : 57 , +/-4 HR(30T) |
| Specification : IS: 1993 in Standard/Seconds or TIN SAIL. | |||||
| Code | Nominal coating wt in gm/m2 Per surface | Nominal coating wt in gm/m2 Total both surface | Min average coating mass in gm/m2 | ||
|---|---|---|---|---|---|
| E2.8/2.8 | 2.8 | 5.6 | 4.9 | ||
Type sof IS 2062 Gr.b Hot Rolled Mild Steel Plates
Hot Rolled Is 2062 Gr B Mild Steel Plates
Is 2062 Steel Sheet
Carbon IS 2062 Gr B Plates
IS 2062 Sheet
IS 2062 Steel Plate
Carbon Steel IS 2062 GR.B Plate
Is 2062 Gr B Plates
Is 2062 Gr B High Tensile Plates
Mild Steel IS 2062 Gr B Sheet
IS 2062 Plate
Mild Steel Is 2062 Gr B Plates
Structural Steel Is 2062 Gr B Plates
View IS 2062 Gr.b Shims, Mild Steel IS 2062 Gr B Plates, Check IS 2062 Gr B Plates Dimension
IS 2062 Grade B Carbon Steel Plates Dimension Chart in MM
| Plate/ Sheet Surface finish | Thickness Chart (mm) | Width in (maximum mm) |
|---|---|---|
| 2D –heat treated, pickled Sheet, Cold rolled | 0.4–6.35 | 1524 |
| 2B – heat treated, pickled, Cold rolled, skin passed Sheet | 0.25–8.0 | 2032 |
| 2R – bright annealed, Cold rolled plate | 0.25–3.5 | 1524 |
| 2E – mechanically descaled plate,heat treated, Cold rolled, | 0.4–8.0 | 2032 |
| 2H – Work hardened plate | 0.4–6.35 | 1524 |
| Polished Plate,brushed plate | 0.5–4.0 | 1524 |
IS 2062 Grade B Sheet Imperial Dimensions
| Plate/ Sheet Surface finish | Gauge Table (in) | Width (Maximum in) |
|---|---|---|
| BA Mexinox only | 18–28 | 48 |
| Polished Sheet (not brushed) | 11–24 | 60 |
| Temper rolled Sheet Mexinox only | 13–29 | 48 |
| 2B – heat treated, pickled, Cold rolled, skin passed Sheet | 10–24 | 72* |
| 2D –heat treated, pickled Sheet, Cold rolled | 12–24 | 60 |
Size Chart of IS 2062 Gr.b Shims
| IS 2062 Gauge Width and Length | Weight per Sheet | Weight per Sq. Ft. |
|---|---|---|
| 7 (.1874") x 48 x 120 milimeter | 314.8 | 7.871 |
| 10 (.135") x 48 x 120 milimeter | 226.8 | 5.670 |
| 11 (.120") x 36 x 120 milimeter | 151.2 | 5.040 |
| 11 (.120") x 48 x 96 milimeter | 161.3 | 5.040 |
| 11 (.120") x 48 x 120 milimeter | 201.6 | 5.040 |
| 11 (.120") x 48 x 144 milimeter | 241.9 | 5.040 |
| 11 (.120") x 60 x 96 milimeter | 252.0 | 5.040 |
| 12 (.105") x 36 x 120 milimeter | 132.3 | 4.410 |
| 12 (.105") x 48 x 120 milimeter | 176.4 | 4.410 |
| 12 (.105") x 60 x 120 milimeter | 220.5 | 4.410 |
| 14 (.075") x 36 x 120 milimeter | 94.50 | 3.150 |
| 14 (.075") x 48 x 120 milimeter | 126.0 | 3.150 |
| 16 (.060") x 36 x 120 milimeter | 75.60 | 2.520 |
| 16 (.060") x 48 x 96 milimeter | 80.64 | 2.520 |
| 16 (.060") x 48 x 120 milimeter | 100.8 | 2.520 |
| 16 (.060") x 60 x 120 milimeter | 126.0 | 2.520 |
| 18 (.048") x 36 x 120 milimeter | 60.48 | 2.016 |
| 18 (.048") x 48 x 120 milimeter | 80.64 | 2.016 |
| 20 (.036") x 36 x 120 milimeter | 45.36 | 1.512 |
| 20 (.036") x 48 x 120 milimeter | 60.48 | 1.512 |
| 22 (.030") x 36 x 120 milimeter | 37.80 | 1.260 |
| 22 (.030") x 48 x 96 milimeter | 40.32 | 1.260 |
| 22 (.030") x 48 x 120 milimeter | 50.40 | 1.260 |
| 24 (.024") x 36 x 120 milimeter | 30.24 | 1.008 |
| 24 (.024") x 48 x 120 milimeter | 40.32 | 1.008 |
| 26 (.018") x 36 x 120 milimeter | 22.68 | .7560 |
| 26 (.018") x 48 x 120 milimeter | 30.24 | .7560 |
| 28 (.015") x 36 x 120 milimeter | 18.90 | .6300 |
Mild Steel IS 2062 Gr B Plates Weight Chart in MM
| Thickness Chart in Inches | Plate Weight Chart per Unit Area | Density |
|---|---|---|
| 3/8 | 0.121 lbs/in²85.0714216 Kilogram/meter² | 0.315 lbs/in³8.72 g/centimeter³ |
| 1/2 | 0.161 lbs/in²113.1942056 Kilogram/meter² | 0.315 lbs/in³8.72 g/centimeter³ |
| 3/16 | 0.06000 lbs/in²42.184176 Kilogram/meter² | 0.315 lbs/in³8.72 g/centimeter³ |
| 1/4 | 0.08 lbs/in²56.245568 Kilogram/meter² | 0.315 lbs/in³8.72 g/centimeter³ |
| 5/8 | 0.196 lbs/in²137.8016416 Kilogram/meter² | 0.315 lbs/in³8.72 g/centimeter³ |
| 3/4 | 0.235 lbs/in²165.221356 Kilogram/meter² | 0.315 lbs/in³8.72 g/centimeter³ |
| 1 1/2 | 0.47 lbs/in²330.442712 Kilogram/meter² | 0.315 lbs/in³8.72 g/centimeter³ |
| 1 3/4 | 0.549 lbs/in²385.9852104 Kilogram/meter² | 0.315 lbs/in³8.72 g/centimeter³ |
| 2 | 0.627 lbs/in²440.8246392 Kilogram/meter² | 0.315 lbs/in³8.72 g/centimeter³ |
| 2 1/4 | 0.705 lbs/in²495.664068 Kilogram/meter² | 0.315 lbs/in³8.72 g/centimeter³ |
| 7/8 | 0.274 lbs/in²192.6410704 Kilogram/meter² | 0.315 lbs/in³8.72 g/centimeter³ |
| 1 | 0.313 lbs/in²220.0607848 Kilogram/meter² | 0.315 lbs/in³8.72 g/centimeter³ |
| 1 1/4 | 0.391 lbs/in²274.9002136 Kilogram/meter² | 0.315 lbs/in³8.72 g/centimeter³ |
| 3 | 0.941 lbs/in²661.5884936 Kilogram/meter² | 0.315 lbs/in³8.72 g/centimeter³ |
| 2 1/2 | 0.784 lbs/in²551.2065664 Kilogram/meter² | 0.315 lbs/in³8.72 g/centimeter³ |
| 2 3/4 | 0.862 lbs/in²606.0459952 Kilogram/meter² | 0.315 lbs/in³8.72 g/centimeter³ |
We Have Years Of Expertise In Supplying IS 2062 Chequered Plate Equivalent Properties, IS 2062 Gr.b High Tensile Structural Steel Plate At Our Stockyard
Equivalent of IS 2062 Gr B Plates
| Grade | EN10025(90) | BS4360 | DIN 17100 | NFA 35-501 | EN10025(93) |
| IS2062 GR.B | Fe 430C | 43 C | St 44-3U | E28-3 | S275J0 |
Structural Steel IS 2062 Gr B Plates HSCode
| HS Code | Unit |
|---|---|
| 72084010 | KGS |
Manufacturers of IS 2062 Gr.b Carbon Steel Hr Sheet, IS 2062 Material, IS 2062 Mild Steel Plate, Check Price & Weight of IS 2062 Carbon Steel Plates
IS 2062 Chequered Plate Price List in India
| Product | Price |
|---|---|
| Steel IS 2062 grade of 0.12-2.0mm | $400.00-$600.00/ Metric Ton |
| Is 2062 Steel Plate Iron Sheet | $600.00-$650.00/ Ton |
| 2062 Hot Rolled Steel Plate | $559.00-$609.00/ Ton |
| Hot Rolled Carbon Is 2062 Steel Plate | $350.00-$600.00/ Ton |
Are you worried about timely delivery in your country ? check our supply Network
| Mild Steel IS 2062 GR.A Plates | Europe, UAE, United Kingdom -UK, Malaysia |
| IS 2062 GR.A Mild Steel Plate | Belgium, Philippines, Dammam -KSA, Indonesia. |
| GR.A IS 2062 Mild Steel Plate 2B Finish | France, Qatar, Thailand, Europe |
| Mild Steel IS 2062 GR.A Plates | Germany, Czechia, Malaysia, Thailand |
| MS IS 2062 Cold Drown Plates | Bangladesh, Finland, USA, Malaysia |
| Mild Steel IS 2062 GR.A Plates | Kuwait, Brazil, Saudi Arabia (KSA), South Africa |
| IS 2062 GR.A MS Plates | Bahrain, South Africa, Singapore |
| MS IS 2062 GR.A plates | Australia, Philippines, UK, Nigeria |
| MS GR.A IS 2062 Plates | Hong Kong, Oman, UAE, Malaysia |
| IS 2062 MS Plates | Iran, Chile, Singapore, Italy |
| IS 2062 GR.A MS Plates | Norway, Turkey, United Arab Emirates (UAE), Malaysia |
| Cold Rolled Mild Steel IS 2062 Plates | Dubai, Netherlands, Russia, Malaysia |
| IS 2062 GR.A #4 Finish Mild Steel Plates | Mexico, Egypt, UK, Spain |
| Mild Steel IS 2062 GR.A Chequered Plate | Poland, Canada, UK, Ellington -United States |
| Hot Rolled Mild Steel IS 2062 GR.A Plates | Philippines, Canada, Malaysia, Singapore |
| Mild Steel GR.A IS 2062 HR Plates | Romania, Europe, Japan, Malaysia |
| IS 2062 Mild Steel Plates | China, Colombia, Sweden, Malaysia |