High temperature applications require durable components, mainly because a high level of heat expelled by the media cause strain on them. Therefore, the ASTM A53 Grade B Seamless Pipe is one of the better options available in carbon steel. Its low cost affords businesses to function with minimal expenditure in comparison to materials like stainless steel. Applications that call for forming or shaping operations need to be ductile. Hence, the A53b Pipe makes use of carbon steel that has some level of ductility such that it could withstand the load of forming operations including processes such as bending, flanging, and welding. Often the ASTM A53 Grade B Pipe is subject to some form of mechanical testing by manufacturers. Out of all mechanical tests, the most common ones include - subjecting the ASTM A53 Pipe to some types of hydrostatic and nondestructive electric tests.
The other mechanical tests for the ASTM A53 Grade B Schedule 40 are a tensile test, a bending test, and a flattening test. According to this specification, there is a particular way of selecting the test specimen, in the event of the pipe being subjected to a bend test. This means several sections of the A53 Steel Pipe will be cut and used for testing. Similarly, for flattening tests, it is required that the sample of the Steel Pipe ASTM A53 is to be smooth on the ends. The samples also need to be burr-free, so the ends should be tested without the presence of any protruding particles. However, this is an exception when the sample of the A53 Gr B Erw Pipe is made on crop ends. To achieve appropriate or accurate test results, the testing on samples is to be performed at ambient temperature settings. In the event of a sample exhibiting flaws, the test sample could be substituted by discarding the previous ASTM A53 Grade B Erw Pipe sample.
Grade | C,max | Mn, max | P,max | S,max | Cu*,max | Ni*, max | Cr*, max | Mo*, max | V*, max | |
Type S(Seamless) | A | 0.25 | 0.95 | 0.05 | 0.05 | 0.40 | 0.40 | 0.40 | 0.15 | 0.08 |
B | 0.30 | 1.20 | 0.05 | 0.05 | 0.40 | 0.40 | 0.40 | 0.15 | 0.08 | |
Type E (Electric-resistance Welded) | A | 0.25 | 0.95 | 0.05 | 0.05 | 0.40 | 0.40 | 0.40 | 0.15 | 0.08 |
B | 0.30 | 1.20 | 0.05 | 0.05 | 0.40 | 0.40 | 0.40 | 0.15 | 0.08 | |
Type F (Furnace-welded) | A | 0.30 | 1.20 | 0.05 | 0.05 | 0.40 | 0.40 | 0.40 | 0.15 | 0.08 |
Grade A | Grade B | |
Tensile Strength, min., psi, (MPa) | 48,000 (330) | 60,000 (415) |
Yield Strength, min., psi, (MPa) | 30,000 (205) | 35,000 (240) |
Standard Pipe Schedule 40 – ASTM A53 Grades A and B – dimensions in mm | ||||||
---|---|---|---|---|---|---|
NPS Designator | DN Designator | Outside Diameter | Inside Diameter | Wall Thickness | Nominal Weight (Mass) per unit Length | |
(mm) | (mm) | (mm) | Plain End (kg/m) | Threads & Couplings (kg/m | ||
1/8″ | 6 | 10.3 | 6.8 | 1.73 | 0.37 | 0.37 |
1/4″ | 8 | 13.7 | 9.2 | 2.24 | 0.63 | 0.63 |
3/8″ | 10 | 17.1 | 12.5 | 2.31 | 0.84 | 0.84 |
1/2″ | 15 | 21.3 | 15.8 | 2.77 | 1.27 | 1.27 |
3/4″ | 20 | 26.7 | 20.9 | 2.87 | 1.69 | 1.69 |
1″ | 25 | 33.4 | 26.6 | 3.38 | 2.5 | 2.5 |
1-1/4″ | 32 | 42.2 | 35.1 | 3.56 | 3.39 | 3.4 |
1-1/2″ | 40 | 48.3 | 40.9 | 3.68 | 4.05 | 4.04 |
2″ | 50 | 60.3 | 52.5 | 3.91 | 5.44 | 5.46 |
2-1/2″ | 65 | 73 | 62.7 | 5.16 | 8.63 | 8.67 |
3″ | 80 | 88.9 | 77.9 | 5.49 | 11.29 | 11.35 |
3-1/2″ | 90 | 101.6 | 90.1 | 5.74 | 13.57 | 13.71 |
4″ | 100 | 114.3 | 102.3 | 6.02 | 16.07 | 16.23 |
5″ | 125 | 141.3 | 158.2 | 6.55 | 21.77 | 22.07 |
6″ | 150 | 168.3 | 154.1 | 7.11 | 28.26 | 28.58 |
8″ | 200 | 219.1 | 202.7 | 8.18 | 42.55 | 43.73 |
10″ | 250 | 273 | 254.5 | 9.27 | 60.29 | 63.36 |
12″ | 300 | 323.8 | 304.8 | 9.52 | 73.78 | 76.21 |
NPS Designator | DN Designator | Outside Diameter | Inside Diameter | Wall Thickness | Nominal Weight (Mass) per unit Length | |
---|---|---|---|---|---|---|
(Inches) | (Inches) | (Inches) | Plain End (lb/ft) | Threads & Couplings (lb/ft) | ||
1/8″ | 6 | 0.405 | 0.269 | 0.068 | 0.24 | 0.25 |
1/4″ | 8 | 0.54 | 0.364 | 0.088 | 0.43 | 0.43 |
3/8″ | 10 | 0.675 | 0.493 | 0.091 | 0.57 | 0.57 |
1/2″ | 15 | 0.84 | 0.622 | 0.109 | 0.85 | 0.86 |
3/4″ | 20 | 1.05 | 0.824 | 0.113 | 1.13 | 1.14 |
1″ | 25 | 1.315 | 1.049 | 0.133 | 1.68 | 1.69 |
1-1/4″ | 32 | 1.66 | 1.38 | 0.14 | 2.27 | 2.28 |
1-1/2″ | 40 | 1.9 | 1.61 | 0.145 | 2.72 | 2.74 |
2″ | 50 | 2.375 | 2.067 | 0.154 | 3.66 | 3.68 |
2-1/2″ | 65 | 2.875 | 2.469 | 0.203 | 5.8 | 5.85 |
3″ | 80 | 3.5 | 3.068 | 0.216 | 7.58 | 7.68 |
3-1/2″ | 90 | 4 | 3.548 | 0.226 | 9.12 | 9.27 |
4″ | 100 | 4.5 | 4.026 | 0.237 | 10.8 | 10.92 |
5″ | 125 | 5.563 | 5.047 | 0.258 | 14.63 | 14.9 |
6″ | 150 | 6.625 | 6.065 | 0.28 | 18.99 | 19.34 |
8″ | 200 | 8.625 | 7.981 | 0.322 | 28.58 | 29.35 |
10″ | 250 | 10.75 | 10.02 | 0.365 | 40.52 | 41.49 |
12″ | 300 | 12.75 | 12 | 0.375 | 49.61 | 51.28 |
NPS Designator | DN Designator | Outside Diameter | Inside Diameter | Wall Thickness | Nominal Weight (Mass) per unit Length | |
---|---|---|---|---|---|---|
(mm) | (mm) | (mm) | Plain End (kg/m) | Threads & Couplings (kg/m | ||
1/8″ | 6 | 10.3 | 5.5 | 2.41 | 0.47 | 0.46 |
1/4″ | 8 | 13.7 | 7.7 | 3.02 | 0.8 | 0.8 |
3/8″ | 10 | 17.1 | 10.7 | 3.2 | 1.1 | 1.1 |
1/2″ | 15 | 21.3 | 13.9 | 3.73 | 1.62 | 1.62 |
3/4″ | 20 | 26.7 | 18.8 | 3.91 | 2.2 | 2.21 |
1″ | 25 | 33.4 | 24.3 | 4.55 | 3.24 | 3.25 |
1-1/4″ | 32 | 42.2 | 32.5 | 4.85 | 4.47 | 4.49 |
1-1/2″ | 40 | 48.3 | 38.1 | 5.08 | 5.41 | 5.39 |
2″ | 50 | 60.3 | 49.3 | 5.54 | 7.48 | 7.55 |
2-1/2″ | 65 | 73 | 59 | 7.01 | 11.41 | 11.52 |
3″ | 80 | 88.9 | 73.7 | 7.62 | 15.27 | 15.39 |
3-1/2″ | 90 | 101.6 | 85.4 | 8.08 | 18.63 | 18.82 |
4″ | 100 | 114.3 | 97.2 | 8.56 | 22.32 | 22.6 |
5″ | 125 | 141.3 | 122.3 | 9.52 | 30.94 | 31.42 |
6″ | 150 | 168.3 | 146.3 | 10.97 | 42.56 | 43.05 |
8″ | 200 | 219.1 | 193.7 | 12.7 | 64.64 | 65.41 |
Permissible Variations for ASTM A53 Grades A and B Pipe | |||
---|---|---|---|
O.D. | Over | Under | |
Outside Diameter | NPS 1/8 to 1-1/2 DN 6 to 40 | 1/64″ (0.4mm) | 1/64″ (0.4mm) |
NPS 2 and up DN 50 and up | 1% | 1% | |
Wall Thickness at Any Point | ——– | 12.50% | |
Weight | 10% | 10% |
Size" | MSL Make | ISMT make | JSL Make |
---|---|---|---|
1/2" | 1,323.53 | 1,316.18 | 1,330.88 |
3/4" | 1,102.94 | 1,095.59 | 1,110.29 |
1" | 955.88 | 948.53 | 963.24 |
1.25" | 911.76 | 904.41 | 919.12 |
1.5" | 808.82 | 801.47 | 816.18 |
Please note: All Above Prices are USD $/Ton. All price list applicable for SCH 40, 60, 80 & XS Pipe
A53b Pipes Standards | ASTM, ASME and API |
---|---|
UNS Designation of Astm A53 Grade B Pipes | UNS K03005 |
Astm A53 Pipes Size | 1/2” NB to 36” NB |
Thickness of Astm A53 Grade B Schedule 40 | 3-12mm |
A53 Steel Pipe Schedules | SCH 40, SCH 80, SCH 160, SCH XS, SCH XXS, All Schedules |
Origin of Steel Pipes Astm A53 | European, Japanese, Korean, US, Russian, Indian (Strictly No Chinese Material) |
Tolerance |
Cold drawn pipe: +/-0.1mm
Cold rolled pipe: +/-0.05mm
|
Craft | Cold rolled and Cold drawn |
A53 Gr B Erw Pipe Type | Seamless / ERW / Welded / Fabricated |
Sa 53 Pipe Form | Round, Hydraulic Etc |
Astm A53 Sch40 Pipes Length | Min 3 Meters, Max18 Meters, or according to customer’s requirement |
End of Astm A53 Grade B Erw Pipe | Plain End, Beveled End, Treaded |
Specialized in Astm A53 Type S | Large Diameter ASTM A53 Grade B Pipe |
Astm A53 Steel Additional Testing | NACE MR0175, NACE TM0177, NACE TM0284, HIC TEST, SSC TEST, H2 SERVICE, IBR, etc. |
UNS | KS | JIS | DIN Type | DIN Number | EN |
---|---|---|---|---|---|
K03005 | SPPS42 | STPG410 | St45 / St42-2 | 1629 /1626 | 1.0408/1.0040 |
Maximum Allowable Pressure (psi) | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
NPS | Outside Diameter | Schedule | ||||||||||||
(in) | (in) | 10 | 20 | 30 | STD | 40 | 60 | XS | 80 | 100 | 120 | 140 | 160 | XXS |
1/4 | 0.54 | 7985 | 7985 | 10798 | 10798 | |||||||||
3/8 | 0.675 | 6606 | 6606 | 9147 | 9147 | |||||||||
1/2 | 0.84 | 6358 | 6358 | 8575 | 8575 | 10908 | 17150 | |||||||
3/4 | 1.05 | 5273 | 5273 | 7187 | 7187 | 10220 | 14373 | |||||||
1 | 1.315 | 4956 | 4956 | 6670 | 6670 | 9316 | 13340 | |||||||
1 1/4 | 1.66 | 4133 | 4133 | 5638 | 5638 | 7380 | 11276 | |||||||
1 1/2 | 1.9 | 3739 | 3739 | 5158 | 5158 | 7247 | 10316 | |||||||
2 | 2.375 | 3177 | 3177 | 4498 | 4498 | 7097 | 8995 | |||||||
2 1/2 | 2.875 | 3460 | 3460 | 4704 | 4704 | 6391 | 9408 | |||||||
3 | 3.5 | 3024 | 3024 | 4200 | 4200 | 6132 | 8400 | |||||||
3 1/2 | 4 | 2769 | 2769 | 3896 | 3896 | |||||||||
4 | 4.5 | 2581 | 2581 | 3670 | 3670 | 4769 | 5782 | 7339 | ||||||
5 | 5.563 | 2273 | 2273 | 3303 | 3303 | 4404 | 5505 | 6606 | ||||||
6 | 6.625 | 2071 | 2071 | 3195 | 3195 | 4157 | 5318 | 6390 | ||||||
8 | 8.625 | 1420 | 1574 | 1829 | 1829 | 2307 | 2841 | 2841 | 3375 | 4085 | 4613 | 5147 | 4971 | |
10 | 10.75 | 1140 | 1399 | 1664 | 1664 | 2279 | 2279 | 2708 | 3277 | 3847 | 4558 | 5128 | 4558 | |
12 | 12.75 | 961 | 1268 | 1441 | 1560 | 2160 | 1922 | 2644 | 3244 | 3843 | 4324 | 5042 | 3843 | |
14 | 14 | 875 | 1092 | 1313 | 1313 | 1533 | 2079 | 1750 | 2625 | 3283 | 3829 | 4375 | 4921 | |
16 | 16 | 766 | 956 | 1148 | 1148 | 1531 | 2009 | 1531 | 2585 | 3157 | 3733 | 4404 | 4882 | |
18 | 18 | 681 | 849 | 1192 | 1021 | 1530 | 2042 | 1361 | 2553 | 3147 | 3743 | 4252 | 4848 | |
20 | 20 | 613 | 919 | 1225 | 919 | 1455 | 1989 | 1225 | 2526 | 3138 | 3675 | 4288 | 4824 | |
22 | 22 | 557 | 835 | 1114 | 835 | 1949 | 1114 | 2506 | 3063 | 3619 | 4176 | 4733 | ||
24 | 24 | 510 | 766 | 1147 | 766 | 1405 | 1978 | 1021 | 2489 | 3126 | 3700 | 4210 | 4786 | |
30 | 30 | 510 | 817 | 1021 | 613 | 817 | ||||||||
32 | 32 | 478 | 766 | 957 | 574 | 1054 | ||||||||
34 | 34 | 450 | 721 | 901 | 540 | 992 | ||||||||
36 | 36 | 425 | 681 | 851 | 510 | 1021 | ||||||||
42 | 42 | 583 | 729 | 438 | 875 |
Size NPS | Pipe O.D. | Wall Thickness | Pipe I.D. | Weight per Foot | Standard to XXHY | Schedule Pipe # |
Section Modulus | Gallon Capacity Per Linear Foot |
---|---|---|---|---|---|---|---|---|
1/2 | 0.84 | 0.109 | 0.622 | 0.85 | STD | 40 | .0407 | .0158 |
0.147 | 0.546 | 1.09 | XHY | 80 | .0478 | .0122 | ||
0.188 | 0.464 | 1.31 | 160 | .0528 | .0088 | |||
0.294 | 0.252 | 1.72 | XXHY | .0577 | .0026 | |||
3/4 | 1.05 | 0.113 | 0.824 | 1.13 | STD | 40 | .0705 | .0277 |
0.154 | 0.742 | 1.48 | XHY | 80 | .0853 | .0225 | ||
0.219 | 0.612 | 1.95 | 160 | .1006 | .0153 | |||
0.308 | 0.434 | 2.44 | XXHY | .1103 | .0077 | |||
1 | 1.315 | 0.133 | 1.049 | 1.68 | STD | 40 | .1328 | .0449 |
0.179 | 0.957 | 2.17 | XHY | 80 | .1606 | .0374 | ||
0.250 | 0.815 | 2.85 | 160 | .1904 | .0271 | |||
0.358 | 0.599 | 3.66 | XXHY | .2136 | .0146 | |||
1 1/4 | 1.66 | 0.140 | 1.380 | 2.27 | STD | 40 | .2346 | .0777 |
0.191 | 1.278 | 3.00 | XHY | 80 | .2913 | .0666 | ||
0.250 | 1.160 | 3.77 | 160 | .3421 | .0549 | |||
0.382 | 0.896 | 5.22 | .4110 | .0328 | ||||
1 1/2 | 1.90 | 0.145 | 1.610 | 2.72 | STD | 40 | .3262 | .1058 |
0.200 | 1.500 | 3.63 | XHY | 80 | .4118 | .0918 | ||
0.281 | 1.338 | 4.86 | 160 | .5079 | .0730 | |||
0.400 | 1.100 | 6.41 | .5977 | .0494 | ||||
2 | 2.375 | 0.109 | 2.157 | 2.64 | 10 | .4205 | .1898 | |
0.154 | 2.067 | 3.66 | STD | 40 | .5606 | .1743 | ||
0.218 | 1.939 | 5.03 | XHY | 80 | .7309 | .1534 | ||
0.250 | 1.875 | 5.68 | .8045 | .1434 | ||||
0.281 | 1.813 | 6.29 | .8666 | .1344 | ||||
0.344 | 1.687 | 7.47 | 160 | .9806 | .1161 | |||
0.436 | 1.503 | 9.04 | XXHY | 1.1043 | .0922 | |||
2 1/2 | 2.875 | 0.120 | 2.635 | 3.53 | 10 | .6870 | .2833 | |
0.203 | 2.469 | 5.80 | STD. | 40 | 1.0640 | .2487 | ||
0.216 | 2.443 | 6.14 | 1.1169 | .2435 | ||||
0.250 | 2.375 | 7.02 | 1.2468 | .2301 | ||||
0.276 | 2.323 | 7.67 | XHY | 80 | 1.3386 | .2202 | ||
0.375 | 2.125 | 10.02 | 160 | 1.6371 | .1842 | |||
0.552 | 1.771 | 13.71 | XXXHY | 1.9971 | .1280 | |||
3 | 3.50 | 0.120 | 3.260 | 4.34 | 1.0411 | .4336 | ||
0.156 | 3.188 | 5.58 | 1.3122 | .4147 | ||||
0.172 | 3.156 | 6.12 | 1.4265 | .4064 | ||||
0.188 | 3.124 | 6.66 | 1.5342 | .3984 | ||||
0.216 | 3.068 | 7.58 | STD. | 40 | 1.7241 | .3840 | ||
0.250 | 3.000 | 8.69 | 1.9372 | .3672 | ||||
0.281 | 2.938 | 9.67 | 2.1207 | .3521 | ||||
0.300 | 2.900 | 10.26 | XHY | 80 | 2.2253 | .3431 | ||
0.438 | 2.624 | 14.34 | 160 | 2.8774 | .2811 | |||
0.600 | 2.300 | 18.6 | XXHY | 3.4243 | .2158 | |||
3 1/2 | 4.0 | 0.120 | 3.760 | 4.98 | 10 | 1.3776 | .5768 | |
0.226 | 3.548 | 9.12 | STD. | 140 | 2.3939 | .5136 | ||
0.250 | 3.500 | 10.02 | 2.6001 | .4998 | ||||
0.281 | 3.438 | 11.17 | 2.8562 | .4821 | ||||
0.318 | 3.364 | 12.52 | XHY | 80 | 3.1400 | .4617 | ||
0.636 | 2..728 | 22.87 | XXHY | 4.8795 | .3085 | |||
4 | 4.5 | 0.120 | 4.260 | 5.62 | 10 | 1.7612 | .7404 | |
0.156 | 4.188 | 7.24 | 2.2354 | .7156 | ||||
0.188 | 4.124 | 8.67 | 2.6296 | .6942 | ||||
0.203 | 4.094 | 9.32 | 2.8173 | .6838 | ||||
0.219 | 4.062 | 10.02 | 3.0184 | .6725 | ||||
0.237 | 4.026 | 10.80 | STD. | 40 | 3.2145 | .6613 | ||
0.250 | 4.000 | 11.36 | 3.3611 | .6528 | ||||
0.281 | 3.938 | 12.67 | 60 | 3.7021 | .6326 | |||
0.312 | 3.876 | 13.97 | 4.0273 | .6126 | ||||
0.337 | 3.826 | 15.00 | XHY | 80 | 4.2713 | .5972 | ||
0.438 | 3.624 | 19.02 | 120 | 5.1790 | .5361 | |||
0.531 | 3.438 | 22.53 | 160 | 5.8997 | .4822 | |||
0.674 | 3.152 | 27.57 | XXHY | 6.7927 | .4054 | |||
5 | 5.563 | 0.188 | 5.187 | 10.80 | 4.1161 | 1.0979 | ||
0.219 | 5.125 | 12.51 | 4.7279 | 1.0716 | ||||
0.258 | 5.047 | 14.63 | STD. | 40 | 5.4500 | 1.0391 | ||
0.281 | 5.001 | 15.87 | 5.8644 | 1.0204 | ||||
0.312 | 4.939 | 17.51 | 6.4074 | .99647 | ||||
0.344 | 4.875 | 19.19 | 6.9358 | .9696 | ||||
0.375 | 4.813 | 20.80 | XHY | 80 | 7.4300 | .9449 | ||
0.500 | 4.563 | 27.06 | 120 | 9.2534 | .8495 | |||
0.625 | 4.313 | 32.99 | 160 | 10.7976 | .7590 | |||
0.750 | 4.063 | 38.59 | XXHY | 12.0954 | .6734 | |||
6 | 6.625 | 0.109 | 6.407 | 7.59 | 5 | 3.5769 | 1.6748 | |
0.134 | 6.357 | 9.30 | 10 | 4.3475 | 1.6488 | |||
0.156 | 6.313 | 10.79 | 5.0107 | 1.6260 | ||||
0.188 | 6.249 | 12.94 | 5.9351 | 1.5937 | ||||
0.203 | 6.219 | 13.94 | 6.3804 | 1.5780 | ||||
0.219 | 6.187 | 15.00 | 6.8261 | 1.5620 | ||||
0.250 | 6.125 | 17.04 | 7.6905 | 1.5306 | ||||
0.280 | 6.065 | 18.99 | STD. | 40 | 8.4958 | 1.5008 | ||
0.312 | 6.001 | 21.06 | 9.3416 | 1.4688 | ||||
0.344 | 5.937 | 23.10 | 10.111 | 1.4391 | ||||
0.375 | 5.875 | 25.05 | 10.893 | 1.4082 | ||||
0.432 | 5.761 | 28.60 | XHY | 80 | 12.224 | 1.3541 | ||
0.500 | 5.625 | 32.74 | 13.711 | 1.2909 | ||||
0.562 | 5.501 | 36.43 | 120 | 14.9806 | 1.2346 | |||
0.625 | 5.375 | 40.09 | 16.1821 | 1.1787 | ||||
0.719 | 5.187 | 45.39 | 160 | 17.8243 | 1.0977 | |||
0.864 | 4.897 | 53.21 | XXHY | 20.025 | .9784 | |||
1.000 | 4.625 | 60.13 | 21.7719 | .8727 | ||||
1.125 | 4.375 | 66.14 | 23.1237 | .7809 |
Pipes Size | Schedule | Wall Thickness | Weight/ft | OD | ID |
---|---|---|---|---|---|
1/8″ | 40 | 0.068 | 0.25 | 0.405 | 0.269 |
1/8″ | 80 | 0.095 | 0.32 | 0.405 | 0.215 |
1/4″ | 40 | 0.088 | 0.43 | 0.54 | 0.364 |
1/4″ | 80 | 0.119 | 0.54 | 0.54 | 0.302 |
3/8″ | 40 | 0.091 | 0.57 | 0.675 | 0.493 |
3/8″ | 80 | 0.126 | 0.74 | 0.675 | 0.423 |
1/2″ | 40 | 0.109 | 0.85 | 0.84 | 0.622 |
1/2″ | 80 | 0.147 | 1.09 | 0.84 | 0.546 |
1/2″ | 160 | 0.188 | 1.31 | 0.84 | 0.464 |
1/2″ | XXH | 0.294 | 1.71 | 0.84 | 0.252 |
3/4″ | 40 | 0.113 | 1.13 | 1.05 | 0.824 |
3/4″ | 80 | 0.154 | 1.47 | 1.05 | 0.742 |
3/4″ | 160 | 0.219 | 1.94 | 1.05 | 0.612 |
3/4′ | XXH | 0.308 | 2.44 | 1.05 | 0.434 |
1″ | 40 | 0.133 | 1.68 | 1.315 | 1.049 |
1″ | 80 | 0.179 | 2.17 | 1.315 | 0.957 |
1″ | 160 | 0.25 | 2.84 | 1.315 | 0.815 |
1″ | XXH | 0.358 | 3.66 | 1.315 | 0.599 |
1-1/4″ | 40 | 0.14 | 2.27 | 1.66 | 1.38 |
1-1/4″ | 80 | 0.191 | 3 | 1.66 | 1.278 |
1-1/4″ | 160 | 0.25 | 3.76 | 1.66 | 1.16 |
1-1/4″ | XXH | 0.382 | 5.21 | 1.66 | 0.896 |
24″ | 140 | 2.062 | 483.12 | 24 | 19.876 |
Nominal | Pipes size | OD mm | Schedule 20 | Schedule 30 | Schedule STD | Schedule 40 | Schedule 60 | Schedule Extra | Strong (XS) | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mm | Inch | Wall | Wt. | Wall | Wt. | Wall | Wt. | Wall | Wt. | Wall | Wt. | Wall | Wt. | |
3 | 1/8 | 10.3 | 1.73 | 0.37 | 1.73 | 0.357 | 2.41 | 0.47 | ||||||
6 | ¼ | 13.7 | 2.24 | 0.63 | 2.24 | 0.625 | 3.02 | 0.804 | ||||||
10 | 3/8 | 17.1 | 2.31 | 0.84 | 2.31 | 0.84 | 3.2 | 1.1 | ||||||
15 | ½ | 21.3 | 2.77 | 1.26 | 2.77 | 1.26 | 3.73 | 1.62 | ||||||
20 | ¾ | 26.7 | 2.87 | 1.69 | 2.87 | 1.68 | 3.91 | 2.2 | ||||||
25 | 1 | 33.4 | 3.38 | 2.5 | 3.38 | 2.5 | 4.55 | 3.24 | ||||||
32 | 11/4 | 42.2 | 3.56 | 3.39 | 3.56 | 3.38 | 4.85 | 4.47 | ||||||
40 | 11/2 | 48.3 | 3.68 | 4.05 | 3.68 | 4.05 | 5.08 | 5.41 | ||||||
50 | 2 | 60.3 | 3.9 | 5.44 | 3.9 | 5.44 | 5.5 | 7.48 | ||||||
65 | 21/2 | 73 | 5.2 | 8.63 | 5.16 | 8.63 | 7 | 11.41 | ||||||
80 | 3/8 | 88.9 | 5.5 | 11.3 | 5.5 | 11.3 | 7.62 | 15.3 | ||||||
90 | 31/2 | 1.6 | 5.74 | 13.57 | 5.74 | 13.57 | 8.08 | 18.63 | ||||||
100 | 4 | 114.3 | 6.02 | 16.07 | 6.02 | 16.07 | 8.56 | 22.3 | ||||||
125 | 5 | 141.3 | 6.6 | 21.77 | 6.55 | 21.77 | 9.53 | 30.9 | ||||||
150 | 6 | 168.3 | 7.11 | 28.26 | 7.11 | 28.26 | 10.97 | 42.5 | ||||||
200 | 8 | 219.1 | 6.35 | 33.3 | 7 | 36.8 | 8.2 | 42.5 | 8.2 | 42.5 | 10.3 | 53.1 | 12.7 | 64.6 |
250 | 10 | 273 | 6.35 | 41.7 | 7.8 | 51.3 | 9.27 | 60.3 | 9.27 | 60.3 | 12.7 | 81.5 | 12.7 | 81.5 |
300 | 12 | 323.9 | 6.35 | 49.7 | 8.4 | 65.2 | 9.53 | 73.8 | 10.3 | 79.7 | 14.3 | 109 | 12.7 | 97.4 |
350 | 14 | 355.6 | 7.92 | 68.1 | 9.53 | 81.3 | 9.53 | 81.3 | 11.13 | 94.3 | 15.1 | 126.4 | 12.7 | 107 |
400 | 16 | 406.4 | 7.92 | 77.9 | 9.5 | 93.3 | 9.53 | 93.3 | 12.7 | 123 | 16.7 | 160 | 12.7 | 123 |
450 | 18 | 457.2 | 7.92 | 87.8 | 11.1 | 122 | 9.53 | 105 | 14.3 | 156 | 19 | 206 | 12.7 | 130 |
500 | 20 | 508 | 9.53 | 117.2 | 12.7 | 155.1 | 9.53 | 177.2 | 15.1 | 183 | 20.6 | 248 | 12.7 | 155.1 |
550 | 22 | 558.8 | 9.53 | 129 | 12.7 | 171 | 9.53 | 129 | 22.2 | 294 | 12.7 | 171 | ||
600 | 24 | 609.6 | 9.53 | 141 | 14.3 | 210 | 9.53 | 141 | 17.4 | 255 | 24.5 | 355 | 12.7 | 187 |
Standard | Grade | Chemical Composition % | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
C | Mn | P | S | Si | Cr | Cu | Ni | Mo | V | ||
ASTM A106 | B | ≤0.30 | 0.29-1.06 | ≤0.035 | ≤0.035 | >0.10 | ≤0.40 | ≤0.40 | ≤0.40 | ≤0.15 | ≤0.08 |
ASTM A53 | B | ≤0.30 | ≤1.20 | ≤0.05 | ≤0.045 | – | ≤0.40 | ≤0.40 | ≤0.40 | ≤0.15 | ≤0.08 |
Standard | Grade | Tensile Strength (MPa) |
Yield Strength (MPa) |
Trans.Elongation (%) |
Impact Test (J) |
---|---|---|---|---|---|
ASTM A106 | B | >415 | ≥240 | ≥16.5 | – |
ASTM A53 | B | >415 | ≥240 | – | – |
A53b Pipe | South Africa, Kuwait, Brazil, Saudi Arabia (KSA) |
ASTM A53 Grade B Pipe | Nigeria, Australia, Philippines, UK |
Ms Black ASTM A53 Grade B Api 5l Seamless Erw Welded Steel Pipe | Malaysia, Hong Kong, Oman, UAE |
Seamless Steel Pipe Grade B ASTM A53 Seamless Boiler Tube | Singapore, Bahrain, South Africa |
ASTM A53 Pipe | Italy, Iran, Chile, Singapore |
Hot Rolled ASTM A53 Grade B Stkm13c 12b Aisi 1020 S20c Sch 120 Od 152mm | Turkey, Norway, Malaysia, United Arab Emirates (UAE) |
ASTM A53 Grade B Schedule 40 | Dammam -KSA, Belgium, Philippines, Indonesia. |
Api 5l ASTM A53 Gr B Carbon Steel Seamless Pipe | Canada, Malaysia, Philippines, Singapore |
A53 Steel Pipe | Europe, Romania, Japan, Malaysia |
6" Schedule 40 ASTM A53 Grade B Galvanized Gi Carbon Seamless Weld Steel | Colombia, Sweden, China, Malaysia |
Steel Pipe ASTM A53 | Netherlands, Russia, Dubai, Malaysia |
Boiler Smls Pipe ASTM 106 Grade B Seamless Pipe | Egypt, UK, Mexico, Spain |
Sa 53 Pipe | Ellington -United States, Poland, Canada, UK |
A53 Gr B Erw Pipe | United Kingdom -UK, Europe, UAE, Malaysia |
Grade ASTM A53 Sch40 Sch80 Seamless Carbon Steel Pipe | Thailand, Europe, France, Qatar |
ASTM A53 Grade B Erw Pipe | Czechia, Malaysia, Germany, Thailand |
ASTM A53 Grade B Seamless Round Steel Pipes | Finland, USA, Bangladesh, Malaysia |