2024 Aluminum Sheet, Aa2024 T351 Hot Rolled Plate supplier in India
Aluminum that is pure is very soft and extremely ductile. To improve the mechanical characteristics of the metal, it is alloyed to yield better results. For instance, the 2024 Aluminum Plate consists chemically of copper, with copper being its primary alloyant after aluminum. One similarity it shares with titanium is that the Al 2024 T4 Chequered Plates offer a high strength to weight ratio, which means the density of the alloy is lower than most conventional steel alloys. Though the corrosion resistance properties of the 2024 T3 Aluminum Sheet is significantly lower as compared to the other aluminum alloys, the alloy could be clad with Al-1Zn. When clad with Al-1Zn, it protects the alloy. However, this protection is available for a price. This means that the fatigue resistance, which was previously high for a 2024 T4 Aluminum Sheet undergoes a reduction. As usual, tempering the material will deliver better results.
2024 T351 Aluminum Plate
Alclad Aa2024 T4 Clad Sheet
2024 Aluminum Sheet
2024 Aluminum Plate, Buy Large Quantity From UNS A92024 Coil, 2024 T4 Sheets At Lowest Price In India
For instance, the temper designation T4 means the material is solution treated, followed by subsequent 2024 T4 Sheet is to be naturally aged. On the other hand, the designation temper T351 has the ultimate tensile strength valued at about 470 MPa. Apart from being solution heat treated, the Aa2024 T351 Clad Plate is required to undergo artificial aging. Since the material has been aged artificially, the 2024 T351 Plate gains the ability to resist stress corrosion.
Table of Content
Equivalent of 2024 T351 Aluminum Plate
| European Standard | OLD | WNr | UNS | ISO | USA (AA) | GERMANY (DIN) |
| AW-AlCu4Mg1 | AU4G1 | 3.1355 | A92024 | AlCu4Mg1 | 2024 | AlCuMg2 |
Different Types of 2024 Aluminum Sheet
Brushed Aluminum Plate 2024
2024 Aluminum Plate
Color Coated Aluminum Corrugated Roofing Plate 2024 Metal Sheet
2024 T4 Aluminum Sheet 6mm Aluminum Plate
Aluminum Alloy 2024 Sheet Plate T351 / T4
2024 T351 Aluminum Alloy Plate/sheet
2024 T4 Aluminium Plate
Aluminum Plate 2024 T351
2024 T3 T351 Aluminum Alloy Sheet /plate
Aa2024 T351 Hot Rolled Plate Size Chart
| Size (in inches) | Size (in mm) |
|---|---|
| .125 | 3.18 |
| .134 | 3.40 |
| .156 | 3.96 |
| .187 | 4.75 |
| .250 | 6.35 |
| .312 | 7.92 |
| .375 | 9.53 |
| .500 | 12.7 |
| .600 | 15.9 |
| .750 | 19.1 |
| .875 | 22.2 |
| 1 | 25.4 |
| 1.125 | 28.6 |
| 1.250 | 31.8 |
| 1.500 | 38.1 |
| 1.750 | 44.5 |
| 2 | 50.8 |
| 2.500 | 63.5 |
| 3 | 76.2 |
View DIN 3.1355 Chequered Plates, 2024 T4 Aluminum Sheet, Check Al 2024 T4 Foil Dimension
Dimension Table of 2024 Aluminum Plate
| Plate Surface finish | Thickness (mm) | Width (max mm) |
|---|---|---|
| 2B – Cold rolled, heat treated, pickled, skin passed Sheet | 0.25–8.0 | 2032 |
| 2D – Cold rolled, heat treated, pickled Sheet | 0.4–6.35 | 1524 |
| 2E – Cold rolled, heat treated, mechanically descaled plate | 0.4–8.0 | 2032 |
| 2R – Cold rolled, bright annealed plate | 0.25–3.5 | 1524 |
| 2H – Work hardened plate | 0.4–6.35 | 1524 |
| Polished, brushed plate | 0.5–4.0 | 1524 |
Alclad Aa2024 T4 Clad Sheet Imperial Dimensions
| Plate Surface finish | Gauge (in) | Width (max in) |
|---|---|---|
| 2B – Cold rolled, heat treated, pickled, skin passed Plate | 10–24 | 72* |
| 2D – Cold rolled, heat treated, pickled plate | 12–24 | 60 |
| BA Mexinox only | 18–28 | 48 |
| Polished Sheet (not brushed) | 11–24 | 60 |
| Temper rolled Sheet Mexinox only | 13–29 | 48 |
UNS A92024 Coil Spec Table
| Specifications | ASTM B209 / ASME SB209 |
| Standard | ASTM, ISO, GB, DIN, EN, etc |
| Thickness | 0.2~300mm |
| Width | 500~2500mm |
| Length | 500~10000mm |
| Aluminum Plate Coating | PVC Coated, Color Coated, Polyester, Fluorocarbon, polyurethane and epoxy coating |
| Temper | O, F, H12, H14, H16, H18, H19, H22, H24, H26, H32, H34, H36, H38, H111, H112, H321, T3, T4, T5, T6, T7, T351, T451, T651, T851 |
| Form | Coils, Foils, Rolls, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) |
Chemical Structure of 2024 T4 Sheets
| Grade | Al | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Other |
| min. | Bal | 3.80 | 0.30 | 1.20 | ||||||
| max. | Bal | 0.50 | 0.50 | 4.90 | 0.90 | 1.80 | 0.10 | 0.25 | 0.15 | 0.05 |
We Have Years Of Expertise In Supplying 2024 T3 Aluminum Sheet, Alclad 2024 Strips Properties, 2024 Aluminium Sheets At Our Stockyard
DIN 3.1355 Chequered Plates Mechanical Properties
| Temper | Tensile Strength | Yield Strength | Elongation |
| KSI | KSI | % | |
| (annealed) | 32 | 14 | 12 |
| T3 | 63 | 42 | 15 |
Manufacturers of En Aw 2024 T351 Shim Sheet, 2024 Clad Plate, Check Weight of Alclad Aluminum Sheet, 2024 Sheet
Weight Chart of 2024 T4 Aluminum Sheet
| Thickness Chart in Inches | Plate Weight per Unit Area | Density |
|---|---|---|
| 3/16 | 0.06000 lbs/in²42.184176 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1/4 | 0.08 lbs/in²56.245568 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3/8 | 0.121 lbs/in²85.0714216 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1/2 | 0.161 lbs/in²113.1942056 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 5/8 | 0.196 lbs/in²137.8016416 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3/4 | 0.235 lbs/in²165.221356 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 7/8 | 0.274 lbs/in²192.6410704 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 | 0.313 lbs/in²220.0607848 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 1/4 | 0.391 lbs/in²274.9002136 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 1/2 | 0.47 lbs/in²330.442712 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 3/4 | 0.549 lbs/in²385.9852104 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 | 0.627 lbs/in²440.8246392 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 1/4 | 0.705 lbs/in²495.664068 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 1/2 | 0.784 lbs/in²551.2065664 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 3/4 | 0.862 lbs/in²606.0459952 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3 | 0.941 lbs/in²661.5884936 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2024 T3 Aluminum Sheet Uses
- Structural or Architectural applications
- Frames
- Rails
- Automotive components
- Building and Architecture
- Domestic and Office Furniture
- Transmission Towers
- Furniture Applications
- Scaffolding
Price List of Al 2024 T4 Foil
| 2024 T351 Aluminum Plate Price List | Aluminum Alloy 2024 Sheet Price List |
| 2024 Aluminum plate | US $1.92-$2.85 / Kilogram |
| 2024 T3 T6 aluminum sheet | US $2.00-$5.00 / Kilogram |
| 2024 t4 aluminum sheet 6mm aluminum plate | US $2000-$2500 / Ton |
we Stock in India and supply in below countries
| 2024 Aluminum Plate | Bahrain, South Africa, Singapore |
| 2024 Aluminum Sheet | Thailand, France, Europe, Qatar |
| 2024 T351 Plate | Australia, Philippines, Nigeria, UK |
| Aa2024 T351 Cold Rolled Sheet | Hong Kong, Oman, Malaysia, UAE |
| 2024 T4 Sheet | Malaysia, USA, Finland, Bangladesh |
| 2024 T4 Aluminum Sheet | Chile, Italy, Iran, Singapore |
| 2024 T3 Aluminum Sheet | Norway, Malaysia, United Arab Emirates (UAE), Turkey |
| Alclad Sheet | Indonesia, Belgium, Dammam -KSA, Philippines. |
| 2024 Aluminium Sheet | Malaysia, Philippines, Canada, Singapore |
| Alclad Aluminum Sheet | UK, Mexico, Egypt, Spain |
| En Aw 2024 T351 Hot Rolled Sheet | Poland, Canada, Ellington -United States, UK |
| Aluminum Plate 2024 T3751 3mm 12mm/cold Rolled Aluminum Plate | Europe, UAE, United Kingdom -UK, Malaysia |
| 2024 T3 Exterior Aluminum Chequered Sheet / Plate | Malaysia, Japan, Europe, Romania |
| 2024 Aluminum Metal Plate | Czechia, Malaysia, Germany, Thailand |
| Power Coated T5 Aluminium Plate 2024 T81 | Sweden, China, Colombia, Malaysia |
| 2mm 3mm 5mm 10mm Thick T4 T35 T6 2024 Aluminum Plate | Netherlands, Russia, Dubai, Malaysia |
| 2024 Aluminium Checker Plate 8 X 4 Sheet | Saudi Arabia (KSA), Kuwait, South Africa, Brazil |