2b finish 304 Stainless Steel Plate, 18 Gauge ASTM A240 Type 304 Coil supplier in India
Austenitic stainless steel such as alloy 304 has very high ductility and malleability. And because they are malleable, they can be beaten into 304 2b Stainless Steel Shims. Though the production of sheets could be with any width, there are some sheets that have patterns created on them such that they resemble print screens used in textiles. The patterns are created by means of perforations or holes which are punched into the sheet. The manufacture of a 304 Stainless Steel Perforated Sheet could be easily done via means of a laser or by manual processing. Commonly seen in the field of architecture and building construction, the design of the perforations for the 304 Stainless Steel Plate is punched in keeping into account the light and acoustics of the environment.
304 Stainless Steel Sheet
ASTM A240 Gr304 Coil
SA 240 Tp 304 Stainless Steel Plate
Check 304 Stainless Steel Strip, view ASTM A240 SUS 304 Polished Sheet Price in India
In addition to the principles of design, the architect needs to take into factor the environmental conditions. For instance, the ASTM A240 Type 304 304 Stainless Steel Strip is an alloy that works well in those surroundings there the maximum level of oxidation or reduction it can take is somewhere in moderation. And because the alloy can resist atmospheric corrosion, the 304 Stainless Steel Sheet Suppliers often suggest this economical alloy to those industries where it is absolutely vital to control the cost of the entire factory set up. Like grade 316, it is possible to use grade 304 Stainless Steel Sheet for sanitary applications. Though, the buyer must thoroughly understand that the procedure of making the consumer product could take a toll on the 304l Stainless Steel Sheet if used incorrectly.
Table of Content
ASTM A240 Type 304 Stainless Steel Sheet Specifications
| Specifications | ASTM A240 / ASME SA240 |
|---|---|
| Thickness | 4mm-100mm |
| Width |
1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Surface | 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc |
| Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
Stainless Steel 304 Plate Sizes
| Size (in inches) | Size (in mm) |
|---|---|
| .125 | 3.18 |
| .134 | 3.40 |
| .156 | 3.96 |
| .187 | 4.75 |
| .250 | 6.35 |
| .312 | 7.92 |
| .375 | 9.53 |
| .500 | 12.7 |
| .600 | 15.9 |
| .750 | 19.1 |
| .875 | 22.2 |
| 1 | 25.4 |
| 1.125 | 28.6 |
| 1.250 | 31.8 |
| 1.500 | 38.1 |
| 1.750 | 44.5 |
| 2 | 50.8 |
| 2.500 | 63.5 |
| 3 | 76.2 |
Type Of Sa 240 Gr 304 Stainless Steel Plate
0.022 Stainless Sheet 304 Annealed #4
0.032 Stainless Sheet 304 Full Hard
0.024 Stainless Sheet 304 Cold Roll 2B
0.034 Stainless Sheet 304 Annealed #8
0.025 Stainless Sheet 304 1/4 Hard
0.036 Stainless Sheet 304 Annealed #4
0.012 inch Stainless Sheet 304-Annealed 2B
304 1500mm*3000mm mirror stainless steel sheet
0.018 inch Stainless Sheet 304 Annealed #4
0.022 inch SS 304 Sheet
0.015 inch Stainless Sheet 304 Annealed 2B
1 x 4.25 inch Stainless Plate 304 Annealed HRAP
Stainless Steel 304 Sheet Weight Chart
| Thickness Chart in Inches | Plate Weight per Unit Area | Density |
|---|---|---|
| 3/16 | 0.06000 lbs/in²42.184176 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1/4 | 0.08 lbs/in²56.245568 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3/8 | 0.121 lbs/in²85.0714216 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1/2 | 0.161 lbs/in²113.1942056 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 5/8 | 0.196 lbs/in²137.8016416 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3/4 | 0.235 lbs/in²165.221356 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 7/8 | 0.274 lbs/in²192.6410704 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 | 0.313 lbs/in²220.0607848 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 1/4 | 0.391 lbs/in²274.9002136 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 1/2 | 0.47 lbs/in²330.442712 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 3/4 | 0.549 lbs/in²385.9852104 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 | 0.627 lbs/in²440.8246392 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 1/4 | 0.705 lbs/in²495.664068 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 1/2 | 0.784 lbs/in²551.2065664 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 3/4 | 0.862 lbs/in²606.0459952 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3 | 0.941 lbs/in²661.5884936 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
Mirror finish 304 Stainless Steel Sheet Metal, AISI 304 Ring, Check 1.4301 Shim/ Perforated Sheet Dimension
SS 304 Sheet Dimensions
| Plate Surface finish | Thickness (mm) | Width (max mm) |
|---|---|---|
| 2B – Cold rolled, heat treated, pickled, skin passed Sheet | 0.25–8.0 | 2032 |
| 2D – Cold rolled, heat treated, pickled Sheet | 0.4–6.35 | 1524 |
| 2E – Cold rolled, heat treated, mechanically descaled plate | 0.4–8.0 | 2032 |
| 2R – Cold rolled, bright annealed plate | 0.25–3.5 | 1524 |
| 2H – Work hardened plate | 0.4–6.35 | 1524 |
| Polished, brushed plate | 0.5–4.0 | 1524 |
img2222222222 Imperial Dimensions
| Plate Surface finish | Gauge (in) | Width (max in) |
|---|---|---|
| 2B – Cold rolled, heat treated, pickled, skin passed Plate | 10–24 | 72* |
| 2D – Cold rolled, heat treated, pickled plate | 12–24 | 60 |
| BA Mexinox only | 18–28 | 48 |
| Polished Sheet (not brushed) | 11–24 | 60 |
| Temper rolled Sheet Mexinox only | 13–29 | 48 |
SS 304 Plate Density
| Plate Type | Density |
| Stainless Steel 304 Plate | 8.0 g/cm3 |
304 Stainless Steel Plate Melting Point
| Grade | Density (kg/m3) | Elastic Modulus (GPa) | Mean Coefficient of Thermal Expansion (μm/m/°C) | Thermal Conductivity (W/m.K) | Specific Heat 0-100°C (J/kg.K) | Electrical Resistivity (nΩ.m) | |||
| 0-100°C | 0-315°C | 0-538°C | at 100°C | at 500°C | |||||
| 304/L/H | 8000 | 193 | 17.2 | 17.8 | 18.4 | 16.2 | 21.5 | 500 | 720 |
BA finish 304 Stainless Steel Foil, 16 Gauge Ss 304 Plate Properties, View SS GOST 08Х18Н10 Foil and Circles Prices.
Physical Properties Of Stainless Steel 304 Checker Plate
| Grade | Density (kg/m3) | Elastic Modulus (GPa) | Mean Coefficient of Thermal Expansion (μm/m/°C) | Thermal Conductivity (W/m.K) | Specific Heat 0-100°C (J/kg.K) | Electrical Resistivity (nΩ.m) | |||
| 0-100°C | 0-315°C | 0-538°C | at 100°C | at 500°C | |||||
|
304/L/H |
8000 |
193 |
17.2 |
17.8 |
18.4 |
16.2 |
21.5 |
500 |
720 |
SS Uns S30400 Cold Rolled Plates Chemical Properties
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
| 304 | min. max. |
- 0.08 |
- 2.0 |
- 0.75 |
- 0.045 |
- 0.030 |
18.0 20.0 |
- |
8.0 10.5 |
- 0.10 |
| 304H | min. max. |
0.04 0.10 |
- 2.0 |
- 0.75 |
-0.045 |
- 0.030 |
18.0 20.0 |
- |
8.0 10.5 |
|
Mechanical Properties Of SS Werkstoff No 1.4301 Shim Sheet
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | ||||
|
304 |
515 |
205 |
40 |
92 |
201 |
|
304H |
515 |
205 |
40 |
92 |
201 |
Tp 304 SS Foils Equivalent Chart
| rade | UNS No | Old British | Euronorm | Swedish SS | Japanese JIS | ||
| BS | En | No | Name | ||||
|
304 |
S30400 |
304S31 |
58E |
1.4301 |
X5CrNi18-10 |
2332 |
SUS 304 |
|
304H |
S30409 |
304S51 |
- |
1.4948 |
X6CrNi18-11 |
- |
- |
High quality Hot Rolled SUS 304 Checker Plates, UNS S30400 Cold Rolled Sheet density, Ss 304 Sheet, ASME SA240 Stainless Steel 304 Plate Price in Mumbai.
SS 304 Perforated Sheet Price
| Stainless Steel 304 Plate Price List |
ASTM A240 Type 304 Sheet Per Unit (INR) |
|---|---|
|
2mm 304 stainless steel plate |
$1,400.00-$1,600.00/ Ton |
|
ss 304 mirror Stainless Steel Coil/ Strip/ Sheet |
$1,200.00-$1,800.00/ Metric Ton |
|
304 Stainless Steel Plate / Stainless Steel Sheet 304 |
$1.70-$2.20/ Kilogram |
|
Standard size 4x8 metal sus 304 grade stainless steel checkered Sheet prices |
$1.48-$1.98/ Kilogram |
Get the Reference About Material Quality in Your Country
| 2b ba ss coil 304 steel stainless | Malaysia, Europe, Japan, Romania |
| mirror finish stainless steel 304 sheets | China, Sweden, Colombia, Malaysia |
| 1" x 4.25" Stainless Plate 304 Annealed HRAP | Philippines, Malaysia, Taiwan, Los Alamos -Mexico |
| 0.2mm thick stainless steel 2b finish 304 Plate | Malaysia, Singapore, South Korea, NY 12203 (USA) |
| 304 cold rolled stainless steel sheets plate | Belgium, Dammam -KSA, Indonesia, Philippines |
| Plate 304 No.1 2B BA HL Mirror Stainless Steel Perforated | Thailand, Qatar, France, Europe |
| Mirror 6mm Grade 304 Stainless Steel Sheet 2b Finish | Malaysia, Czechia, Germany, Thailand |
| 0.35mm Cold Rolled BA Mirror Stainless Steel Sheet Coil 304 | Dubai, Netherlands, Malaysia, Russia |
| Cold rolled stainless steel coil Sheet 304 1.0mm thick | UK, Egypt, Spain, Mexico |
| aisi 304 2b stainless steel sheet | UAE, United Kingdom -UK, Europe, Malaysia |
| 3mm ss304 stainless steel sheet | Ellington -United States, UK, Canada, Poland |
| 0.018" Stainless Sheet 304 Annealed #4 | Singapore, Philippines, Malaysia, Canada |
| 304 Perforated Stainless steel plate 3X1000X2000mm | Finland, Malaysia, USA, Bangladesh |
| ASME SA240 Stainless Steel 304 Plate | Brazil, South Africa, Saudi Arabia (KSA), Kuwait |
| BA Hairline Mirror finish ss 304 sheet | Singapore, Bahrain, South Africa, Singapore |
| 304 decorative perforated stainless steel sheet | Nigeria, Philippines, Australia, UK |
| No. 4 finish Stainless Steel 304 Sheet | UAE, Oman, Malaysia, Hong Kong |
| 2mm Embossed 4x8 Checker Black Decorative 2B Mirror 304 Stainless Steel Sheet | Singapore, Chile, Italy, Iran |
| 4x8 metal sus 304 grade stainless steel checkered Sheet | Malaysia, United Arab Emirates (UAE), Turkey, Norway |