ASTM B443 UNS N06600 Plate, Inconel 600 Coil Manufacturer
In comparison to stainless steel alloys, the cost of using Inconel alloys is significantly higher. Yet in many instances, Inconel 600 Sheet Suppliers will suggest this alloy to their buyers because the material surpasses the mechanical and corrosion resistance expectations. Since the percentage of nickel in 2.4816 Inconel 600 Coil is in the range of about 70%, the performance of this alloy is expected to be good at temperatures as high as 2000 ºF. When the alloy is situated in a carburizing environment where the temperature ranges between 870 ºC to 940 ºC the resistance of the ASTM B168 UNS N06600 Shim Sheet could be rated as good.
Inconel 600 Sheet
ASTM B168 UNS N06600 Plate
Alloy 600 Coil
Alloy 600 Sheet Thickness, Inconel 600 Grade Hot Rolled Plate, View properties of BS NA 13 Foil
Unlike some traditional steel alloys that have an issue with stress related corrosion cracking in the presence of chloride ions, the Inconel 600 Sheet exhibits good performance and can be used in applications where resistance to chlorine is a requirement. The usefulness of this alloy extends to reducing environments, where Inconel 600 can retain several of its important characteristics without becoming vulnerable to corrosion. And since chromium is included in its alloy, Inconel 600 Plate suppliers recommend its use for applications that deal with sulfur containing compounds as well as environments that are associated with rapid oxidation.
Table of Content
Inconel 600 Sheet Specification Format
| Specifications | ASTM B168 / ASME SB168 |
| Dimensions | ASTM, ASME, and API |
| Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Thickness | 4mm-100mm |
| Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Surface Finish | 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, hairline, sand blast, Brush, etching, Hot rolled plate (HR), Cold rolled sheet (CR), SATIN (Met with Plastic Coated) etc |
| Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
Types of ASTM B443 UNS N06600 Plate
Nickel alloy 600 inconel sheet
Nichrome Alloy Inconel 600 plate 1000 x 2000 mm x 2 mm
Hot Rolled 4*8 Inch Incoloy Alloy 600 Sheet
Nickel Alloy Inconel 600 Plate
UNS N06600 alloy steel 2.4816 sheet inconel 600 alloy plate
UNS N06600 Inconel 600 Nonmagnetic Alloy Plate/ Sheet
Inconel 600/Uns N06600 Nickel Alloy Plate
Hot Rolled Inconel 600/Uns N06600 Nickel Plate Sheet
Precision Polished Cold Rolled Inconel 600 Nickel Alloy Strip
Alloy 600 Plate, Check Prices & Sizes of Inconel 600 Strip, GOSt МНЖМц 28-2,5-1,5 Cold Rolled Plates
Inconel 600 Coil Size In Inch
| Size (in inches) | Size (in mm) |
|---|---|
| .125 | 3.18 |
| .134 | 3.40 |
| .156 | 3.96 |
| .187 | 4.75 |
| .250 | 6.35 |
| .312 | 7.92 |
| .375 | 9.53 |
| .500 | 12.7 |
| .600 | 15.9 |
| .750 | 19.1 |
| .875 | 22.2 |
| 1 | 25.4 |
| 1.125 | 28.6 |
| 1.250 | 31.8 |
| 1.500 | 38.1 |
| 1.750 | 44.5 |
| 2 | 50.8 |
| 2.500 | 63.5 |
| 3 | 76.2 |
Weight of Alloy 600 Sheet
| Thickness Chart in Inches | Plate Weight per Unit Area | Density |
|---|---|---|
| 3/16 | 0.06000 lbs/in²42.184176 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1/4 | 0.08 lbs/in²56.245568 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3/8 | 0.121 lbs/in²85.0714216 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1/2 | 0.161 lbs/in²113.1942056 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 5/8 | 0.196 lbs/in²137.8016416 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3/4 | 0.235 lbs/in²165.221356 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 7/8 | 0.274 lbs/in²192.6410704 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 | 0.313 lbs/in²220.0607848 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 1/4 | 0.391 lbs/in²274.9002136 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 1/2 | 0.47 lbs/in²330.442712 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 3/4 | 0.549 lbs/in²385.9852104 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 | 0.627 lbs/in²440.8246392 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 1/4 | 0.705 lbs/in²495.664068 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 1/2 | 0.784 lbs/in²551.2065664 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 3/4 | 0.862 lbs/in²606.0459952 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3 | 0.941 lbs/in²661.5884936 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
Finding the best quality and reasonable 600 Inconel Strip, Inconel 600 Plate in India, Check SB443 EN NiCr15Fe Shim Sheet Dimensions
Inconel 600 Grade Hot Rolled Plate Dimension
| Plate Surface finish | Thickness (mm) | Width (max mm) |
|---|---|---|
| 2B – Cold rolled, heat treated, pickled, skin passed Sheet | 0.25–8.0 | 2032 |
| 2D – Cold rolled, heat treated, pickled Sheet | 0.4–6.35 | 1524 |
| 2E – Cold rolled, heat treated, mechanically descaled plate | 0.4–8.0 | 2032 |
| 2R – Cold rolled, bright annealed plate | 0.25–3.5 | 1524 |
| 2H – Work hardened plate | 0.4–6.35 | 1524 |
| Polished, brushed plate | 0.5–4.0 | 1524 |
ASTM B168 UNS N06600 Plate Imperial Dimensions
| Plate Surface finish | Gauge (in) | Width (max in) |
|---|---|---|
| 2B – Cold rolled, heat treated, pickled, skin passed Plate | 10–24 | 72* |
| 2D – Cold rolled, heat treated, pickled plate | 12–24 | 60 |
| BA Mexinox only | 18–28 | 48 |
| Polished Sheet (not brushed) | 11–24 | 60 |
| Temper rolled Sheet Mexinox only | 13–29 | 48 |
Chemical Structure of BS NA 13 Foil
| Grade Inconel 600 | Ni | C | Mn | Cu | S | Si | Cr | Fe |
| MIN | 72.0 | – | – | – | – | – | 14.0 | 6.0 |
| MAX | – | 0.15 | 1.0 | 0.5 | 0.015 | 0.5 | 17.0 | 10.0 |
Alloy 600 Plate Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation | ardness (Brinell) |
| Inconel 600 | 8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 95,000 , MPa – 655 | Psi – 45,000 , MPa – 310 | 40 % | – |
Check Global sales network For 600 Alloy Checker Plate, ASTM B443 UNS N06600 Perforated Sheet thickness, Alloy Inconel 600 Strip Tape in Mumbai
Thickness Chart of Inconel 600 Strip
|
Cold rolled Inconel 600 thin plate |
0.2-4mm |
|
Hot rolled 600 Inconel medium plate |
4-20mm |
|
Hot rolled ASTM B 168 Inconel 600 thick plate |
20-60mm |
|
Hot rolled Inconel Werkstoff No 2.4816 extra thick plate |
60-115mm |
GOSt МНЖМц 28-2,5-1,5 Cold Rolled Plate Equivalent
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| Inconel 600 | 2.4816 | N06600 | NCF 600 | NA 13 | МНЖМц 28-2,5-1,5 | NC15FE11M | NiCr15Fe | ЭИ868 |
Density of 600 Inconel Strip
| UNS N06600 Inconel 600 Plate density | 304 lb/in3 |
| Specific Heat Btu/lb °F | 0.11 |
|---|---|
| ASTM B168 Alloy 600 Plate melting range | 2470-2575°F |
Inconel 600 Plate Price per kg
| Price of Inconel 600 Plate | Inconel 600 UNS N06600 Plate Price in USD |
|---|---|
| INCONEL ALLOY 600 PLATE 70MM THK AS PER SB 168 UNS NO6600, 2400MM X 2400MM LONG(HOT ROLLED) | $1.54 |
| INCONEL ALLOY 600(UNS N06600)HOT ROLLED PLATE ANNEALED,DESCALED.ASTM B168/ASME SB168 (NICKEL ALLOYS)65MM THK X 900MM X 1 | $22.28 |
| INCONEL PLATE 12MM THK (ALLOY 600) 565MM X565MM | $810.25 |
| INCONEL PLATE 12MM THK (ALLOY 600) 815MM X815MM (NICKEL ALLOYS) | $1693.88 |
An Indian Manufacturer but Global supplier, check what and where
| 14mm Inconel 600 Plate | United Arab Emirates (UAE), Norway, Malaysia, Turkey |
| Alloy 600 Plate | Dammam -KSA, Indonesia, Belgium, Philippines. |
| ASTM B168 UNS N06600 Shim Sheet | Canada, Singapore, Malaysia, Philippines |
| 10mm Inconel 600 Sheet | Japan, Europe, Romania, Malaysia |
| 600 alloy plate | Colombia, Malaysia, Sweden, China |
| Cold Drawn Inconel 600 Nickel Plate | Dubai, Netherlands, Russia, Malaysia |
| 1.5mm/2.0mm/5.0mm/8.0mm thk Inconel 600 Nickel Alloy Plate | South Africa, Saudi Arabia (KSA), Kuwait, Brazil |
| UNS N06600 Inconel 600 Nonmagnetic Alloy Plate/ Sheet | Philippines, Nigeria, Australia, UK |
| 600 Inconel Plate | Oman, Malaysia, Hong Kong, UAE |
| Inconel 600 brushed nickel plate | South Africa, Bahrain, Singapore |
| 600 Inconel Sheet | France, Thailand, Europe, Qatar |
| AMS 5540 Inconel 600 hot rolled plate .0250 x 48.0000 x 48 | Germany, Czechia, Malaysia, Thailand |
| inconel 600 sheet, Thick 0.03 - 1.00 mm, Width 3.0 - 330mm | Finland, Malaysia, USA, Bangladesh |
| Inconel 600 2B/BA Finish decorative sheet | Italy, Iran, Chile, Singapore |
| Inconel 600 Alloy Hot Rolled Plate | Egypt, Spain, UK, Mexico |
| 0.5~4.0mm thickness cold rolled Inconel Plate | Ellington -United States, Poland, Canada, UK |
| inconel 600 Shim Sheet, Thick 0.03 - 1.00 mm, Width 3.0 - 330mm | United Kingdom -UK, Europe, UAE, Malaysia |