• +91-022-23898902
  • sales@steelmetind.com / steelmetind@gmail.com

Check IS 2062 Mild Steel Bright Bar, IS 2062 E250 Rod Manufacturer in India

Industries that require economically feasible options prefer the use of mild steel for their projects. Mild steel contains iron and low content of carbon. This makes them the only two alloyants present in a Half Round Mild Steel Bar. The lower the alloyants used in an alloy, the lesser the cost of the material and the lower the properties of the products. With zero to very little resistance to corrosion, the applications that make use of this alloy include mechanical engineers for their projects. Essentially, they use the Mild Steel Flat Bar solely because it is ductile and are aware of the lack of corrosion resistance properties. Yet, this is a feature that can be rectified. Many Mild Steel Round Bar Suppliers supply bars that have been finished with either zinc coating, galvanization, or even carburizing. As with stainless steel, it is possible to increase some mechanical and corrosion resistance properties of the Bright Mild Steel Square Bar. By using hot dipped galvanization, the bars or rods have a thick coating of zinc that covers them. This not only improves the surface finish but also protects the Mild Steel Round Stock from oxidation.

IS 2062 Mild Steel Round bar
IS 2062 Mild Steel Round bar
Bright Mild Steel Bar
Bright Mild Steel Bar
Mild Steel Round Bar
Mild Steel Round Bar

Check Weight Chart of IS 2062 Material, Mild Steel Round bar Suppliers

Oxidation is an issue in steel alloys that lack a high content of chromium. In the presence of air, oxygen reacts with iron in the steel to form rust, which considerably weakens the alloy. Bright Mild Steel Bar Suppliers also stock up on bars that have been treated with heat by a process known as carburization. This process increases the surface hardness while leaving the core just as is. In the presence of a carbon source like charcoal, or carbon monoxide gas, the steel is heated. Upon being heated, the carbon atoms get attached to the free iron atoms that are present on the surface of the Is 2062 Mild Steel Round Bar. Due to the crystalline microstructure of steel, some carbon atoms penetrate the alloy reaching areas where the iron atoms are free. Hence, the carbon atoms bind themselves to the iron in the Mild Steel Round Bar creating a border effect. And so the border becomes hard giving the bar an improvement of its durability.


IS 2062 Mild Steel Round bar Specification Chart

Standard ASTM, BS, GB, JIS
Length 1000-2000mm
Thickness 40-50mm
Material Mild Steel
Features Corrosion Proof, Fine Finishing, Perfect Shape
Shape Round
Finishing Polished

Different Types of IS 2062 Mild Steel Bright Bar

IS 2062 Mild Steel Bright Bar
IS 2062 Mild Steel Bright Bar
IS 2062 E250 Rod
IS 2062 E250 Rod
IS 2062 Material
IS 2062 Material
BS4360 IS 2062 Gr B Flat Bar
BS4360 IS 2062 Gr B Flat Bar
Ms IS 2062 Bar
Ms IS 2062 Bar
IS 2062 E350 Square Bar
IS 2062 E350 Square Bar

PED Approved BS4360 IS 2062 Gr B Flat Bar, Check Ms IS 2062 E350 Square Bar, IS 2062 Grade A Hot Rolled Round Bar sizes

IS 2062 E250 Rod Sizes

Size in mm Average Weight
KG/MTR KG/FT
10 0.62 0.18
12 0.90 0.30
14 1.20 0.40
16 1.60 0.50
18 2.00 0.60
20 2.50 0.80
22 3.00 0.90
24 3.56 1.08
25 3.90 1.20
28 4.80 1.50
30 5.55 1.69
32 6.30 1.90
34 7.14 2.18
36 8.00 2.44
40 9.90 3.00
45 12.49 3.81
50 15.40 4.70
56 19.34 5.89
60 22.20 6.80
63 24.47 7.46
63.5 24.86 7.58
65 26.05 7.94
70 30.20 9.20
73 32.86 10.00
75 34.72 10.58
78 37.51 11.43
80 39.50 12.00
83 42.47 12.95
85 44.55 13.58
90 50.00 15.20
92 52.19 15.91
93 53.39 16.27
95 55.65 16.95
100 61.66 18.79
105 67.98 20.72
110 74.60 22.74
115 81.64 24.88
125 96.34 29.36

IS 2062 Material Tolerance

Size
Ovality
Weight
Length
up to 25 mm ± 0.5 mm 25 mm to 35 mm ± 0.6 mm 35 mm to 50 mm ± 0.8 mm 50 mm to 80 mm ± 1 mm 80 mm to 100 mm ± 1.3 mm 100 mm and above ± 1.6 % of diameter.
± 75 % of total tolerance specified on the size.
10 mm to 16 mm ± 5 %
16 mm and above ± 3 %
For fixed length : ± 100 mm
Buy Mild Steel IS 2062 Grade B Polished Bars at factory price, Suppliers of IS 2062 Ms Rod Forged Bar, S275J0 Steel Hex Bar Dimension

Dimension of BS4360 IS 2062 Gr B Flat Bar

Diametre Weight / Metre Sectional Area Permetre
(d) (w) (a) (p)
5.0 0.15 0.20 1.57
5.5 0.19 0.24 1.73
6.0 0.22 0.28 1.88
7.0 0.3 0.38 2.20
8.0 0.39 0.50 2.51
9.0 0.5 0.64 2.83
10.0 0.62 0.79 3.14
11.0 0.75 0.95 3.46
12.0 0.89 1.13 3.77
14.0 1.21 1.54 4.40
16.0 1.58 2.01 5.03
18.0 2.00 2.54 5.65
20.0 2.47 3.14 6.28
22.0 2.98 3.80 6.91
25.0 3.85 4.91 7.85
28.0 4.83 6.16 8.80
32.0 6.31 8.04 10.05
36.0 7.99 10.18 11.31
40.0 9.86 12.57 12.57
45.0 12.49 15.90 14.14
50.0 15.41 19.64 15.71
56.0 19.34 24.63 17.59
63.0 24.47 31.17 19.79
71.0 31.08 39.59 22.31
80.0 39.46 50.27 25.13
90.0 49.94 63.62 28.27
100.0 61.66 78.54 31.42
110.0 74.6 95.03 34.56
125.0 96.34 112.72 39.27
140.0 120.84 153.94 43.98
160.0 157.84 201.06 50.27
180.0 199.76 254.47 56.55
200.0 246.62 314.16 62.83
HELPFUL TIP: WEIGHT OF S.S / M.S ROUND BARS
Dia(mm) x Dia(mm) x 0.00623 = Weight/Mtr.
Dia(mm) x Dia(mm) x 0.0019 = Weight/Foot.

IS 2062 E350 Square Bar Price In India

IS 2062 Mild Steel Round Bar Price List
hot rolled mild steel galvanized round bar US $480.00-$550.00 / Ton
Mild Steel Hollow Bar US $1800-$2500 / Ton
mild steel sae 2062 round steel bar US $620.00-$670.00 / Ton

IS 2062 Grade A Hot Rolled Round Bar Uses

  • Automobile
  • Fabrication
  • Infrastructure
  • General Engineering
  • Machine building

IS 2062 Ms Rod Forged Bar Equivalent

EN10025(93) EN10025(90) DIN 17100 NFA 35-501 BS4360 JIS3101
S275J0 Fe 430C St 44-3U E28-3 43 C

Grade EN10025(93) EN10025(90) DIN17100 UNI BS JIS
IS2062 E410 S355J2G3 Fe 510D2 St 52-3N Fe 510 50D SS490C

We have a full range Hot Rolled Ms IS 2062 Gr B Cold Drawn Round Bar, Get Quick delivery of Ms IS 2062 E250 Black Bar, Mild Steel IS 2062 Hollow Bar in Mumbai

Chemical Structure of S275J0 Steel Hex Bar

Grade C Mn S P Si Nb+V+Ti C.E. Value
E-410 0.20 max 1.60 max 0.045 max 0.045 max 0.45 max 0.25 max 0.44 max

Ms IS 2062 Gr B Cold Drawn Round Bar Mechanical Properties

Grade Designation Tensile Strength R m Min MPa Yield Stress, R eH Min MPa Percentage Elongation, A at Gauge Length,L0 5.65 So Min Internal Bend Diameter Min Charpy V- Notch Impact Energy Min J
< 20 20-40 40 > ≤ 25 >25 Room Temp. - 20
E 410 (Fe 540) 540 410 390 380 20 2t 3t 50 25

If you searching a supplier from these places check our supplies below

IS 2062 Mild Steel Bright Bars Europe, UAE, United Kingdom -UK, Malaysia
IS 2062 Grade A Hot Rolled Round Bar Belgium, Philippines, Dammam -KSA, Indonesia.
Mild Steel IS 2062 Grade B Polished Bars France, Qatar, Thailand, Europe
IS 2062 Ms Rod Forged Bar Germany, Czechia, Malaysia, Thailand
S275J0 Steel Hex Bar Bangladesh, Finland, USA, Malaysia
Ms IS 2062 Gr B Cold Drawn Round Bar Kuwait, Brazil, Saudi Arabia (KSA), South Africa
Ms IS 2062 E250 Black Bar Bahrain, South Africa, Singapore
Mild Steel IS 2062 Hollow Bar Australia, Philippines, UK, Nigeria
IS 2062 E250 Rod Hong Kong, Oman, UAE, Malaysia
IS 2062 Material Iran, Chile, Singapore, Italy
BS4360 IS 2062 Gr B Flat Bars Norway, Turkey, United Arab Emirates (UAE), Malaysia
Ms IS 2062 Bars Dubai, Netherlands, Russia, Malaysia
IS 2062 E350 Square Bar Mexico, Egypt, UK, Spain