Grade 6061 is an alloy whose chemistry is made up of elements like magnesium and silicon. Both magnesium and silicon added in the 6061 T6 Aluminum Sheet are the primary alloyants. Similar to most aluminum alloys, this grade has decent mechanical properties. The alloy is weldable, which is why the a96061 t6 Hot Rolled Plate is a popular alloy amongst all the other aluminum alloys. Being precipitation hardened or age hardened alloy, the UNS A96061 Chequered Plate has been treated with heat in order to improve the yield strength of the alloy. Tempering the alloy is a method that is employed to enhance the mechanical strength of the 6061 Aluminum Tread Plate by means of precipitation hardening.
One such temper employed on the alloy is designated T6. T6 is a designation that means the alloy, which in this case is the 6061 Aluminum Diamond Plate is to be initially solution treated. After the alloy undergoes a solution treatment process, the alloy is to be first quenched, following which the alloy is to be subsequently aged. The aging process on the 6061 T6 Aluminium Sheet is artificially done to peak or increase the strength of the alloy at a suitable temperature at an elevation, say for instance 150 °C. Because grade 6061 T6 Aluminum Plate is an alloy that can exhibit a strength-to-weight ratio that rates as good, the components are suited to applications in structural, construction, and engineering projects.
6061 T6 | Value |
---|---|
Mn | 0.15 |
Si | 0.4-0.8 |
Cr | 0.15-0.35 |
Cu | 0.15-0.4 |
Fe | 0.7 |
Zn | 0.25 |
Mg | 0.8-1.2 |
Ti | 0.15 |
Al | Balance |
Other Each/Total | 0.005/0.15 |
Tensile Strengtd (PSI) | 45,000 |
---|---|
Yield Strengtd (PSI) | 40,000 |
Shear Strengtd (PSI) | 31,000 |
Elongation in 2″ | 12 |
Brinell Hardness | 95 |
Grade | WERKSTOFF NR. | UNS | DIN | EN | ISO |
6061 T6 | 3.3211 | A96061 | AlMgSiCu | AW-AlMg1SiCu, EN AW-6061 | AlMg1SiCu |
Physical Properties | Value |
---|---|
Density lb/inᶟ | 0.0975 |
Thermal Conductivity, Btu-in/hr-ft²-°F | 1160 |
Electrical Resistivity, Ω-cm | 3.99e-006 |
Size (in inches) | Size (in mm) |
---|---|
.125 | 3.18 |
.134 | 3.40 |
.156 | 3.96 |
.187 | 4.75 |
.250 | 6.35 |
.312 | 7.92 |
.375 | 9.53 |
.500 | 12.7 |
.600 | 15.9 |
.750 | 19.1 |
.875 | 22.2 |
1 | 25.4 |
1.125 | 28.6 |
1.250 | 31.8 |
1.500 | 38.1 |
1.750 | 44.5 |
2 | 50.8 |
2.500 | 63.5 |
3 | 76.2 |
Thickness Chart in Inches | Plate Weight per Unit Area | Density |
---|---|---|
3/16 | 0.06000 lbs/in²42.184176 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1/4 | 0.08 lbs/in²56.245568 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
3/8 | 0.121 lbs/in²85.0714216 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1/2 | 0.161 lbs/in²113.1942056 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
5/8 | 0.196 lbs/in²137.8016416 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
3/4 | 0.235 lbs/in²165.221356 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
7/8 | 0.274 lbs/in²192.6410704 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1 | 0.313 lbs/in²220.0607848 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1 1/4 | 0.391 lbs/in²274.9002136 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1 1/2 | 0.47 lbs/in²330.442712 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1 3/4 | 0.549 lbs/in²385.9852104 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2 | 0.627 lbs/in²440.8246392 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2 1/4 | 0.705 lbs/in²495.664068 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2 1/2 | 0.784 lbs/in²551.2065664 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2 3/4 | 0.862 lbs/in²606.0459952 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
3 | 0.941 lbs/in²661.5884936 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
Plate Surface finish | Thickness (mm) | Width (max mm) |
---|---|---|
2B – Cold rolled, heat treated, pickled, skin passed Sheet | 0.25–8.0 | 2032 |
2D – Cold rolled, heat treated, pickled Sheet | 0.4–6.35 | 1524 |
2E – Cold rolled, heat treated, mechanically descaled plate | 0.4–8.0 | 2032 |
2R – Cold rolled, bright annealed plate | 0.25–3.5 | 1524 |
2H – Work hardened plate | 0.4–6.35 | 1524 |
Polished, brushed plate | 0.5–4.0 | 1524 |
UNS A96061 Diamond Plate Imperial Dimensions
Plate Surface finish | Gauge (in) | Width (max in) |
---|---|---|
2B – Cold rolled, heat treated, pickled, skin passed Plate | 10–24 | 72* |
2D – Cold rolled, heat treated, pickled plate | 12–24 | 60 |
BA Mexinox only | 18–28 | 48 |
Polished Sheet (not brushed) | 11–24 | 60 |
Temper rolled Sheet Mexinox only | 13–29 | 48 |
ASTM Standards | ASTM B209 and ASME SB209 |
Thickness in Milimeter | 0.2~300mm |
Length in Milimeter | 500~10000mm |
Width in Milimeter | 500~2500mm |
Surface Finishes | Bright, hair line, polished, sand blast, brush, checkered, embossed |
Type of Aluminium 2014 Plate & Sheet | Hot-Rolled Plate/ Cold-Rolled Sheet / Plates/ Chequered Plates/ Strips/ Coils |
Coating of Aluminium Sheet | PVC Coated, Polyester, Color Coated, polyurethane, Fluorocarbon, epoxy coating |
6061 T6 Aluminium Sheet Price List | ASTM B209 Plate Per Unit (INR) |
---|---|
Aluminium Sheet 40mm Thickness 6061 Aluminium Plate price per kg | US$ 2.60 - US$ 3.10 / Kilogram |
6000 series 6061 alloy Aluminium sheet plate t4 t6 Prices | US$ 1.80 - US$ 3.00 / Kilogram |
6061 T6 4x8 Aluminium Sheet Plate Prices | US$ 2.30 - US$ 3.50 / Kilogram |
Aluminium Alloy 6061 Plate Prices | US$ 2.40 - US$ 2.90 / Kilogram |
1.2mm 8mm 6061 t6 alloy aluminum sheet | Indonesia, Dammam -KSA, Philippines, Belgium |
Hot Rolled 6061 T6 Aluminium Sheet | France, Qatar, Europe, Thailand |
6061 Aluminum Diamond Plate | Germany, Czechia, Thailand,Malaysia |
1mm 2mm 3mm 4mm thickness 6061 Aluminum Sheet | USA, Malaysia, Bangladesh, Finland |
6061 Aluminum Plate | Saudi Arabia (KSA), South Africa, Kuwait, Brazil |
6061 Aluminum Tread Plate 1.2mm | South Africa,Singapore, Bahrain |
6061 T6 T651 aluminum plates | Australia, Philippines, UK, Nigeria |
2mm 3mm 4mm Hot Rolled Perforated 6061 t6 Aluminum Sheet | Malaysia, Oman, Hong Kong |
12mm thick 6061 T6 Aluminium Plate | Italy, Chile, Iran, Singapore |
ASTM B209 Aluminium 6061 T6 Coil | Turkey, United Arab Emirates (UAE), Norway |
Aluminum 6061 T6 Chequered Plate | Malaysia, Netherlands, Russia |
ASTM B209 Aluminum 6061 t6 Sheet | Spain, Egypt, Mexico, UK, Singapore |
UNS A96061 Aluminium Hot Rolled Plate | Europe, United Kingdom -UK, Malaysia |
Aluminium 6061 T6 Perforated Sheet | Canada,Ellington -United States, UK |
cold rolled 6061-t6 Aluminum Plate | Malaysia, Philippines, Canada, Singapore |
6061-t6 Aluminum Coil 0.7 0.9 1.2mm | Japan, Europe, Romania, Poland |
3mm 4mm 6061-t6 Aluminum Diamond Tread Plate | Colombia, Sweden, Malaysia, China |
6061 T6 Aluminum Plate | Taiwan, Philippines, Los Alamos -Mexico |
Aluminum 6061-t6 Plate | South Korea, Singapore, NY 12203 (USA) |