• +91-022-23898902
  • sales@steelmetind.com / steelmetind@gmail.com

Class 10.9 Screw, 10.9 Jh Bolt and Grade 10.9 Fasteners Manufacturer in India


It is very common to see grade 10.9 bolts in those applications which require high strength fasteners. Specifically, the automotive industry prefers to use bolts of this grade. Class 10.9 Jh Bolt is similar to bolts that belong to class 8. This Stud Grade 10.9 is a high strength carbon steel alloy. In terms of strength, class 8 bolts have a lower strength in comparison to Class 10.9 Bolt. This alloy is also treated by tempering. Unlike other carbon steel alloys, fasteners belonging to this particular grade contain trace amounts of boron in their chemical composition. Such steels benefit from the addition of Boron. The hardenability of the Grade 10.9 Bolts increases even with the addition of boron in trace quantities. Although this steel has additions of phosphorus and sulfur in its alloy, its composition is lower than the content of carbon in the Grade 10.9 Nuts chemistry.

Grade 10.9 High Tensile Bolts
Grade 10.9 High Tensile Bolts
DIN 6914 Class 10.9 Studs
DIN 6914 Class 10.9 Studs
Grade 10.9 Fasteners
Grade 10.9 Fasteners

Call us to know more about Ready stock of Grade 10.9 Metric Bolts, M20 DIN 6914 Class 10.9 Studs


The wear resistance of the alloy is good, which is why these fasteners are ideal in automobiles, where lack of wear resistance leads to failure. As expected of carbon steel alloys, the corrosion resistance property of 10.9 Bolt is low. To influence good corrosion resistance behavior, many manufacturers recommend using a surface treatment on the Grade 10.9 Threaded Rod. Apart from hot dip galvanization, which is an effective method to delay the onset of corrosion, and helps in the prevention of scratches on the surface of the Grade 10.9 Metric Bolts, there are other useful coatings available in the market. Another common surface treatment is zinc plating. Though zinc plating is mildly effective, the thick coat of zinc applied on the 10.9 Hex Bolt during galvanization is considered to be more efficient in the long run.

 


Accept all small/ Large Orders High Tensile Grade 10.9 Screw, Metric 10.9 Flange Bolts at reasonable price, Check class 10.9 bolt material properties

Grade 10.9 Bolts Properties

Class and Material Chart Nominal Size Range (Milimeter) Mechanical Composition
Proof Load (MPa) Minimum Yield Strength (MPa) Minimum Tensile Strength (MPa)
Class 10.9 Alloy steel, quenched and tempered 5mm - 100mm 830

940

1040


Price of DIN 6914 stud grade 10.9

High Tensile Gr. 10.9 Fasteners Price List Price Per Pcs
High Tensile class 10.9 Socket Head Cap Screw price USD $3.11
Grade 10.9 Allen bolt price USD $4.15
High Tensile Class 10.9 Hex head bolt price USD $6.15
High Tensile Class 10.9 Nuts price USD $1.55
High Tensile Gr 10.9 Machine bolt price USD $5.11

Class 10.9 Jh Bolt Nut Types

20mm 10.9 Grade M38 Hex Bolt
20Milimeter 10.9 Gr M38 Hex Bolts
Grade 10.9 Hex Bolt And Nuts
Grade 10.9 Hex Nuts And Bolts
Grade 10.9 M16 M20 Double Flat U Bolt M3
Grade 10.9 M20 M16 Double Flat U Bolts M3
Grade 10.9 M12 Fully Threaded Stud Bolt Fix Bolt
Grade 10.9 M12 Threaded Stud Fix Bolt
M3 M5 M6 M10 10.9 Grade Shoulder Bolt
M5 M3 M6 M10 10.9 Class Shoulder Bolt
Half Thread Allen Bolt, Class: 10.9
Half Threaded Allen Bolts, Class: 10.9
Full And Half Thread Is1367 Hex Bolt, Grade: 10.9
Half And Full Thread Is1367 Hex Bolts, Grade: 10.9
Hex Bolt Din931 Grade 10.9
Hex Bolt Din931 Grade 10.9
10.9 Grade Benz Bolt Ineer Hex Bolt Size M12*1.5
10.9 Grade Benz Bolt Ineer Hex Bolt Size M12*1.5
Bolt A490 Grade 10.9
Bolt A490 Grade 10.9
Din933 Hexagon Head Bolt Grade 10.9
Din933 Hexagon Head Bolt Grade 10.9
10.9 Class Guardrail Splice Bolt
10.9 Class Guardrail Splice Bolt

Check 10.9 Stainless Steel Bolts Specifications, ASME SA 324 Grade 10.9 Bolt Chemical Composition, Well-Made And Good Price M10 Class 10.9 Hex Nut & Allen Bolt

Class 10.9 Metric Bolt Spec Chart

Grades Grade 10.9 Bolt
Standard ASTM A324, ASME SA324
Size Dia M 20 to 100 mm Inch 3/4" to 3.1/2"
finish Zinc plated / Plain / Hot dip galvanised

Chemical Structure of High Tensile 10.9 Hex Bolt

Carbon Steel 10.9 C P S B
0.20-0.55 0.025 0.025 0.003

Grade 10.9 Threaded Rod Mechanical Behaviour

Grades Size Range PS [MPa] YS (min) [MPa] TS (min) [MPa] Hardness [Rockwell]
Class 10.9 5–100 830 940 1040 C33–39

ASTM A324 Grade 10.9 Threaded Rod & Washer DIN933 Hardware Fasteners, M14 Hsfg Bolts Grade 10.9, Check Dimension of Class 10.9 Bolt

Dimension Table of Grade 8.8 Fasteners

Diameter Chart M4 M5 M6 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M36 M39 M42 M45 M48 M52
Pitch Chart 0.7 0.8 1 1.25 1.5 1.75 2 2 2.5 2.5 2.5 3 3 3.5 3.5 4 4 4.5 4.5 5 5

Across Flat (S) Maximum

Min

7 8 10 13 16 18 21 24 27 30 34 36 41 46 50 55 60 65 70 75 80
6.78 7.78 9.78 12.73 15.73 17.73 20.67 23.67 26.16 29.16 33 35 40 45 49 53.8 510.9 63.1 68.1 73.1 78.1

Thickness Chart (M) Maximum

Min

3.2 4.7 5.2 6.8 8.4 10.8 12.8 14.8 15.8 18 19.4 21.5 23.8 25.6 28.7 31 33.4 34 36 38 42
2.9 4.4 4.9 6.44 8.04 10.37 12.1 14.1 15.1 16.9 18.1 20.2 22.5 24.3 27.4 29.4 31.8 32.4 34.4 36.4 40.4
Across corners (E) Minimum 7.66 8.79 11.05 14.38 17.77 20.03 23.35 26.75 29.56 32.95 37.29 39.55 45.2 50.85 55.37 60.79 66.44 71.3 76.95 82.6 88.25
Minor Diameter at thread (minimum) 3.242 4.134 4.917 6.647 8.376 10.106 11.835 13.835 15.294 17.294 19.294 20.752 23.752 26.211 29.211 31.67 34.67 37.129 40.129 42.587 46.587
Minor Diameter at thread (max) 3.422 4.334 5.153 6.912 8.676 10.441 12.210 14.210 15.744 17.774 19.774 21.252 24.252 26.771 29.771 32.27 35.27 37.799 40.799 43.297 47.297

Metric 10.9 flange bolt Size in MM

Grade 10.9 bolt sizes

You can check our associates and dealers at different part of world

SIZE- M8X20 Grade 10.9 Bolts Bahrain, South Africa, Singapore
stud grade 10.9 Thailand, France, Europe, Qatar
Class 10.9 Bolt Australia, Philippines, Nigeria, UK
DIAMETER D = M12 10.9 Jh Bolt Hong Kong, Oman, Malaysia, UAE
10.9 Metric Bolt Malaysia, USA, Finland, Bangladesh
SIZE M6X12X150 10.9 Hex Bolt Chile, Italy, Iran, Singapore
Grade 10.9 Threaded Rod Norway, Malaysia, United Arab Emirates (UAE), Turkey
Grade 10.9 Nuts Indonesia, Belgium, Dammam -KSA, Philippines.
M14 30 10.9 flange bolt Malaysia, Philippines, Canada, Singapore
10.9 Screw UK, Mexico, Egypt, Spain
Hsfg Bolts Grade 10.9 Poland, Canada, Ellington -United States, UK
M8 X 20 metric 10.9 wheel stud Europe, UAE, United Kingdom -UK, Malaysia
10.9 Allen Bolt Malaysia, Japan, Europe, Romania
10.9 High Tensile Bolts Czechia, Malaysia, Germany, Thailand
Class 10.9 alloy steel Sweden, China, Colombia, Malaysia
DIN 6914 Grade 10.9 Netherlands, Russia, Dubai, Malaysia
M14 10.9 bolt Saudi Arabia (KSA), Kuwait, South Africa, Brazil