The content of carbon in low carbon steel pipes amounts to less than 0.25% of their entire weight. Since the content of carbon in this material is low, many Carbon Steel Pipe Manufacturers use their malleable and ductile characteristics to form pipes with much ease. They have excellent machinability and low carbon means the Black Carbon Steel Pipe is readily weldable, unlike high carbon steel alloys. Aside from these useful properties, the corrosion resistance of this material is very low. To improve their properties, it is possible to furnish them with heat treatments while also employing the use of several finishes. One such example is the use of PTFE to line carbon steel pipes. PTFE is also referred to as Polytetrafluoroethylene. This is a tough, strong, waxy, synthetic resin. The production of this non-flammable resin occurs due to the polymerization of tetrafluoroethylene. Generally coating the Low Carbon Steel Pipe comes with many benefits. Not only is the pipe more durable, but the Ptfe Lined Carbon Steel Pipe exhibits superior resistance to media such as acids, and bases, as well as solvents. Such products are used in applications that demand a high requirement of mechanical properties. Therefore some Carbon Steel Pipe Suppliers recommend using said components for building and structural purposes.
Lining the pipes with PTFE is also advantageous as the coating helps to reduce the occurrence of friction in the Carbon Steel Seamless Pipe. The lesser the friction, the lower is the stress caused on the pipe and the lower is the rate of cracking and pipe failure. This property is also useful in those applications where the ERW Carbon Steel Pipe is used to ferry across media with varying viscosity. Moreover, the wear resistance properties of the Sch 40 Carbon Steel Pipe also see an increase. Lastly, since PTFE has a high tolerance for heat, it is possible to include the Carbon Steel Tube in high temperature applications as well.
Size Chart of Schedule 40 Carbon Steel Pipes | Outer Diameter in MM | 12.7mm-710mm |
Thickness Chart of CS Sch 40 Seamless Pipes in MM | 3mm-45mm | |
Carbon Steel Black Pipe Length | DRL, SRL,11.8M,5.8M | |
Material of Epoxy Lined Carbon Steel Pipes | EN10297-1,EN10216-1, EN10210-1,EN10216-2 | |
Grade Chart of Carbon Steel Square Pipes | E235,E315,E275, E355,C35E,C22E,C45E,38Mn6,C60E,etc. | |
Processing of CS Rectangular Tubing | Hot rolled/cold drawn/hot expansion/cold rolled | |
Low Carbon Steel Tube uses | General and Mechanical Engineering Purposes | |
Surface of Stkm11a Pipes | Galvanized,Bared Black Painting, Coating | |
Cs Seamless Pipes Proctor | Plastic cap | |
Carbon Steel Boiler Tubes Package | Bulk,Bundles | |
ASTM A524 Cs ERW Pipes Inspection | Ultrasonic testing,With Hydraulic Testing or X-ray Test | |
Carbon Steel Tubes Certificate | ISO9001;2015 |
CS Welded Pipes Sizes :-
Standard Chart: API 5CT/5L, ASTM A53, A252, ASTM A500, DIN1626 etc
Material Grade: Gr. B, Gr. A, X42, X52, X56, X60, X65, X70, J55, K55, N80, etc.
Size in MM: 21.3-2540mm outer Diameter, 2.5-20mm WT, 12000 Milimeter longest length
CS Seamless Pipes Sizes:-
Standard Chart: ASTM A53, A106, API 5L, A179, A192, A210, A519, DIN2391, 2448/1629 /1630, etc
Material Grade: Gr. B, Gr. A, ST52, etc
Size in MM: 10.3- 610mm outer Diameter, 1.0-40mm WT, 12000Milimeter longest length
Carbon Steel Seamless PipePrice List | CS Seamless TubePrice |
Seamless Carbon Steel Pipe | US $ 600.0-700.0 / Ton |
Carbon ERW Steel Pipe Hollow Section | US $ 650-900 / Ton |
Carbon Welded Steel Rectangular Pipe | : US $ 600-720 / Ton |
CS Seamless Pipe Tube | US $ 600-720 / Ton |
Types | Wall thickness | Out diameter | Length |
---|---|---|---|
NB Sizes (in stock) | Schedule 5 / 10 / 40 / 80 / 160 | 1/8” ~ 8” | 6m |
Carbon Steel Welded Pipes Suppliers(in Stock + Custom Sizes) | 1.0 ~ 15.0 mm | 5.0mm ~ 1219.2mm | 6m |
API 5L Carbon Steel Seamless Pipes Suppliers(Custom Sizes) | As per requirement | 5.0mm ~ 203.2mm | 6m |
Pipe Size Chart in Inches | Sch40 Thickness Chart | Sch10 Thickness Chart | Sch5 Thickness Chart | ||||||
Outer Diameter |
Inner Diameter |
WT | Outer Diameter |
Inner Diameter |
WT | Outer Diameter |
Inner Diameter |
WT | |
3/4 | 1.050 | 0.824 | 0.113 | 1.050 | 0.884 | 0.083 | 1.050 | 0.920 | 0.065 |
1 | 1.315 | 1.049 | 0.133 | 1.315 | 1.097 | 0.109 | 1.315 | 1.185 | 0.065 |
1-1/4 | 1.660 | 1.380 | 0.140 | 1.660 | 1.442 | 0.109 | 1.660 | 1.530 | 0.065 |
1-1/2 | 1.900 | 1.610 | 0.145 | 1.900 | 1.682 | 0.109 | 1.900 | 1.770 | 0.065 |
2 | 2.375 | 2.067 | 0.154 | 2.375 | 2.157 | 0.109 | 2.375 | 2.245 | 0.065 |
2-1/2 | 2.875 | 2.469 | 0.203 | 2.875 | 2.635 | 0.120 | 2.875 | 2.709 | 0.083 |
3 | 3.500 | 3.068 | 0.216 | 3.500 | 3.260 | 0.120 | 3.500 | 3.334 | 0.083 |
3-1/2 | 4.000 | 3.548 | 0.226 | 4.000 | 3.760 | 0.120 | 4.000 | 3.834 | 0.083 |
4 | 4.500 | 4.026 | 0.237 | 4.500 | 4.260 | 0.120 | 4.500 | 4.334 | 0.083 |
6 | 6.625 | 6.065 | 0.280 | 6.625 | 6.357 | 0.134 | 6.625 | 6.407 | 0.109 |
8 | 8.625 | 7.981 | 0.322 | 8.625 | 8.329 | 0.148 | 8.625 | 8.407 | 0.109 |
NPS Sizes in Inch | Outer Diamter | Schedule Chart | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
(Inch) | (Inch) | 10 | 20 | STD | 30 | XS | 40 | 60 | 80 | 100 | XXS | 120 | 140 | 160 |
3/8 | 0.675 | 6606 | 9147 | 6606 | 9147 | |||||||||
1/2 | 0.84 | 6358 | 8575 | 6358 | 8575 | 17150 | 10908 | |||||||
1 | 1.315 | 4956 | 6670 | 4956 | 6670 | 13340 | 9316 | |||||||
1 1/4 | 1.66 | 4133 | 5638 | 4133 | 5638 | 11276 | 7380 | |||||||
2 | 2.375 | 3177 | 4498 | 3177 | 4498 | 8995 | 7097 | |||||||
2 1/2 | 2.875 | 3460 | 4704 | 3460 | 4704 | 9408 | 6391 | |||||||
3 1/2 | 4 | 2769 | 3896 | 2769 | 3896 | |||||||||
4 | 4.5 | 2581 | 3670 | 2581 | 3670 | 7339 | 4769 | 5782 | ||||||
6 | 6.625 | 2071 | 3195 | 2071 | 3195 | 6390 | 4157 | 5318 | ||||||
8 | 8.625 | 1420 | 1829 | 1574 | 2841 | 1829 | 2307 | 2841 | 3375 | 4971 | 4085 | 4613 | 5147 | |
12 | 12.75 | 961 | 1441 | 1268 | 1922 | 1560 | 2160 | 2644 | 3244 | 3843 | 3843 | 4324 | 5042 | |
14 | 14 | 875 | 1092 | 1313 | 1313 | 1750 | 1533 | 2079 | 2625 | 3283 | 3829 | 4375 | 4921 | |
18 | 18 | 681 | 849 | 1021 | 1192 | 1361 | 1530 | 2042 | 2553 | 3147 | 3743 | 4252 | 4848 | |
20 | 20 | 613 | 919 | 919 | 1225 | 1225 | 1455 | 1989 | 2526 | 3138 | 3675 | 4288 | 4824 | |
24 | 24 | 510 | 766 | 766 | 1147 | 1021 | 1405 | 1978 | 2489 | 3126 | 3700 | 4210 | 4786 | |
30 | 30 | 510 | 817 | 613 | 1021 | 817 | ||||||||
34 | 34 | 450 | 721 | 540 | 901 | 992 | ||||||||
42 | 42 | 583 | 438 | 729 | 875 |
Nominal Bore Size | Outer Diameter | Size Chart | 40S | 5S | 10S | S10 | S20 | S60 | S40 | S80 | XS/80S | S120 | S100 | S160 | S140 | XXS |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
13.72 | 1/4 | 1.7 | 2.24 | 3.02 | ||||||||||||
17.15 | 3/8 | 1.7 | 2.31 | 3.2 | ||||||||||||
20 | 26.67 | 3/4 | 2.9 | 1.7 | 2.1 | 2.87 | 3.91 | 3.91 | 5.56 | 7.82 | ||||||
25 | 33.4 | 1 | 3.4 | 1.7 | 2.8 | 3.38 | 4.55 | 4.55 | 6.35 | 9.09 | ||||||
32 | 42.16 | 1 1/4 | 3.6 | 1.7 | 2.8 | 3.56 | 4.85 | 4.85 | 6.35 | 9.7 | ||||||
40 | 48.26 | 1 1/2 | 3.7 | 1.7 | 2.8 | 3.68 | 5.08 | 5.08 | 7.14 | 10.2 | ||||||
50 | 60.33 | 2 | 3.9 | 1.7 | 2.8 | 3.91 | 5.54 | 5.54 | 9.74 | 11.1 | ||||||
65 | 73.03 | 2 1/2 | 5.2 | 2.1 | 3.1 | 5.16 | 7.01 | 7.01 | 9.53 | 14 | ||||||
90 | 101.6 | 3 1/2 | 5.7 | 2.1 | 3.1 | 5.74 | 8.08 | 8.08 | ||||||||
100 | 114.3 | 4 | 6 | 2.1 | 3.1 | 6.02 | 8.56 | 8.56 | 11.1 | 13.5 | 17.1 | |||||
150 | 168.3 | 6 | 7.1 | 2.8 | 3.4 | 7.11 | 11 | 10.97 | 14.3 | 18.3 | 22 | |||||
300 | 323.9 | 12 | 9.5 | 4 | 4.6 | 6.4 | 14.3 | 10.3 | 17.5 | 12.7 | 25.4 | 21.4 | 33.3 | 28.6 | 25.4 | |
350 | 355.6 | 14 | 9.5 | 4 | 4.8 | 6.4 | 7.9 | 15.1 | 11.1 | 19.1 | 12.7 | 27.8 | 23.8 | 35.7 | 31.8 | |
450 | 457.2 | 18 | 9.5 | 4.2 | 4.8 | 6.4 | 7.9 | 19.1 | 14.3 | 23.8 | 12.7 | 34.9 | 29.4 | 45.2 | 39.7 | |
500 | 508 | 20 | 9.5 | 4.8 | 5.5 | 6.4 | 9.5 | 20.6 | 15.1 | 26.2 | 12.7 | 38.1 | 32.5 | 50 | 44.5 | |
600 | 609.6 | 24 | 9.5 | 5.5 | 6.4 | 6.4 | 9.5 | 24.6 | 17.5 | 31 | 12.7 | 46 | 38.9 | 59.5 | 52.4 | |
650 | 660.4 | 26 | 9.5 | 7.9 | 13 | 12.7 | ||||||||||
750 | 762 | 30 | 9.5 | 6.4 | 7.9 | 7.9 | 13 | 12.7 | ||||||||
800 | 812.8 | 32 | 9.5 | 7.9 | 13 | 17.5 | 12.7 | |||||||||
900 | 914.4 | 36 | 9.5 | 7.9 | 13 | 19.1 | 12.7 |
Sizes Chart | Other Dia | Pipe Inner Dia | Wall Thick | Std to XXHY | Weight Chart | Modulus Section | Sch Pipe # |
Gallon Size |
1/2 | 0.84 | 0.622 | 0.109 | STD | 0.85 | .0407 | 40 | .0158 |
0.546 | 0.147 | XHY | 1.09 | .0478 | 80 | .0122 | ||
0.464 | 0.188 | 1.31 | .0528 | 160 | .0088 | |||
3/4 | 1.05 | 0.824 | 0.113 | STD | 1.13 | .0705 | 40 | .0277 |
0.742 | 0.154 | XHY | 1.48 | .0853 | 80 | .0225 | ||
0.612 | 0.219 | 1.95 | .1006 | 160 | .0153 | |||
1 | 1.315 | 1.049 | 0.133 | STD | 1.68 | .1328 | 40 | .0449 |
0.957 | 0.179 | XHY | 2.17 | .1606 | 80 | .0374 | ||
0.815 | 0.250 | 2.85 | .1904 | 160 | .0271 | |||
1 1/4 | 1.66 | 1.380 | 0.140 | STD | 2.27 | .2346 | 40 | .0777 |
1.278 | 0.191 | XHY | 3.00 | .2913 | 80 | .0666 | ||
1.160 | 0.250 | 3.77 | .3421 | 160 | .0549 | |||
1 1/2 | 1.90 | 1.610 | 0.145 | STD | 2.72 | .3262 | 40 | .1058 |
1.500 | 0.200 | XHY | 3.63 | .4118 | 80 | .0918 | ||
1.338 | 0.281 | 4.86 | .5079 | 160 | .0730 | |||
2 | 2.375 | 2.157 | 0.109 | 2.64 | .4205 | 10 | .1898 | |
2.067 | 0.154 | STD | 3.66 | .5606 | 40 | .1743 | ||
1.939 | 0.218 | XHY | 5.03 | .7309 | 80 | .1534 | ||
1.875 | 0.250 | 5.68 | .8045 | .1434 | ||||
1.813 | 0.281 | 6.29 | .8666 | .1344 | ||||
1.687 | 0.344 | 7.47 | .9806 | 160 | .1161 | |||
2 1/2 | 2.875 | 2.635 | 0.120 | 3.53 | .6870 | 10 | .2833 | |
2.469 | 0.203 | STD. | 5.80 | 1.0640 | 40 | .2487 | ||
2.443 | 0.216 | 6.14 | 1.1169 | .2435 | ||||
2.375 | 0.250 | 7.02 | 1.2468 | .2301 | ||||
2.323 | 0.276 | XHY | 7.67 | 1.3386 | 80 | .2202 | ||
2.125 | 0.375 | 10.02 | 1.6371 | 160 | .1842 | |||
3 | 3.50 | 3.260 | 0.120 | 4.34 | 1.0411 | .4336 | ||
3.188 | 0.156 | 5.58 | 1.3122 | .4147 | ||||
3.156 | 0.172 | 6.12 | 1.4265 | .4064 | ||||
3.124 | 0.188 | 6.66 | 1.5342 | .3984 | ||||
3.068 | 0.216 | STD. | 7.58 | 1.7241 | 40 | .3840 | ||
3.000 | 0.250 | 8.69 | 1.9372 | .3672 | ||||
2.938 | 0.281 | 9.67 | 2.1207 | .3521 | ||||
2.900 | 0.300 | XHY | 10.26 | 2.2253 | 80 | .3431 | ||
2.624 | 0.438 | 14.34 | 2.8774 | 160 | .2811 | |||
3 1/2 | 4.0 | 3.760 | 0.120 | 4.98 | 1.3776 | 10 | .5768 | |
3.548 | 0.226 | STD. | 9.12 | 2.3939 | 140 | .5136 | ||
3.500 | 0.250 | 10.02 | 2.6001 | .4998 | ||||
3.438 | 0.281 | 11.17 | 2.8562 | .4821 | ||||
3.364 | 0.318 | XHY | 12.52 | 3.1400 | 80 | .4617 | ||
4 | 4.5 | 4.260 | 0.120 | 5.62 | 1.7612 | 10 | .7404 | |
4.188 | 0.156 | 7.24 | 2.2354 | .7156 | ||||
4.124 | 0.188 | 8.67 | 2.6296 | .6942 | ||||
4.094 | 0.203 | 9.32 | 2.8173 | .6838 | ||||
4.062 | 0.219 | 10.02 | 3.0184 | .6725 | ||||
4.026 | 0.237 | STD. | 10.80 | 3.2145 | 40 | .6613 | ||
4.000 | 0.250 | 11.36 | 3.3611 | .6528 | ||||
3.938 | 0.281 | 12.67 | 3.7021 | 60 | .6326 | |||
3.876 | 0.312 | 13.97 | 4.0273 | .6126 | ||||
3.826 | 0.337 | XHY | 15.00 | 4.2713 | 80 | .5972 | ||
3.624 | 0.438 | 19.02 | 5.1790 | 120 | .5361 | |||
3.438 | 0.531 | 22.53 | 5.8997 | 160 | .4822 | |||
5 | 5.563 | 5.187 | 0.188 | 10.80 | 4.1161 | 1.0979 | ||
5.125 | 0.219 | 12.51 | 4.7279 | 1.0716 | ||||
5.047 | 0.258 | STD. | 14.63 | 5.4500 | 40 | 1.0391 | ||
5.001 | 0.281 | 15.87 | 5.8644 | 1.0204 | ||||
4.939 | 0.312 | 17.51 | 6.4074 | .99647 | ||||
4.875 | 0.344 | 19.19 | 6.9358 | .9696 | ||||
4.813 | 0.375 | XHY | 20.80 | 7.4300 | 80 | .9449 | ||
4.563 | 0.500 | 27.06 | 9.2534 | 120 | .8495 | |||
4.313 | 0.625 | 32.99 | 10.7976 | 160 | .7590 | |||
6 | 6.625 | 6.407 | 0.109 | 7.59 | 3.5769 | 5 | 1.6748 | |
6.357 | 0.134 | 9.30 | 4.3475 | 10 | 1.6488 | |||
6.313 | 0.156 | 10.79 | 5.0107 | 1.6260 | ||||
6.249 | 0.188 | 12.94 | 5.9351 | 1.5937 | ||||
6.219 | 0.203 | 13.94 | 6.3804 | 1.5780 | ||||
6.187 | 0.219 | 15.00 | 6.8261 | 1.5620 | ||||
6.125 | 0.250 | 17.04 | 7.6905 | 1.5306 | ||||
6.065 | 0.280 | STD. | 18.99 | 8.4958 | 40 | 1.5008 | ||
6.001 | 0.312 | 21.06 | 9.3416 | 1.4688 | ||||
5.937 | 0.344 | 23.10 | 10.111 | 1.4391 | ||||
5.875 | 0.375 | 25.05 | 10.893 | 1.4082 | ||||
5.761 | 0.432 | XHY | 28.60 | 12.224 | 80 | 1.3541 | ||
5.625 | 0.500 | 32.74 | 13.711 | 1.2909 | ||||
5.501 | 0.562 | 36.43 | 14.9806 | 120 | 1.2346 | |||
5.375 | 0.625 | 40.09 | 16.1821 | 1.1787 | ||||
5.187 | 0.719 | 45.39 | 17.8243 | 160 | 1.0977 | |||
4.897 | 0.864 | XXHY | 53.21 | 20.025 | .9784 | |||
4.625 | 1.000 | 60.13 | 21.7719 | .8727 | ||||
4.375 | 1.125 | 66.14 | 23.1237 | .7809 |
ASTM A53 Gr.B | Black and hot-dipped zinc-coated steels pipes welded and seamless |
ASTM A106 Gr.B | Seamless carbon steels for high temperature service |
ASTM SA179 | Seamless cold-drawn low-carbon steels heat exchanger and condenser tubes |
ASTM SA192 | Seamless carbon steels boiler tubes for high pressure |
ASTM SA210 | Seamless Medium-carbon boiler and superheater tubes |
ASTM A213 | Seamless as boiler, superheater, and heat-exchanger tubes |
ASTM A333 GR.6 | seamless and welded carbon and as pipe intended for use at low temperatures. |
ASTM A335 P9,P11,T22,T91 | Seamless ferritic alloy-steels pipe for high-temperature service |
ASTM A336 | Alloy steels forgings for pressure and high-temperature parts |
ASTM SA519 4140/4130 | Seamless carbon for mechanical tubing |
API Spec 5CT J55/K55/N80/L80/P110/K55 | Seamless steel pipe for casing |
API Spec 5L PSL1/PSL2 Gr.b, X42/46/52/56/65/70 | Seamless steel pipe for line pipe |
DIN 17175 | Seamless steel tube for elevated temperture |
DN2391 | Cold drawn seamless prevision pipe |
DIN 1629 | Seamless circular unalloyed steel tubes subject to special requirements |
3PE Coating | 3PP Coating | FBE Coating | Epoxy Coating | Special Painting |
Standard | Grade | Chemical Components (%) | Mechanical Properties | ||||||
C | Si | Mn | P | S | Tensile STrength(Mpa) | Yield STrength(Mpa) | |||
A | ≤0.25 | - | ≤0.95 | ≤0.05 | ≤0.06 | ≥330 | ≥205 | ||
B | ≤0.30 | - | ≤1.2 | ≤0.05 | ≤0.06 | ≥415 | ≥240 | ||
ASTM A106 | A | ≤0.30 | ≥0.10 | 0.29-1.06 | ≤0.035 | ≤0.035 | ≥415 | ≥240 | |
B | ≤0.35 | ≥0.10 | 0.29-1.06 | ≤0.035 | ≤0.035 | ≥485 | ≥275 | ||
ASTM SA179 | A179 | 0.06-0.18 | - | 0.27-0.63 | ≤0.035 | ≤0.035 | ≥325 | ≥180 | |
ASTM SA192 | A192 | 0.06-0.18 | ≤0.25 | 0.27-0.63 | ≤0.035 | ≤0.035 | ≥325 | ≥180 | |
API 5L PSL1 | A | 0.22 | - | 0.90 | 0.030 | 0.030 | ≥331 | ≥207 | |
B | 0.28 | - | 1.20 | 0.030 | 0.030 | ≥414 | ≥241 | ||
X42 | 0.28 | - | 1.30 | 0.030 | 0.030 | ≥414 | ≥290 | ||
X46 | 0.28 | - | 1.40 | 0.030 | 0.030 | ≥434 | ≥317 | ||
X52 | 0.28 | - | 1.40 | 0.030 | 0.030 | ≥455 | ≥359 | ||
X56 | 0.28 | - | 1.40 | 0.030 | 0.030 | ≥490 | ≥386 | ||
X60 | 0.28 | - | 1.40 | 0.030 | 0.030 | ≥517 | ≥448 | ||
X65 | 0.28 | - | 1.40 | 0.030 | 0.030 | ≥531 | ≥448 | ||
X70 | 0.28 | - | 1.40 | 0.030 | 0.030 | ≥565 | ≥483 | ||
API 5L PSL2 | B | 0.24 | - | 1.20 | 0.025 | 0.015 | ≥414 | ≥241 | |
X42 | 0.24 | - | 1.30 | 0.025 | 0.015 | ≥414 | ≥290 | ||
X46 | 0.24 | - | 1.40 | 0.025 | 0.015 | ≥434 | ≥317 | ||
X52 | 0.24 | - | 1.40 | 0.025 | 0.015 | ≥455 | ≥359 | ||
X56 | 0.24 | - | 1.40 | 0.025 | 0.015 | ≥490 | ≥386 | ||
X60 | 0.24 | - | 1.40 | 0.025 | 0.015 | ≥517 | ≥414 | ||
X65 | 0.24 | - | 1.40 | 0.025 | 0.015 | ≥531 | ≥448 | ||
X70 | 0.24 | - | 1.40 | 0.025 | 0.015 | ≥565 | ≥483 | ||
X80 | 0.24 | - | 1.40 | 0.025 | 0.015 | ≥621 | ≥552 |
Carbon Steel Seamless Pipe | Indonesia, Dammam -KSA, Philippines, Belgium |
Carbon Steel Pipe | Australia, Philippines, UK, Nigeria |
Sch 40 Carbon Pipe | Malaysia, Oman, Hong Kong |
12mm Low Carbon Steel Pipes | Italy, Chile, Iran, Singapore |
Sch 40 Steel Pipe | Turkey, United Arab Emirates (UAE), Norway |
Sch 40 Seamless Pipe | Malaysia, Netherlands, Russia |
Coated Carbon Steel Pipe | Spain, Egypt, Mexico, UK, Singapore |
ASTM A524 Cs Seamless Pipe | Europe, United Kingdom -UK, Malaysia |
6 inch Schedule 40 Carbon Pipe | France, Qatar, Europe, Thailand |
Carbon Steel Black Pipe | Germany, Czechia, Thailand,Malaysia |
Epoxy Lined Carbon Pipe | USA, Malaysia, Bangladesh, Finland |
Epoxy Coated Carbon Pipe | Saudi Arabia (KSA), South Africa, Kuwait, Brazil |
4 Inch Sch 120 Carbon Square Pipe/ Tube | South Africa,Singapore, Bahrain |
Low Carbon Steel Tubes | Canada,Ellington -United States, UK |
ASTM A500 Grb Carbon Rectangular Tubing | Malaysia, Philippines, Canada, Singapore |
16mm Carbon Tubing | Japan, Europe, Romania, Poland |
Galvanized Carbon Pipe | Colombia, Sweden, Malaysia, China |
Stkm11a Pipe | Taiwan, Philippines, Los Alamos -Mexico |
Carbon Steel Boiler Tubes | South Korea, Singapore, NY 12203 (USA) |